highbrid

Has anyone here made there own Plexiglass windows? Im looking to do my whole car. Also what are the rules regarding thickness, mounting, etc. And if anyone has done this could you guide me to a how to on shaping the plexiglass, cutting, and all that.

Thanks

SIINSI

tonyxcom has and they looked awesome!

Here is the post...
https://honda-tech.com/zerothread?id=200463

Miguel


[Modified by SIINSI, 5:41 PM 8/16/2002]

ninesecrx

We do our own on our race car as most of the race cars out there have on theirs as well. Heres a tip to get the black out line under the lexan. Get your whole lexan peices down to shape. Always leave the protectent film on. On what would be the insdie of the window, take an exacto knife and trim out what you want the border to be and peel it away. Then get a rag and spray carb. cleaner on the rag and wipe it all around the open lexan on the border surface to ruff it up. Let it dry for a minute and now you can spray the borders black. Thats how everyone does it.

paulzy

iTrader: (1)

how do you form it to curve like the factory glass?

speedworks

it will form when you bolt it in. use your original windows as your templates for the new ones.

serious crx

i used the old windo as templates and even installed the windos in the doors
if u make them excatly the sam u can even roll them up and down it just takes some patients

ExospeedAMcrx

here's an emergency quick lexan thing we did on the side windows.
The rear hatch has been on for 3 yrs though.

paulzy

iTrader: (1)

what are those little tabs that you're drilling? I've never seen anyone here use tabs

Finest

How do you think they keep it on?....double sided tape?

martini

you gotta rivet to something...

We made door skins because our door were all gutted out. So we just extended the door skins up a little, and riveted on to the skin, instead of trying to have tabs like that.

pics:

hatch and quarter
http://www.fatboyraceworks.com/~ndah...k/DSCF0194.JPG

windshield
http://www.fatboyraceworks.com/~ndah...k/DSCF0207.JPG

sunroof
http://www.fatboyraceworks.com/~ndah...k/DSCF0223.JPG

sunroof and windshield
http://www.fatboyraceworks.com/~ndah...k/DSCF0225.JPG

hatch and sunroof
http://www.fatboyraceworks.com/~ndah...k/DSCF0227.JPG

good picture of the edging we put all around the lexan to clean it up, and the weather sealing putty we used.
http://www.fatboyraceworks.com/~ndah...k/DSCF0228.JPG

fuzzy picture of the door skin
http://www.fatboyraceworks.com/crx/i...r/DSCF0096.jpg

inside of the door skins
http://www.fatboyraceworks.com/~ndahl/crx/DSCF0069.JPG

inside of the sunroof, we had to weld a lip on there, for the lexan to sit on.
http://www.fatboyraceworks.com/~ndahl/crx/DSCF0074.JPG


anyways, I have more pictures, if you would like to see more.

Bserious

What did you use around the edges of the Lexan? Where is the best place to buy 2 sheets of lexan?

martini

it's some of that stuff that you put on the edges of doors to avoid giving chipping your paint along that edge..

We picked it up at an autobody supply store. It also works well around the edges of the fiberglass front end, where it isn't finished very well.

AussieK24

Weight saving on hatch and rear quarters, anyone???
TIA