Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8?
10-29-2007, 10:37 PM
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: San Francisco, CA
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8?
like when I start the car in first gear from a dead stop, will I really notice the power the exhaust provides compare to the stock exhaust? btw i have a aem sri, thanks.
10-29-2007, 10:49 PM
#2
B*a*n*n*e*d
Join Date: Sep 2006
Location: hawaii
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (ShinotakuX)
no.
you won't. sorry.
and if you do, you're just experiencing the placebo effect.
you won't. sorry.
and if you do, you're just experiencing the placebo effect.
10-29-2007, 10:52 PM
#4
Junior Member
Thread Starter
Join Date: May 2007
Location: San Francisco, CA
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (ShinotakuX)
oh man, then what does the damn exhaust do? allowing air to flow better and quicker but no gain or feel of hp/torque increase?
10-29-2007, 11:37 PM
#5
Join Date: Nov 2005
Location: northwest, nj, usa
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (ShinotakuX)
There is a gain but if you want the flow to increase the most you need to go intake/headers/exhaust and still you wont" "feel" any gain. You will notice loder noise and will gain about 10 more HP at the most which isnt really enough to notice a significant gain in pull.
10-29-2007, 11:54 PM
#6
Junior Member
Join Date: Sep 2007
Location: Lowell, Ma, Usa
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (ShinotakuX)
the only way you can feel the horsepower kick in is having your d16y8 turbocharged. and just to add, you can't really feel the v-tec either. it'll be loud while you push it pass 5000rpm or so but you wont feel it.
Trending Topics
10-30-2007, 10:06 AM
#9
Junior Member
Thread Starter
Join Date: May 2007
Location: San Francisco, CA
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (ShinotakuX)
what to do to feel a bit more power besides forced induction?
thank u.
thank u.
10-30-2007, 11:34 AM
#11
Honda-Tech Member
Join Date: Oct 2007
Location: Dallas, Tx, USA
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (ShinotakuX)
I don't think you will notice anything different other than the sound. I've never heard of anyone noticing a 2-5 hp difference. Now if you added 30-40 hp then you will feel something. I went from an Apexi N1 exhaust to the quieter WS2 exhaust and didn't notice any difference except for how quiet the car got. But I have a bunch of bolt-ons so I don't k now if my opinion counts as much.
10-30-2007, 01:14 PM
#12
Join Date: Mar 2007
Location: olathe, ks, us
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (soundpsych)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by soundpsych »</TD></TR><TR><TD CLASS="quote">You can barely hear vtec kick in in a D series even with I/H/E.</TD></TR></TABLE>
You could hear Vtec kick in loud with my old 97 ex. I know a Z6 is quiet even with an intake.
You could hear Vtec kick in loud with my old 97 ex. I know a Z6 is quiet even with an intake.
10-30-2007, 01:15 PM
#13
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (gsr x civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsr x civic »</TD></TR><TR><TD CLASS="quote">no.
you won't. sorry.
and if you do, you're just experiencing the placebo effect.
</TD></TR></TABLE>
+1
you won't. sorry.
and if you do, you're just experiencing the placebo effect.
</TD></TR></TABLE>+1
10-30-2007, 01:44 PM
#14
Honda-Tech Member
Join Date: Jun 2006
Location: CNL, OH, USA
Posts: 2,762
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (crazyguy)
I've done a bunch of your basic bolt-on parts to my Y8 motor; what everyone is saying is correct. You generally won't notice a THING minus the noise factor.
10-30-2007, 06:01 PM
#17
Junior Member
Join Date: Oct 2005
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (vrrodri)
i got mine for 400 shipped....i felt quite an increase with the WS2, of course im running a b18b 
10-30-2007, 06:05 PM
#18
B*a*n*n*e*d
Join Date: Sep 2006
Location: hawaii
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (Cheez-It)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cheez-It »</TD></TR><TR><TD CLASS="quote">i felt quite an increase with the WS2 </TD></TR></TABLE>
no you didn't. you don't need to lie.
no you didn't. you don't need to lie.
10-30-2007, 06:33 PM
#21
Honda-Tech Member
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes
on
2 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (gsr x civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsr x civic »</TD></TR><TR><TD CLASS="quote">
no you didn't. you don't need to lie.
