Notices

good place to hide a kill switch...

Old 10-18-2007, 09:22 PM
  #1  
Thread Starter
 
MIXINinthe805's Avatar
 
Join Date: Oct 2007
Location: Ventura, CA, USA
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default good place to hide a kill switch...

what do you guys think?
Old 10-18-2007, 09:32 PM
  #2  
Honda-Tech Member
 
denraweb's Avatar
 
Join Date: Jun 2005
Location: Fresno, CA
Posts: 941
Likes: 0
Received 1 Like on 1 Post
Default Re: good place to hide a kill switch... (MIXINinthe805)

Rather not say? lol

Use your imagination...
Old 10-18-2007, 10:12 PM
  #3  
B*a*n*n*e*d
 
gourley's Avatar
 
Join Date: Apr 2006
Location: Northeast
Posts: 3,117
Likes: 0
Received 0 Likes on 0 Posts
Default Re: good place to hide a kill switch... (MIXINinthe805)

Right on the steering wheel, make sure you put a sticker under it that says " Kill Switch" so you and others dont forget

j/p, put it somewhere you think no one will notice and thieves wont think it will be there.
AKA under a seat or behind your Cd player. Its your call
Old 10-18-2007, 11:09 PM
  #4  
Honda-Tech Member
 
Foxcow's Avatar
 
Join Date: May 2004
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default Re: good place to hide a kill switch... (gourley)

what would you put the kill switch on? Power for the fuel pump or battery power? Ignition? I really don't know.
Old 10-18-2007, 11:21 PM
  #5  
Honda-Tech Member
 
ef dino's Avatar
 
Join Date: Jul 2006
Location: bloomfield, nj, us
Posts: 426
Likes: 0
Received 0 Likes on 0 Posts
Default Re: good place to hide a kill switch... (Foxcow)

Its all up to you man. No ones gonna give out there hiding spots. Be creative, make a fuel cut switch somewhere and an ignition cut somewhere else. And if you wanna go all out make switches for every damn thing in the car. You can make a switch to control your mothers ******* just be creative with where your putting these switches. Your car, your switches. Hide em good!

My buddys got a setup where you have to hold the cigarette lighter down then push the ac button.. You can do WHATEVER you want. If you have an idea and want directions on how to wire it pm me ill give you a very detailed way of how to wire anything you want. hope that helps a bit
Old 10-18-2007, 11:47 PM
  #6  
Honda-Tech Member
 
JKGONZALEZ3's Avatar
 
Join Date: Jun 2006
Location: Long Beach
Posts: 4,334
Likes: 0
Received 0 Likes on 0 Posts
Default Re: good place to hide a kill switch... (ef dino)

ill tell you mine cause you never get mine started even though i told you were its at. for one of them you have to press the defroster button and wait a certain amount of time before you crank the motor or else it wont crank.
Old 10-19-2007, 05:47 AM
  #7  
Junior Member
 
onenonly009's Avatar
 
Join Date: Oct 2007
Location: Honolulu, Hi, 98822
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default Re: good place to hide a kill switch... (JKGONZALEZ3)

you should make it so u need 2 people to turn a special key at the same time
Old 10-19-2007, 07:45 AM
  #8  
Honda-Tech Member
 
p nut's Avatar
 
Join Date: May 2002
Location: Rockies, USA
Posts: 5,268
Likes: 0
Received 0 Likes on 0 Posts
Default

Go Transporter style and get an ignition code keypad system.
Old 10-19-2007, 08:02 AM
  #9  
Honda-Tech Member
 
