Front splitter (pics inside)
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: Guatemala, Guatemala
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Front splitter (pics inside)
Been doin' the front splitter for better downforce, but as the OE front lip is very high, about 18 cm from the ground, I did a vertical piece to down the splitter 8 cm with a piece of aluminum, so with this the splitter is at 9 cm from the ground, I think this will help to get better aerodinamics at the road track, just painted in black to see how it looks, but I think will put it in red... what you guys think?
Sorry for the lack of pics, took them with the cellular
Sorry for the lack of pics, took them with the cellular
#7
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: Guatemala, Guatemala
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Re: Front splitter (get RIGHT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by get RIGHT »</TD></TR><TR><TD CLASS="quote">Nice job. Im interested in hearing your on track assessment as well. </TD></TR></TABLE>
Thanks!, I'll be testing the car next week and see if there's a remarkable difference...
Thanks!, I'll be testing the car next week and see if there's a remarkable difference...
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: Guatemala, Guatemala
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Re: (NTCustoms)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NTCustoms »</TD></TR><TR><TD CLASS="quote">how are you attaching the splitter to the car? the rear portion specifically.</TD></TR></TABLE>
I have drilled 2 holes at the rear of the subframe at each side and then bolt the rear of the splitter with nuts at the top.
I have drilled 2 holes at the rear of the subframe at each side and then bolt the rear of the splitter with nuts at the top.
Thread
Thread Starter
Forum
Replies
Last Post
96Civic_Coupe
Honda / Acura
30
07-06-2005 09:00 PM