96CivicBoostCoupe

has anyone ever attempted to do a full F20C swap into a civic, full RWD, drive shaft, diff, subframe. i know honda tuning did the DC2 awd with CRV parts??? some feed back is it possible

K i l l a B e e.

iTrader: (3)

you mean like that? i think its easier if you buy the car itself. =] goodluck on the swap though if you attempt it. It will be one quick car.

96CivicBoostCoupe

i want to attempt it in a ek, anyone else??

Setsuna F Seiei

just do it

kaiba

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by allday &raquo;</TD></TR><TR><TD CLASS="quote">

you mean like that? i think its easier if you buy the car itself. =] goodluck on the swap though if you attempt it. It will be one quick car.</TD></TR></TABLE>
Those it actully move?????

Redline96LX

Hey, I know on EG and EKs you can fit an H22. You can fit a B16, B18, D16, and K20 if ya want to. Since the F20C is an F series, assuming you get a accord M/T, anyone think its possible to mount the F20C transversely and FWD like a F22B or somethin?

sohcvtec1995

a s2k with a accord tranny has been done, retaining the car as a FWD.

kaiba

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohcvtec1995 &raquo;</TD></TR><TR><TD CLASS="quote">a s2k with a accord tranny has been done, retaining the car as a FWD.</TD></TR></TABLE>
What???? where is your source.

Stoich EG2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redline96LX &raquo;</TD></TR><TR><TD CLASS="quote">Hey, I know on EG and EKs you can fit an H22. You can fit a B16, B18, D16, and K20 if ya want to. Since the F20C is an F series, assuming you get a accord M/T, anyone think its possible to mount the F20C transversely and FWD like a F22B or somethin?</TD></TR></TABLE>

an F20 and F series/accord motors have almost no resemblance

Nikos

yes, with some modification that tranny from a kseries car will fit...

the problem in mounting the f20c is that one one side there are no mounting points so that would take some ***** to overcome...

Also what is the point doing a fwd f20c when k series is one step further than f series with the addition of ivtec... Sure the s2000 motor has some nice things about it but the s2000 ecu sucks. I cannot be flashed like the k series ecus can.

96CivicBoostCoupe

i have the money, but the real point is I want to try RWD conversion in a civic, i could throw in an H22 if i wanted but the RWD intrests me

Redline96LX

i was wondering about compatibility and interchangable F series parts and if it WAS doable, i didnt say it was practical. For the cost, id rather go H22, and if I had the cash, id go K20 myself.

Nikos

if you have the money, do something like this






or this

InfamousGizz5

is that last pic a pic of an Ariel Atom ????

Stoich EG2

the atom is the sickest car on the track i've seen online

s2000june

YIKES

eXcelonTypeR

There's a guy on here, don't remember his name thou, but I guess he works for a fabrication shop and they put a big block V8 into a EG with a Funny/Top Fuel car rear end. If you have the money, time, and most of all <U>dedication</U> then do it.

Targa250R

If you have to ask, you're not going to do it.

Ape

hehe

Saw a post like this a few days ago in the S2000 sec.

note sig.

Reid

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96CivicBoostCoupe &raquo;</TD></TR><TR><TD CLASS="quote">i have the money</TD></TR></TABLE>

If you had the money, you wouldn't be driving a Civic. or coming online to ask for help.

/thread

eXcelonTypeR

**** if i had the money and time, I'd do it just for the experiance and doing something different, that is if he's actually going to do the fabrication himself...if not then yeah see above ^^^

DaveSi677

btw if you are asking about that civic with the S2K engine it did run I saw it with my own eyes. He is from Montreal anyways point being is it would be a waste of time trust me he had to back the dash and everything about foot back to make the fucken thing fit in and then he had alot fabrication done to it to make everything else fit. He had the engine bay made a little bigger. But think about it, it is completly not worth it. Plus you dont know what problem you can have long term bc you have no warranty. If I were u just go and get an S2K bc for the money you would have to spend it wouldnt be worth it when you can buy a brand knew one for the same price. Dont forget it took the guy like 1years and couple of months to finish it and have it up and running. In the end it ran but wit no official times.

Dave

JDM-EJ1

Crazy.

EJ6_Hatch

atom = absolutely the sickest car I have ever seen

http://www.openwheelers.com.au...t.mpg

Nova_Dust

Go for it.