KickStart2323's Avatar
 
Join Date: Sep 2006
Location: the dirty south, USA
Posts: 404
Likes: 0
Received 0 Likes on 0 Posts
Default Re: good place to hide a kill switch... (JKGONZALEZ3)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKGONZALEZ3 &raquo;</TD></TR><TR><TD CLASS="quote">ill tell you mine cause you never get mine started even though i told you were its at. for one of them you have to press the defroster button and wait a certain amount of time before you crank the motor or else it wont crank.</TD></TR></TABLE>

can i ask how you did that?...so dose the defroster still work or is it a fake button for the killswitch?
Old 10-19-2007, 08:47 AM
  #10  
Honda-Tech Member
 
jdm Ef-9's Avatar
 
Join Date: Nov 2004
Location: southeast., PA
Posts: 459
Likes: 0
Received 0 Likes on 0 Posts
Default Re: good place to hide a kill switch... (KickStart2323)

got mine @ the ac button...sleeeeeeeper
Old 10-19-2007, 09:04 AM
  #11  
Honda-Tech Member
 
ef9robert's Avatar
 
Join Date: Dec 2004
Posts: 1,366
Likes: 0
Received 0 Likes on 0 Posts
Default

i like this :-)
Old 10-19-2007, 09:05 AM
  #12  
Honda-Tech Member
 
EL Vap133's Avatar
 
Join Date: Jan 2002
Location: Los Angeles, CA, USA
Posts: 26,519
Likes: 0
Received 2 Likes on 2 Posts
Default Re: good place to hide a kill switch... (jdm Ef-9)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm Ef-9 &raquo;</TD></TR><TR><TD CLASS="quote">got mine @ the ac button...sleeeeeeeper</TD></TR></TABLE>

Unless the thief breaks in on a hot/warm day.
Old 10-19-2007, 09:16 AM
  #13  
Honda-Tech Member
 
traxxasx's Avatar
 
Join Date: Oct 2007
Location: las vegas, nevada, clark
Posts: 644
Likes: 0
Received 1 Like on 1 Post
Default

Mines the ciggerette lighter..BAHAHA you cant start it without the ciggerette lighter pushed in....
Im sure noone has this or even knows..well now they do owell..

AHha better have a ecu with you 2.
Old 10-19-2007, 09:21 AM
  #14  
Honda-Tech Member
 
JG90CRX-Si's Avatar
 
Join Date: Jun 2003
Location: Houston, Texas, USA
Posts: 435
Likes: 0
Received 1 Like on 1 Post
Default Re: good place to hide a kill switch... (EL Vap133)

I did mine a while back and although I won't give the location, I have to turn into a pretzel to turn it off/on. Sometimes I forget it's on and crank the ignition and in a second or two the car turns off.

It's in a great place that's not visible and still easily missed with a flash light.

Thanks H-T for the great write up.

JG
Old 10-19-2007, 03:39 PM
  #15  
Thread Starter
 
MIXINinthe805's Avatar
 
Join Date: Oct 2007
Location: Ventura, CA, USA
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

its gonna be on the fuel pump. i had a friend rig it up to the ignition, than it fried his harness, so i figured i'll call that one skip.

someone else i met had a magnet switch in his dash. you just put it next to the panel to get it started, but i haven't been able to find anything like that, or even a specail key switch for that matter
Old 10-19-2007, 03:51 PM
  #16  
Honda-Tech Member
 
ITR640's Avatar
 
Join Date: Jan 2004
Location: USA
Posts: 949
Likes: 0
Received 0 Likes on 0 Posts
Default

I dont have one but....

I like the idea of using a preexistinf switch or button. YOu could even get a foglight switch or cruise switch and use it to be your kill switch.

