????Torque specs for pressure plate to flywheel bolts????
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: El Sereno, CA, 90032
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
????Torque specs for pressure plate AND flywheel bolts????
Car: 90 civic wagon.
Motor: with a stock d15b7 (dpfi)
i need to reinstall the flywheel and pressure plate.
i need to know the torque spec for the flywheel? and the pressure plate?
Note: i did a search and i only found torque spec on the flywheel. is this ture?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 02WRX »</TD></TR><TR><TD CLASS="quote">87 ft/lb on D series trannies with 6 flywheel mounting bolts
Eric</TD></TR></TABLE>
Motor: with a stock d15b7 (dpfi)
i need to reinstall the flywheel and pressure plate.
i need to know the torque spec for the flywheel? and the pressure plate?
Note: i did a search and i only found torque spec on the flywheel. is this ture?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 02WRX »</TD></TR><TR><TD CLASS="quote">87 ft/lb on D series trannies with 6 flywheel mounting bolts
Eric</TD></TR></TABLE>
#4
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: El Sereno, CA, 90032
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
Re: ????Torque specs for pressure plate AND flywheel bolts???? (jlicrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jlicrx »</TD></TR><TR><TD CLASS="quote">87 lb-ft for flywheel
19 lb-ft for pressure plate</TD></TR></TABLE>
Thanks
19 lb-ft for pressure plate</TD></TR></TABLE>
Thanks
#5
Junior Member
Join Date: Sep 2005
Location: Marysville, Ohio, USA
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
#6
Junior Member
Join Date: Apr 2003
Location: Lancaster, CA, USA
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
Re: ????Torque specs for pressure plate AND flywheel bolts???? (slowrider)
For performance applications we recommend 30 ftlbs on NEW M10.9 grade bolts. I don't trust tightening old bolts that far, but new ones won't twist off until at least 36 ftlbs. Flywheel bolts can go more than stock recommended torque too. If you are just building a stock motor there is no need though.
Trending Topics
#8
Honda-Tech Member
Join Date: Oct 2005
Location: Rhode Island, USA
Posts: 2,254
Likes: 0
Received 0 Likes
on
0 Posts
Re: ????Torque specs for pressure plate AND flywheel bolts???? (jlicrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jlicrx »</TD></TR><TR><TD CLASS="quote">87 lb-ft for flywheel
19 lb-ft for pressure plate</TD></TR></TABLE> and some blue loctite
19 lb-ft for pressure plate</TD></TR></TABLE> and some blue loctite
#11
Honda-Tech Member
Re: ????Torque specs for pressure plate AND flywheel bolts???? (HondaFerris)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaFerris »</TD></TR><TR><TD CLASS="quote"> and some blue loctite </TD></TR></TABLE>
I've been using those torque specs and red loctite, no issues yet (and I had to take it all apart after a few thousand miles) allthough I use an impact to take it apart.
what kind of pattern do you use for 9 bolts?
I've been using those torque specs and red loctite, no issues yet (and I had to take it all apart after a few thousand miles) allthough I use an impact to take it apart.
what kind of pattern do you use for 9 bolts?
Thread
Thread Starter
Forum
Replies
Last Post
t0p_sh0tta
Honda Accord & Crosstour (2003 - 2012)
2
06-09-2014 10:35 AM