My RHD JDM ITR J-tuner feature pix (56k no)
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: Edinburgh, Scotland
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
My RHD JDM ITR J-tuner feature pix (56k no)
Hey,
J-Tuner (a UK magazine) came out to feature my teg today, after 6 and a half hours they left with 500 pictures (!)
Spec is:
Spoon Coilovers
Front and rear camber kit
Spoon Brakes
Spoon Rear Strut bar
Spoon 4-1 manifold
Cusco 6 Point cage
Cusco master cylinder stopped
Enkei 16x7 NT03R wheels
Yokohama Advan 215/45/16
Lightweight Volk Wheel Nuts
Hondata inlet manifold gasket
Toda Lightweight Flywheel
J's racing decat
Mugen Twinloop exhaust
ARC radiator
Trust oil cooler
Vision intake in carbon enclosed airbox
Shiftsports vented fiberglass wings and bonnet
GReddy oil press/temp and water temp gauges
Vision seat rails for the standard recaros
Nardi steering wheel
Thats about all i can remember!
Anyway-i'll let my pictures do the talking.
Don't quite know when the feature will be out.
Cheers,
John
J-Tuner (a UK magazine) came out to feature my teg today, after 6 and a half hours they left with 500 pictures (!)
Spec is:
Spoon Coilovers
Front and rear camber kit
Spoon Brakes
Spoon Rear Strut bar
Spoon 4-1 manifold
Cusco 6 Point cage
Cusco master cylinder stopped
Enkei 16x7 NT03R wheels
Yokohama Advan 215/45/16
Lightweight Volk Wheel Nuts
Hondata inlet manifold gasket
Toda Lightweight Flywheel
J's racing decat
Mugen Twinloop exhaust
ARC radiator
Trust oil cooler
Vision intake in carbon enclosed airbox
Shiftsports vented fiberglass wings and bonnet
GReddy oil press/temp and water temp gauges
Vision seat rails for the standard recaros
Nardi steering wheel
Thats about all i can remember!
Anyway-i'll let my pictures do the talking.
Don't quite know when the feature will be out.
Cheers,
John
#7
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: Edinburgh, Scotland
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
It's a Vision Carbon airbox. Pretty Rare. It came in a box in the trunk of the car when it was imported from Japan.
It fits snug to the hood with foam. There are two ducts on the base of the hood that feed air to the filter from the leading edge of it.
It fits snug to the hood with foam. There are two ducts on the base of the hood that feed air to the filter from the leading edge of it.