Turbo GSR cutting out
#1
Turbo GSR cutting out
This is the second turbo kit my friend has put on his car..
at around 7,000 rpm and 7,500 rpm it cuts out really bad and it won't let the motor rev higher.. we thought it was the plug gap but it turns out it wasn't.. the gap is at 0.032 right now and we started from a 0.038. and it doesn't feel any different
we know the motor is getting enough fuel because when we let off it has a nice backfire..
any suggestions or help would be appriciated
at around 7,000 rpm and 7,500 rpm it cuts out really bad and it won't let the motor rev higher.. we thought it was the plug gap but it turns out it wasn't.. the gap is at 0.032 right now and we started from a 0.038. and it doesn't feel any different
we know the motor is getting enough fuel because when we let off it has a nice backfire..
any suggestions or help would be appriciated
#3
Junior Member
Join Date: Jul 2004
Location: perry, ga, usa
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
gap them at .028 and make sure you have good wires. if the plug wires are failing you are not prividing strong spark adn you are spark knocking. rotor button could be it too. just start checking everything in the ignition system. do you have a msd or anything on this car? you ned to check rotor, cap, plug wires, coil and ignitor. also is this car tuned???
#4
i ♥ snails
Join Date: Aug 2004
Location: hmt noggs
Posts: 2,293
Likes: 0
Received 0 Likes
on
0 Posts
i would just get new rotor, clean the cap, new plug wires just for good measure, its always good to keep the ignition system in top shape when running higher cylinder pressures.
#5
Junior Member
Join Date: Aug 2006
Location: Oklahoma City, OK
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Re: (quicksilver1689)
the car is on a s300 hondata base map.i think ill try to do the rotor bug first then wires after that.. thanks for input bump for more
Trending Topics
#8
Honda-Tech Member
Join Date: Sep 2007
Location: Tampa, Fl, united states
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo GSR cutting out (ohsnapzafingcu)
i dont understand how you can even get on the motor with a basemap? when i had my basemap in before my tune the car wouldnt rev over 5500 and it didnt build any boost
#10
Junior Member
Join Date: Jul 2007
Location: sacramento, ca, usa
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo GSR cutting out (ohsnapzafingcu)
Check your timing, it might be off. I had the same problem in my b16 turbo, and my timing was off and at high rpm's it will cut off just like your case
#11
Honda-Tech Member
iTrader: (1)
Join Date: May 2002
Location: Lower East Side Holly, PA, usa
Posts: 1,056
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo GSR cutting out (HarfordCTR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HarfordCTR »</TD></TR><TR><TD CLASS="quote">why are you at 7500 rpm's on a basemap? U want to blow it up?</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HarfordCTR »</TD></TR><TR><TD CLASS="quote">why are you at 7500 rpm's on a basemap? U want to blow it up?</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HarfordCTR »</TD></TR><TR><TD CLASS="quote">why are you at 7500 rpm's on a basemap? U want to blow it up?</TD></TR></TABLE>
#14
Honda-Tech Member
Join Date: Sep 2003
Location: miami, fla, us
Posts: 2,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: (toekneexD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toekneexD »</TD></TR><TR><TD CLASS="quote">the car is on a s300 hondata base map.i think ill try to do the rotor bug first then wires after that.. thanks for input bump for more </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ohsnapzafingcu »</TD></TR><TR><TD CLASS="quote">
we know the motor is getting enough fuel because when we let off it has a nice backfire..
any suggestions or help would be appriciated </TD></TR></TABLE>
thats not the way you check air fuel...the car needs to be tuned
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ohsnapzafingcu »</TD></TR><TR><TD CLASS="quote">
we know the motor is getting enough fuel because when we let off it has a nice backfire..
any suggestions or help would be appriciated </TD></TR></TABLE>
thats not the way you check air fuel...the car needs to be tuned
#16
Re: (boostedh22lude1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedh22lude1 »</TD></TR><TR><TD CLASS="quote">sounds like a timing issue, but could also be a map problem what map and setup are you useing?</TD></TR></TABLE>
b16 with greddy turbo kit, the motor has more then enough fuel. and i believe the basemap is better then a FMU..
we ran the same map on a previous boost setup and it worked flawless to 8 grand. now we can't seem to get past 7,500... we'll double check all the ignition this weekend.. thanks for the bump guys!
b16 with greddy turbo kit, the motor has more then enough fuel. and i believe the basemap is better then a FMU..
we ran the same map on a previous boost setup and it worked flawless to 8 grand. now we can't seem to get past 7,500... we'll double check all the ignition this weekend.. thanks for the bump guys!
