04 Cbr 600 rr laid down wont start
03-27-2005, 02:47 PM
#4
Join Date: Jul 2003
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JOJO0420)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JOJO0420 »</TD></TR><TR><TD CLASS="quote">it is not getting power</TD></TR></TABLE>
explain?
explain?
03-27-2005, 02:50 PM
#5
Honda-Tech Member
Join Date: Nov 2001
Location: San Diego, CA
Posts: 6,720
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Reckless636)
try banging on the tail a little. if i remember correctly, there's a ball somewhere in there that tells the bike if it's on its side, and shuts the bike off if laid down. sometimes the ball gets stuck.
somebody back me up on this or tell me im crazy.
somebody back me up on this or tell me im crazy.
03-27-2005, 03:05 PM
#6
Grumpy Old Man
Join Date: May 2001
Location: Westchester
Posts: 4,092
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hybridreams)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridreams »</TD></TR><TR><TD CLASS="quote">try banging on the tail a little. if i remember correctly, there's a ball somewhere in there that tells the bike if it's on its side, and shuts the bike off if laid down. sometimes the ball gets stuck.
somebody back me up on this or tell me im crazy.</TD></TR></TABLE>
You're not crazy, it's the tipover sensor.
When the bike leans to far to one side the circuit is completed and the bike shuts off. Not quite the ball rolling around in the tail that you make it out to be
They are usually in the tail of the bike somewhere
Maybe a 600rr owner will chime in on exactly where it is on your bike.
somebody back me up on this or tell me im crazy.</TD></TR></TABLE>
You're not crazy, it's the tipover sensor.
When the bike leans to far to one side the circuit is completed and the bike shuts off. Not quite the ball rolling around in the tail that you make it out to be
They are usually in the tail of the bike somewhere
Maybe a 600rr owner will chime in on exactly where it is on your bike.
03-27-2005, 03:16 PM
#7
Honda-Tech Member
Join Date: Mar 2001
Posts: 2,466
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RebornGSR)
If you are talking about a "bank angle sensor" it located towards the front, maybe in the nose section? I don't know exactly where, sorry. Wire harness leads towards the rear...
Trending Topics
03-27-2005, 03:20 PM
#9
Junior Member
Join Date: Aug 2003
Location: San Diego, CA
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
Re: (skelly ed666)
Take of side panel
Un-hook (-) of battery
Wait a minute
Re-connect battery
Turn RUN switch to "RUN"
Put bike in neutral
Put UP side stand
Pull clutch lever in
Press start button
VIOLA!! You're bike should start
Un-hook (-) of battery
Wait a minute
Re-connect battery
Turn RUN switch to "RUN"
Put bike in neutral
Put UP side stand
Pull clutch lever in
Press start button
VIOLA!! You're bike should start
03-27-2005, 03:37 PM
#10
Honda-Tech Member
Join Date: Sep 2003
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Re: 04 Cbr 600 rr laid down wont start (JOJO0420)
The bank angle sensor is in the upper that the front most part. I installed mine upside down when switching upper, prevented the bike from starting. I felt like a jackass once I figured it out.
03-27-2005, 05:16 PM
#12
Honda-Tech Member
Join Date: Jul 2002
Location: 919/614
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
yea what reborn said, it's prolly your tip over switch aka fuel cut off causing your bike not to start back up. just wait a few mins the start her back up again. idk how hondas tip over are like but suzuki you would have to wait til the magnetic pendulum gets to its vertical position.
03-27-2005, 09:21 PM
#13
Honda-Tech Member
Join Date: Mar 2003
Posts: 5,285
Likes: 0
Received 0 Likes
on
0 Posts
tilt sensor is in between the headlight lenses behind the upper. it is interesting you have this problem; a friend laid his 04 down and after a while, he held the throttle wide open and kept on cranking. started eventually... you can also bypass the tilt sensor for test purposes but if you can hear your fuel pump you are all set.
03-28-2005, 10:55 AM
#14
Junior Member
Join Date: Sep 2002
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Re: (usdmPC3)
well they say you learn something new everyday...thanks...i will need to know this for when it happens to me since there are only two riders...i have not been down but will keep trying not to...
Thread
Thread Starter
Forum
Replies
Last Post
