help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo
#1
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: 43257 Osgood Rd. Fremont, CA 94539
Posts: 45,428
Likes: 0
Received 0 Likes
on
0 Posts
help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo
anyways .. we had the home made turbo kit on our D16a6 motor and it ran good and finally somethign went .. we tore off the head and everything looks good .. no cracked sleeves etcc. we thought bout rebuilding it but we got a hold of a D16Z6 for a really good price. we just swapped it in today along with the home made turbo kit
14B turbo, ported turbine housing, ported HF manifold, 2 inch mandrel bent charge pipes, 2.5 inch mandrel bent downpipe, no cats, 3 inch mandrel bent exhaust, DSM 450CC injectors, filetofits chip, 1st gen DSM BOV, SS bradided oil feed line, ACT clutch, 12lb flywheel,
anways with the D16a6 it pulled like a bat out of hell
i took the D16Z6 set up aroudn the block .. around 4K it hesitates a lot it starts jerking etcc ... what coudl be wrong ?? 1st gear it would go just great .. no hesitation but any other get and itll start to bog and jerk back n forth .. and the boost goes up n down .. HLEP !
[Modified by project dc2, 3:22 AM 11/28/2002]
[Modified by project dc2, 8:54 AM 11/28/2002]
14B turbo, ported turbine housing, ported HF manifold, 2 inch mandrel bent charge pipes, 2.5 inch mandrel bent downpipe, no cats, 3 inch mandrel bent exhaust, DSM 450CC injectors, filetofits chip, 1st gen DSM BOV, SS bradided oil feed line, ACT clutch, 12lb flywheel,
anways with the D16a6 it pulled like a bat out of hell
i took the D16Z6 set up aroudn the block .. around 4K it hesitates a lot it starts jerking etcc ... what coudl be wrong ?? 1st gear it would go just great .. no hesitation but any other get and itll start to bog and jerk back n forth .. and the boost goes up n down .. HLEP !
[Modified by project dc2, 3:22 AM 11/28/2002]
[Modified by project dc2, 8:54 AM 11/28/2002]
#2
Honda-Tech Member
Join Date: Jul 2002
Location: Where N/A is Not Applicable
Posts: 4,361
Likes: 0
Received 0 Likes
on
0 Posts
Re: help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo (project dc2)
Perhaps its the tune the sohc vtec engines have higher compression then the D16A6, what are you using to add extra fuel..
#5
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: 43257 Osgood Rd. Fremont, CA 94539
Posts: 45,428
Likes: 0
Received 0 Likes
on
0 Posts
Re: help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo (willyboyD16)
is the vtec connected?
#6
Honda-Tech Member
Join Date: Jan 2002
Location: Minneapolis, MN, usa
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo (project dc2)
Yikes! thats pretty much my proposed set up. I'm gonna use a wideband to check everything out once it gets put in but I'd say remove/disconect the turbo kit and get the problem solved from there. Boost just makes little problems worse.
#7
Re: help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo (G2turbo_terror)
what are using to control your injectors? I'm running the smc. I just took off the pm6 computer and put in the p28 today. now it seems to ping sometimes above 4500. mostly in second and third gear. probably just my need 4 bigger exhaust. still don't think its pulling harder than the pm6. I had it tuned pretty well.
(remove/disconect ) ha! I thought he wrote remove/discard the turbo at first! pays to read stuff twice sometimes.
(remove/disconect ) ha! I thought he wrote remove/discard the turbo at first! pays to read stuff twice sometimes.
Trending Topics
#8
B*a*n*n*e*d
Join Date: Aug 2001
Location: Todays date is, UK
Posts: 2,966
Likes: 0
Received 0 Likes
on
0 Posts
Re: help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo (civicwagonman)
sounds like its running lean. need to add in some fuel..this is where the v-afc hack is better then the smc...you can ad fuel % at different rpms.
#9
Honda-Tech Member
Join Date: Nov 2002
Location: downingtown, pa, usa
Posts: 1,152
Likes: 0
Received 0 Likes
on
0 Posts
Re: help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo (project dc2)
my turbo h22 did this till i found the vaccum line ti the fpr was kinked. i re did all my lines and now the car has power and boost all the way to 7400. it pulls like a mo fo now
#15
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: 43257 Osgood Rd. Fremont, CA 94539
Posts: 45,428
Likes: 0
Received 0 Likes
on
0 Posts
Re: help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo (project dc2)
update----
installed a NOS in-line fuel pump today, still bogging at 4K RPM etcc, when the mtoor is cold it runs fine, pretty smooth actually, im throwing a code 20 ( electronic overload or somethign), and a code 17 ( VSS-vehicle speed sensor) i thought the 89 civic si uses a cable speedo ?? how can we have this problem ? well anyways, GIVE ME SOME FEEDBACK PEOPLE.... please i need to get this car up n runnin, its gettin on my nerves imma set it on fire
and the starter wont work and im guessin the altenators busted but imma check to see how many volts it pushes out..... soo replY !
installed a NOS in-line fuel pump today, still bogging at 4K RPM etcc, when the mtoor is cold it runs fine, pretty smooth actually, im throwing a code 20 ( electronic overload or somethign), and a code 17 ( VSS-vehicle speed sensor) i thought the 89 civic si uses a cable speedo ?? how can we have this problem ? well anyways, GIVE ME SOME FEEDBACK PEOPLE.... please i need to get this car up n runnin, its gettin on my nerves imma set it on fire
and the starter wont work and im guessin the altenators busted but imma check to see how many volts it pushes out..... soo replY !
#18
Re: help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo (project dc2)
the computer reads from the back of your speedo for the vss. check your connections and reset your codes. might possibly have a bad speedo also.
#20
Honda-Tech Member
Join Date: Jan 2002
Location: Prescott Arizona
Posts: 4,426
Likes: 0
Received 0 Likes
on
0 Posts
Re: help !! hesitation/jerking @ 4000 RPM, D16Z6 in 89 hatch DIY turbo (project dc2)
is the map limiter that you got from filetofit wired in corectly?
Rob
Rob
Thread
Thread Starter
Forum
Replies
Last Post