Decided on RS-R ExMag
08-06-2006, 09:21 AM
#3
Member
Join Date: May 2003
Location: Arkham, Asylum PA
Posts: 2,409
Likes: 0
Received 0 Likes
on
0 Posts
Re: Decided on RS-R ExMag (redGSRguy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redGSRguy »</TD></TR><TR><TD CLASS="quote">No, it should fit in the stock location.</TD></TR></TABLE>
Spot on. I replaced my exhaust (after it rusted off from the catback) with a RSR Ex Mag and it bolted right on no problems.
Spot on. I replaced my exhaust (after it rusted off from the catback) with a RSR Ex Mag and it bolted right on no problems.
08-06-2006, 11:16 AM
#5
Member
Join Date: May 2003
Location: Arkham, Asylum PA
Posts: 2,409
Likes: 0
Received 0 Likes
on
0 Posts
Re: Decided on RS-R ExMag (redteg96)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redteg96 »</TD></TR><TR><TD CLASS="quote">where did u find one at? i tried many places and was told they were discontinued.. u got an EX MAG 1 right? not the 2nd one??</TD></TR></TABLE>
I ordered mine a while back. I don't know what constitutes the "2nd" one it looks like a regular exmag and all the piping was black.
I ordered mine a while back. I don't know what constitutes the "2nd" one it looks like a regular exmag and all the piping was black.
08-06-2006, 12:57 PM
#7
Junior Member
Join Date: Mar 2005
Location: Long Beach, CA, United States
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Re: (redteg96)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redteg96 »</TD></TR><TR><TD CLASS="quote">the first one was super quiet, chambered i believe. the exmag II is straight through, which makes it louder</TD></TR></TABLE>
Do not spread the wrong information around.
Taken from http://www.rs-r.com
Each ExMag system is custom tailored for each application. The ExMag muffler can be either a straight through, loop or chambered design.
Do not spread the wrong information around.
Taken from http://www.rs-r.com
Each ExMag system is custom tailored for each application. The ExMag muffler can be either a straight through, loop or chambered design.
Trending Topics
08-06-2006, 10:25 PM
#14
Honda-Tech Member
Re: (jxkim89)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jxkim89 »</TD></TR><TR><TD CLASS="quote">^droollll it looks so stock</TD></TR></TABLE>
The tip is way bigger than stock.
The tip is way bigger than stock.
08-07-2006, 11:58 AM
#18
Junior Member
Join Date: Jul 2006
Location: Mooresville, NC, USA
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
i've always like the RS-R Systems. so clean and nice sounding. i think i saw that the replacement system has already been released. can anyone back me up?
08-07-2006, 02:59 PM
#19
Honda-Tech Member
Join Date: Dec 2000
Location: NY/NJ
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SFrymyah)
http://turboimport.com/catalog/integra.htm
they got the full SS ExMag. I bought a original one for my DA a few months back...i should have held out for the SS. Oh well
mike
they got the full SS ExMag. I bought a original one for my DA a few months back...i should have held out for the SS. Oh well
mike
08-09-2006, 09:59 AM
#23
Honda-Tech Member
Re: Decided on RS-R ExMag (jxkim89)
Awesome choice man! The ExMag is tite! Its quiet and has a sleeper look to it. Too bad they only make it for the 2drs. Id get one for my 4dr if they made them... You dont have to replace ur cat, but I'd get a brand new high-flow one.
08-09-2006, 10:31 PM
#25
Honda-Tech Member
Join Date: Apr 2005
Location: Indianapolis, IN, USA
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jxkim89)
I had that the ex mag on my gsr and it was good. It looks like stock which is good. It is almost as quiet as stock too which is good, but I like a little more exhaust note than what it gives. Good luck with it.
