jli18

i have a 96 accord. when i shift gear at 3k rpm or above, the car shake . and it feels like someone hit you from behind.. why is it like that?? is that because the flywheel is no good... plz help

Charri

I'm assuming its stick since you said fly wheel and not torque convertor. I believe your clutch is starting to wear out and is starting to slip.

typhoon

Is it almost a bouncy feel to the car, just after you release your clutch?

madd

not to hijack the thread, but i see now point in creating a new one... my 5th gen auto will shake when shifting up at a certain point. somewhere between 50 and 60 mph. it will shudder pretty bad, but if you lightly press the gas it goes awat. when i let off the gas to let the car slow down by itself (lets so at 60), the car has a horrible time shifting. every downshift is jerky, etc... ideas? it's most likely the tranny seeing as it has 220k on it, but theres a small part of me hoping its something else!

stillrockin18s

Could also be a tranny mount going bad.

jokestar

couldnt it be a motor mount as well?

stillrockin18s

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jokestar &raquo;</TD></TR><TR><TD CLASS="quote">couldnt it be a motor mount as well?</TD></TR></TABLE>

Yeah, it could be. I would start by checking all your mounts.

jli18

i just had my clutch replaces during the summer so it shouldn be the clutch
it shakes real bad if i release the clutch fast, i can even hear the sound from the suspension or something. but if i release it slowly, it will grind

i guess its the engine or tranny mount. do u guys kno where to get it done and how much would it cost

projectTeG

start checking axles too i just fixed the problem with my car because i had a passenger side axle that was binding due to the inner joint being to long