where data link connector(DLC) is located for 96 honda accord and what terminals to connect to obtai
09-16-2005, 10:32 AM
#1
Thread Starter
Join Date: Sep 2005
Location: las vegas, nevada, united states
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
where data link connector(DLC) is located for 96 honda accord and what terminals to connect
to obtain the trouble codes. need to find out if i'm getting any ecm or crank position sensor codes. 96 honda accord lx 2.2 non-vtec
09-16-2005, 11:26 AM
#2
Honda-Tech Member
Join Date: Jun 2004
Location: Garden Grove, CA, Orange County
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Re: where data link connector(DLC) is located for 96 honda accord and what terminals to connect (fra
I believe youre talking about the OBDII connector pin? If so, all you have to do is pull out the ash tray and you'll see the connecting harness. Insert reader and you'll get your cold
09-16-2005, 01:32 PM
#3
Honda-Tech Member
Re: where data link connector(DLC) is located for 96 honda accord and what terminals to connect (fra
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by frank_O »</TD></TR><TR><TD CLASS="quote"> to obtain the trouble codes. need to find out if i'm getting any ecm or crank position sensor codes. 96 honda accord lx 2.2 non-vtec</TD></TR></TABLE>
The DLC for an obd2 scantool is behind the ashtray. But there is a service check connector below the glovebox to pull the codes manually.
The DLC for an obd2 scantool is behind the ashtray. But there is a service check connector below the glovebox to pull the codes manually.
Thread
Thread Starter
Forum
Replies
Last Post
