How much horsepower for a b18b on 10psi??
06-08-2002, 12:24 PM
#1
New User
Thread Starter
Join Date: Sep 2001
Location: around, GA, US
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
How much horsepower for a b18b on 10psi??
Hey guys, here is my setup.
Max-rev kit (2 1/2" DP)
98 GS teg
T3T4 63/54
3"exhaust
Hondata
10psi
How much power should I be putting down? Anyone else have a similiar or the same setup?
Max-rev kit (2 1/2" DP)
98 GS teg
T3T4 63/54
3"exhaust
Hondata
10psi
How much power should I be putting down? Anyone else have a similiar or the same setup?
06-09-2002, 10:00 AM
#3
New User
Thread Starter
Join Date: Sep 2001
Location: around, GA, US
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (BG Boost)
ok well, that's what I was expecting. I only put down 205hp/189 ft lb torque. What could be the problem???
06-09-2002, 11:46 AM
#4
Honda-Tech Member
Re: How much horsepower for a b18b on 10psi?? (_Shadow_)
What exhaust are you running? Maybe its too restrictive
<< 3" downpipe, 3" custom exhaust, dyno max muffler
<< 3" downpipe, 3" custom exhaust, dyno max muffler
06-09-2002, 12:32 PM
#6
New User
Thread Starter
Join Date: Sep 2001
Location: around, GA, US
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (GudeH23a)
Alright my exhaust is 3" mandrel bent piping 3" carsound and a 3" magnaflow. Its not restrictive trust me.
I had it tuned but with some difficulty. The hondata stuff was acting up. We couldnt get the datalogging to work so we did the best we could getting the fuel right. I'll post up a dyno graph in a sec so you guys can see whats up.
I had it tuned but with some difficulty. The hondata stuff was acting up. We couldnt get the datalogging to work so we did the best we could getting the fuel right. I'll post up a dyno graph in a sec so you guys can see whats up.
06-09-2002, 12:50 PM
#7
New User
Thread Starter
Join Date: Sep 2001
Location: around, GA, US
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (_Shadow_)
Here is the dyno graph. Will tuning it better bring out 50-80 more horses?? Let me know what you think is the problem. Thanks
Trending Topics
06-09-2002, 07:15 PM
#10
Member
Join Date: May 2001
Location: MASSHOLE
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (95GS-R)
ok im not too sure, but 12.1 maybe a little rich on the fuel. maybe with your set-up 12.1 a/f ratio is safer, but just something to think about.
what is your timing set at??
what is your timing set at??
06-10-2002, 07:38 AM
#13
Junior Member
Join Date: Apr 2002
Location: San JOse, ca, usa
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (_Shadow_)
hmm..i have a revhard 2c, boosting at 7lbs and i'm making 210whp, on a 2inch exhaust.. for 10si, u should out do me by about 30-50 horsepower.. what other mods do u have?
06-10-2002, 07:45 AM
#14
New User
Thread Starter
Join Date: Sep 2001
Location: around, GA, US
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (b18tdelsol)
OK people I know I should have more power. The only mods are whats listed. Those are the only ones that matter. Could something be wrong with my motor? It has 47K on it. It runs smooth and clean. No smoking or anything. Any ideas?
06-10-2002, 08:43 AM
#16
Join Date: Mar 2002
Location: lafayette, la, usa
Posts: 2,018
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (_Shadow_)
no cams, no gears? how do your spark plugs look? did you leave the ac on when you dynoed? lol lots of people go to the track over here and say they left their ac on, but then again they could be ashamed of their of time.
06-10-2002, 09:42 AM
#19
Member
Join Date: May 2001
Location: MASSHOLE
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (Speed PHreak)
for the a/f ratio; try something around 13.1. any leaner might cause some problems.
also, what do you have for tuning aside from hondata??
good luck
Mike D
also, what do you have for tuning aside from hondata??
good luck
Mike D
06-10-2002, 10:26 AM
#20
New User
Thread Starter
Join Date: Sep 2001
Location: around, GA, US
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (Mike D)
Timing is whatever my tuner set it at. (not sure) My spark plugs look good.
NO my a/c was'nt on
I don't have different cams or cam gears.
I'm not sure what you are talking about when you ask "what do you have for tuning aside from hondata??" What else do I need???
You guys think if I lean out my a/f and advance the timing a bit I will pick up alot more horsepower?
Can someone post up a dyno sheet of a turbo b18b with similiar setup so I can compare. I'd like to see the difference in power curves.
NO my a/c was'nt on
I don't have different cams or cam gears.
I'm not sure what you are talking about when you ask "what do you have for tuning aside from hondata??" What else do I need???
You guys think if I lean out my a/f and advance the timing a bit I will pick up alot more horsepower?
Can someone post up a dyno sheet of a turbo b18b with similiar setup so I can compare. I'd like to see the difference in power curves.
06-10-2002, 12:02 PM
#21
Join Date: Dec 2001
Location: WTF DC Racer No Way Turbo Washington., DC, USA
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (_Shadow_)
<--Stock B18b Turbo Read sig. for numbers but mine is tuned like a champ.
I dynoed mine at a mustang place, pure mustangs and they were like WTF!!
I dynoed mine at a mustang place, pure mustangs and they were like WTF!!
06-10-2002, 12:26 PM
#24
New User
Thread Starter
Join Date: Sep 2001
Location: around, GA, US
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (Civicdrgrcr)
**** its not in my sig. but
238hp and 217tq at 8psi
272hp and 238tq at 10psi
238hp and 217tq at 8psi
272hp and 238tq at 10psi
06-10-2002, 12:31 PM
#25
New User
Thread Starter
Join Date: Sep 2001
Location: around, GA, US
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much horsepower for a b18b on 10psi?? (94goldjungsr)
Another thing people, I'm using the wastegate (tial) with I think a .45 bar spring in it to regulate boost. Its the silver Tial I received from Max-Rev. Could there be a problem with the wastegate? Why the hell is it pushing 10psi??? Or is that normal?