Or maybe that button that makes that little JDM parking pole thing work and use it as a kill switch.
Old 10-19-2007, 04:12 PM
  #17  
Honda-Tech Member
 
tougetuned_ef's Avatar
 
Join Date: Jun 2006
Location: SLC UT/PHILLY
Posts: 1,477
Likes: 0
Received 1 Like on 1 Post
Default Re: (ITR640)

i heard one time of a guy rigged up a click pen in his ceter console so you have to click the pen once to start the car. i know that if was to try to steal a car i wouldnt think to click the pen once to start it. jsut think like a car thief and you will come up with something creative. i met a guy at a meet who put on of those key pads in and he said not even 3 days after he put it in someone tried to steal his car and couldnt do it. it was set up so if you try to take the keypad off it would never start.
Old 10-19-2007, 04:51 PM
  #18  
Honda-Tech Member
 
grog's Avatar
 
Join Date: Jan 2007
Location: Humboldt, ca, usa
Posts: 1,748
Likes: 0
Received 1 Like on 1 Post
Default Re: (tougetuned_ef)

some<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MIXINinthe805 &raquo;</TD></TR><TR><TD CLASS="quote">someone else i met had a magnet switch in his dash. you just put it next to the panel to get it started, but i haven't been able to find anything like that, or even a specail key switch for that matter</TD></TR></TABLE>

I've heard of using "home security" switches like for a window, its 2 magnets that when placed together complete the switch. so you hide one of the magnets behind something, dash,carpet, or anywhere . to "flip the switch" you stick the other magnet there. when you park take the magnet with you

I believe there are some security write ups if you search, much more detailed than the above
Old 10-19-2007, 05:16 PM
  #19  
Honda-Tech Member
 
KrenzyRyan's Avatar
 
Join Date: Feb 2006
Location: Mesa, AZ, US
Posts: 346
Likes: 0
Received 0 Likes on 0 Posts
Default Re: good place to hide a kill switch... (ef dino)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ef dino &raquo;</TD></TR><TR><TD CLASS="quote">You can make a switch to control your mothers ******* just be creative with where your putting these switches. </TD></TR></TABLE>

Thats just weird
Old 10-19-2007, 05:24 PM
  #20  
Torque Junkie
 
Trakhor's Avatar
 
Join Date: Aug 2007
Location: Race City USA, NC, USA
Posts: 858
Likes: 0
Received 0 Likes on 0 Posts
Default

If I told you I'd have to "kill" you.

General rule of thumb is put it in plain sight but not obvious.

I knew a guy who rigged up a relay to his "power antenna" feed on his radio. He turned the key on then the radio, then he could start.
Old 10-24-2007, 03:51 PM
  #21  
Thread Starter
 
MIXINinthe805's Avatar
 
Join Date: Oct 2007
Location: Ventura, CA, USA
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (grog)

the home security peice souunds like it makes more sense. would something like that wire up with a 12 volt system though?
Old 10-24-2007, 04:33 PM
  #22  
Honda-Tech Member
 
Tippyman's Avatar
 
Join Date: Jul 2004
Location: VA, USA
Posts: 9,846
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (MIXINinthe805)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MIXINinthe805 &raquo;</TD></TR><TR><TD CLASS="quote">the home security peice souunds like it makes more sense. would something like that wire up with a 12 volt system though?</TD></TR></TABLE>

If it can handle house voltage, it can certainly handle 12v.
Old 10-24-2007, 04:50 PM
  #23  
Honda-Tech Member
 
Fuzzy Rhubarb's Avatar
 
Join Date: Aug 2007
Location: Anchorage
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default

Sounds like a job for some Microchip PICS.
Old 10-24-2007, 05:20 PM
  #24  
Member
 
Wes V's Avatar
 
Join Date: Oct 2002
Location: Winnetka, Calif, USA
Posts: 2,351
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Fuzzy Rhubarb)

Here is a link to a page that shows hiding a magnetic reed switch;

http://www.performanceforum.com/bob/bob6/bob6.html

Wes
Old 10-24-2007, 05:22 PM
  #25  
Honda-Tech Member
 
Fuzzy Rhubarb's Avatar
 
Join Date: Aug 2007
Location: Anchorage
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Wes V)

Wire up a fingerprint reader.

Thread Tools
Search this Thread
Quick Reply: good place to hide a kill switch...



All times are GMT -8. The time now is 12:36 PM.