#17
Honda-Tech Member
Join Date: Sep 2003
Location: miami, fla, us
Posts: 2,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ohsnapzafingcu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ohsnapzafingcu »</TD></TR><TR><TD CLASS="quote">
b16 with greddy turbo kit, the motor has more then enough fuel. and i believe the basemap is better then a FMU..
we ran the same map on a previous boost setup and it worked flawless to 8 grand. now we can't seem to get past 7,500... we'll double check all the ignition this weekend.. thanks for the bump guys!</TD></TR></TABLE>
having more then enough fuel is also a problem. the car isnt tuned. you dont know what the air fuel is you dont know what the ignition timing is. you should really check these major things before you ask for help
b16 with greddy turbo kit, the motor has more then enough fuel. and i believe the basemap is better then a FMU..
we ran the same map on a previous boost setup and it worked flawless to 8 grand. now we can't seem to get past 7,500... we'll double check all the ignition this weekend.. thanks for the bump guys!</TD></TR></TABLE>
having more then enough fuel is also a problem. the car isnt tuned. you dont know what the air fuel is you dont know what the ignition timing is. you should really check these major things before you ask for help
#18
Re: (D@nnY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D@nnY »</TD></TR><TR><TD CLASS="quote">
having more then enough fuel is also a problem. the car isnt tuned. you dont know what the air fuel is you dont know what the ignition timing is. you should really check these major things before you ask for help</TD></TR></TABLE>
so we hooked up a wideband and the a/f is 11:5-12:5 from vtec all the way up to 7,500. then it cuts out. after tightning the gap down the 0.030 it didn't even seen to help. what other things could be the problem? it's not the rotor bug, cuz we replaced it
having more then enough fuel is also a problem. the car isnt tuned. you dont know what the air fuel is you dont know what the ignition timing is. you should really check these major things before you ask for help</TD></TR></TABLE>
so we hooked up a wideband and the a/f is 11:5-12:5 from vtec all the way up to 7,500. then it cuts out. after tightning the gap down the 0.030 it didn't even seen to help. what other things could be the problem? it's not the rotor bug, cuz we replaced it
#20
Junior Member
Join Date: Aug 2006
Location: Oklahoma City, OK
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Re: (high_octane)
well i got the car tuned. and the car continued to do it.. today i got my exhaust(apexi ws2 piping w/ s2k exhaust) completely on (car was open downpipe before) and now it doesnt cut out anymore. any reason?
#21
Re: (toekneexD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toekneexD »</TD></TR><TR><TD CLASS="quote">well i got the car tuned. and the car continued to do it.. today i got my exhaust(apexi ws2 piping w/ s2k exhaust) completely on (car was open downpipe before) and now it doesnt cut out anymore. any reason?</TD></TR></TABLE>
werd^^^.. i bet noone would've guessed that..
werd^^^.. i bet noone would've guessed that..
#22
Honda-Tech Member
Join Date: Sep 2003
Location: miami, fla, us
Posts: 2,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: (toekneexD)
if you have exhaust dumping under the engine bay it will be pushed back up the firewall and be sucked into the motor.....if its open downpipe it needs to go pretty far back
#23
Re: (D@nnY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D@nnY »</TD></TR><TR><TD CLASS="quote">if you have exhaust dumping under the engine bay it will be pushed back up the firewall and be sucked into the motor.....if its open downpipe it needs to go pretty far back</TD></TR></TABLE>
ooo. good point. cuz alot of the smoke got inside the car when it was windy out
ooo. good point. cuz alot of the smoke got inside the car when it was windy out
Thread
Thread Starter
Forum
Replies
Last Post
egsicxxx
Honda Civic / Del Sol (1992 - 2000)
7
02-03-2013 09:15 AM