92hondalude

where do i get one?

satan_srv

...like what...a differential?

v4lu3s

hond part # 07LAB-PV00100
try that with a hond dealer.
if not try snapon or matco.

PirateMcFred

When I put my ring gear on my Quaife I just took an old cut timing belt and nailed it to the leg of my shop table (4x4). Then I wrapped it around the gear about 1.5 -2 times so that when torquing the bolts the belt got tighter. It is ghetto but worked well.

Pirate

92hondalude

no one at honda know what what part number is

by the way its for a flywheel

v4lu3s

thats the part # listed in the honda manual. so to your worthless honda dealer.
http://www.slhondaparts.com/se...se%21
07LAB-PV00100 RING GEAR HOLDER $89.64

92hondalude

89.64!!!!!!!!!!!!!!!!!!!!!! to hold a flywheel from moving!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hawkze_2.3

Get a big fat guy to hold the flywheel still with a prybar. Hasn't failed me yet...

Prolink

What are you doing that you need a ring gear holder? Is the crank pulley off? If not, use the crank bolt to prevent the flywheel from turning.

v4lu3s

i usually use a long angle iron with 2 holes drilled in it, so i bolt the angle iron to the flywheel with a pair of pressure plate bolts. that way i i have great levereage for breaking the flywheel bolts loose.