96ek

i was wondering if anyonw had a diagram or description of how to remove fuel injectors and or fuel rail with injectors?? ( I did a search and came up with nothing.

Any help is greatly appreciated

Thanks in advance

B19CivicHB

Easy.

Unbolt the fuel rail, and bingo, injectors are out. It is literally that easy. Go look at the intake manifold and fuel rail and you'll see how easy it really is.

I believe there are 3 nuts that hold the fuel rail to the intake manifold.

hope that helped a bit,

-Nick-

splitime

release the fuel pressure first, i do the fuel cap and also loosen the nut on the fuel filter....

Evil_Wizard

2 minute job. Like he said just release the pressure first.

96ek

Do you know where I can find a how-to on this?? If not do you know what size sockets i need and is an extension required?? How do the injectors themselvs come out? any trick to it??

I really appreciate your help on this one. ( Iam going to attempt a fuel injector swap with my friend to see if they are the problem)

Thanks in Advance

96ek

up^up^

DeepSi

this is how to change the fuel rail but one more step is to yank the fuel injectors out of the IM.
http://www.c-speedracing.com/howto/f.../fuelrail.html

it is pretty easy just take your time, have a shop towel to catch the little excess gas, and be patient

hope this helps
-deepsi

2000si

i heard that there is a a little screen in front of each injector and if you take that off, you get a little boost in power. has anyone done this, and if so will this effect your motor in any day. any possible problems related to this maybe. oh ya, i have a 00 si
thanks

DeepSi

I have not seen these screens that you are talking about. i replaced my fuel injectors and i looked at my fuel injectors and there was no screen infornt of them. I also have a 2000 civic si.

-deepsi

96ek

Thanks Alot Deep Si, I really appreciate your help.

So if i understand correctly once you have disconected the fuel rail you just yank the injectors out?? will they get damaged?? any trick??

Sorry about all the questions guys but i really don't want to f*** up anything.

Thanks again

96ek

Sorry for the newb questions but I really need the help.

96ek

Anyone???

d16y7ohwell

this is on the pressurized side of the fuel injector and i would find it hard to believe removing the screen would have any effect on performance. i would keep them there. theyre there for a reason... to keep crap outta the fuel injector

sorry for the 11 year bump but i figured it was necessary since nobody addressed this

Chris Dodd

hello,
thank you for updating the post. i myself was wondering what these "plug/screen" things were. would removing them cause it to run rich? i ordered my injectors off of ebay and 3 of them had the screen and the other did not so i installed them withou the screen. i have 1991 civic si.