DOHC ZC 1.6L What parts do I need to upgrade.
10-26-2006, 12:06 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: Kaukauna, WI, USA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
DOHC ZC 1.6L What parts do I need to upgrade.
Thanks to everyone that helped with my past questions but heres a new one. I want to beef up my Dohc ZC internaly. What are the best parts to run and where can i find them? The car will normaly be used for a DD but i want it fast enuff to beat my buddies that are all pushin alot of HP. I would also like to run a small turbo too, so keep that in mind before suggesting parts. The car its going in is a 89 CRX si. If the pm6 ecu can be used from my crx it would be nice since its already chipped.
10-26-2006, 02:57 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: Kaukauna, WI, USA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: DOHC ZC 1.6L What parts do I need to upgrade. (janz3n)
The chip in my pm6 is a Mugen, the red line is 8200 rpms, and i dont know exactly what else it does.
10-26-2006, 04:06 PM
#5
Honda-Tech Member
Join Date: Jul 2004
Location: VA, USA
Posts: 9,846
Likes: 0
Received 0 Likes
on
0 Posts
Re: (cticknor666)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cticknor666 »</TD></TR><TR><TD CLASS="quote">Get rid of the chip first off. Its prolly doin more harm than good, and the chances of it really being a mugen are super slim. Get a PG7?? i belive thats the teg ecu. </TD></TR></TABLE>
Yes, get a PG7.
Internal upgrades are kinda pointless unless your making it stronger for boost. If so, Pistons and rods should work wonderfully.
Yes, get a PG7.
Internal upgrades are kinda pointless unless your making it stronger for boost. If so, Pistons and rods should work wonderfully.
10-26-2006, 04:29 PM
#7
Crazy Honda Guy
ZC rods aren't so great, look into upgrading with B18A/B rods, they are much more stout, many racers use them in "d" seires engines.
Modified by Deetz at 9:57 PM 10/26/2006
Modified by Deetz at 9:57 PM 10/26/2006
Trending Topics
10-26-2006, 06:52 PM
#8
Junior Member
Join Date: Aug 2006
Location: virginia beach, va, us
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
BOTTOM END components
connecting rods
88-91 Civic/CRX Si 1.6L
But any D-series 1.6L rods will work for upgrading.
Pistons
88-89 Integra OEM
There are many companies that offer ZC specific Pistons now, so Aftermarket is there.
Main & Rod bearings and thrust washer bearings
88-91 Civic/CRX si 1.6L
Piston Rings
88-91 Civic/CRX // 86-89 Integra
here ya go......
connecting rods
88-91 Civic/CRX Si 1.6L
But any D-series 1.6L rods will work for upgrading.
Pistons
88-89 Integra OEM
There are many companies that offer ZC specific Pistons now, so Aftermarket is there.
Main & Rod bearings and thrust washer bearings
88-91 Civic/CRX si 1.6L
Piston Rings
88-91 Civic/CRX // 86-89 Integra
here ya go......
Thread
Thread Starter
Forum
Replies
Last Post
eg6ajk
Honda CRX / EF Civic (1988 - 1991)
8
02-15-2002 01:16 PM
