changing reverse light bulb
#1
Thread Starter
Join Date: Sep 2007
Location: honolulu, hi, usa
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
changing reverse light bulb
two part post: first; how in difficult is it to change the reverse light bulb? havent taken a look yet but figured id ask too.
second; anyone use led bulbs to replace the standard fillament bulb?
second; anyone use led bulbs to replace the standard fillament bulb?
#2
Honda-Tech Member
iTrader: (3)
Join Date: Jun 2007
Location: Stuttgart
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Re: changing reverse light bulb (runhopskipendub)
Changing any light bulbs is simple. The rears are easier than the front if that what you want to hear. Easier by means of you won't have to wash your hands after changing bulbs. The front as you know are cover by the fender liner so it's dirty.
Anyways, I would recommend against the LED bulbs because standard filaments will do the job just fine. LED might short-blind other drivers...depending on how bright they are. Check with your local law enforcement rules on light bulb use.
If you are going to use japan spec taillights then only LED standard are brake lights.
Anyways, I would recommend against the LED bulbs because standard filaments will do the job just fine. LED might short-blind other drivers...depending on how bright they are. Check with your local law enforcement rules on light bulb use.
If you are going to use japan spec taillights then only LED standard are brake lights.
#3
Thread Starter
Join Date: Sep 2007
Location: honolulu, hi, usa
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: changing reverse light bulb (Sturmmann)
we recently had the widows tinted and i dont want to use high watt bulbs. changing rears easier than fronts....exactly what i wanted to hear
Thread
Thread Starter
Forum
Replies
Last Post