</TD></TR></TABLE>
On an LS you do feel a bit of one, on a stock civic motor, no.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShinotakuX »</TD></TR><TR><TD CLASS="quote">what to do to feel a bit more power besides forced induction?
thank u.</TD></TR></TABLE>
As the king of cars, Archidictus says:
"Boost or nothing"
Low compression, SOHC, four cylinder cars can't make naturally aspirated horsepower for a good price, even if you stroke the **** outta them with a bit widened bore, that can only push you so far. You have any idea how fast Bisi or any of these hardcore NA guys would be if they put all their R&D money into an FI car?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShinotakuX »</TD></TR><TR><TD CLASS="quote">oh man, then what does the damn exhaust do? allowing air to flow better and quicker but no gain or feel of hp/torque increase? </TD></TR></TABLE>
Although that is the premise behind it, the D16Z6 or Y8 isn't a high output motor. You don't need it to breathe better unless it NEEDS to breathe better. It'll need to breathe better if you boost it or something, but in its stock form with it's 9.6 CR and SOHC it's not a high output motor, it's an economy motor, and only difference between the Y8 that steps it up from the Z6 is that the Y8's head and IM design is a bit diff to allow the torque band to start earlier and end later (it's not as far as the Z6 despite it's 2+hp from the factory) - it's a more "daily drivable engine" - you forget that only stupid 16-25 year olds want to rev their car to the redline from every stop-light.
As your car doesn't have a high output motor (in case you missed everything I said it has a low output economy motor built for making the best out of the low power with the shortest D series transmission and the torque curve set lower than the Z6 for better daily drivability), so it doesn't need to breathe better, the stock piping is wide enough, the only thing that happens is the tip changes how it sounds (makes it louder). No change in power though.
A header might give you 0-5hp at the wheels though assuming it's paired with a larger diameter pipe exhaust and a high flow (or no) cat.
no you didn't. you don't need to lie.
</TD></TR></TABLE>On an LS you do feel a bit of one, on a stock civic motor, no.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShinotakuX »</TD></TR><TR><TD CLASS="quote">what to do to feel a bit more power besides forced induction?
thank u.</TD></TR></TABLE>
As the king of cars, Archidictus says:
"Boost or nothing"
Low compression, SOHC, four cylinder cars can't make naturally aspirated horsepower for a good price, even if you stroke the **** outta them with a bit widened bore, that can only push you so far. You have any idea how fast Bisi or any of these hardcore NA guys would be if they put all their R&D money into an FI car?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShinotakuX »</TD></TR><TR><TD CLASS="quote">oh man, then what does the damn exhaust do? allowing air to flow better and quicker but no gain or feel of hp/torque increase? </TD></TR></TABLE>
Although that is the premise behind it, the D16Z6 or Y8 isn't a high output motor. You don't need it to breathe better unless it NEEDS to breathe better. It'll need to breathe better if you boost it or something, but in its stock form with it's 9.6 CR and SOHC it's not a high output motor, it's an economy motor, and only difference between the Y8 that steps it up from the Z6 is that the Y8's head and IM design is a bit diff to allow the torque band to start earlier and end later (it's not as far as the Z6 despite it's 2+hp from the factory) - it's a more "daily drivable engine" - you forget that only stupid 16-25 year olds want to rev their car to the redline from every stop-light.
As your car doesn't have a high output motor (in case you missed everything I said it has a low output economy motor built for making the best out of the low power with the shortest D series transmission and the torque curve set lower than the Z6 for better daily drivability), so it doesn't need to breathe better, the stock piping is wide enough, the only thing that happens is the tip changes how it sounds (makes it louder). No change in power though.
A header might give you 0-5hp at the wheels though assuming it's paired with a larger diameter pipe exhaust and a high flow (or no) cat.
10-30-2007, 07:29 PM
#22
Junior Member
Join Date: Oct 2005
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (vrrodri)
local vendor<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by djessenz »</TD></TR><TR><TD CLASS="quote">$400 from where? </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsr x civic »</TD></TR><TR><TD CLASS="quote">
no you didn't. you don't need to lie.
</TD></TR></TABLE>
when i first swapped my b18b into my hatch i used the stock civic exhaust as a temporary i swear that pipe was like 1inch in diameter
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsr x civic »</TD></TR><TR><TD CLASS="quote">
no you didn't. you don't need to lie.
</TD></TR></TABLE>
when i first swapped my b18b into my hatch i used the stock civic exhaust as a temporary i swear that pipe was like 1inch in diameter
10-30-2007, 07:46 PM
#23
B*a*n*n*e*d
Join Date: Sep 2006
Location: hawaii
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will I notice a gain in hp/torque wise with Apexi WS2 exhaust on d16y8? (Cheez-It)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cheez-It »</TD></TR><TR><TD CLASS="quote"> i swear that pipe was like 1inch in diameter </TD></TR></TABLE>
the pipe? or my dick?
haha. yeah those stock civic exhaust are weak. i think like 5 pencils zip tied together are thicker than it. lolz
</TD></TR></TABLE>the pipe? or my dick?
haha. yeah those stock civic exhaust are weak. i think like 5 pencils zip tied together are thicker than it. lolz
Thread
Thread Starter
Forum
Replies
Last Post
