Torque specs on 1.6 VTec head.
#4
Honda-Tech Member
Re: Torque specs on 1.6 VTec head. (socaly4life)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">6. Tighten the cylinder head bolts in two steps, working your way from the inside bolts to the outside bolts.
-Step 1: 22 lb ft
-Step 2: 53 lb ft</TD></TR></TABLE>
Taken from BauleyCivic's mini me write up
https://honda-tech.com/zerothread?id=635580
-Step 1: 22 lb ft
-Step 2: 53 lb ft</TD></TR></TABLE>
Taken from BauleyCivic's mini me write up
https://honda-tech.com/zerothread?id=635580
Trending Topics
#8
most hood white kid
Re: Torque specs on 1.6 VTec head. (skunk2finatic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunk2finatic »</TD></TR><TR><TD CLASS="quote">if you don't want it too leak, 23ft lbs , then 65ft lbs
</TD></TR></TABLE>
if you do this and when you break a headbolt, or when you warp the head, you are gonna wish you hadnt listened to this guy
</TD></TR></TABLE>
if you do this and when you break a headbolt, or when you warp the head, you are gonna wish you hadnt listened to this guy
#9
Member
Join Date: Nov 2004
Location: Kitchener, Ontario, Canada
Posts: 1,792
Likes: 0
Received 0 Likes
on
0 Posts
Re: Torque specs on 1.6 VTec head. (egcoupe94)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egcoupe94 »</TD></TR><TR><TD CLASS="quote">tighten them in the sequence in the haynes or helms manual</TD></TR></TABLE>
Indeed, stick to specs, don't overtighten the bolts because it won't leak if you tighten them to spec.
Indeed, stick to specs, don't overtighten the bolts because it won't leak if you tighten them to spec.
#10
most hood white kid
Re: Torque specs on 1.6 VTec head. (CycloneBlue_1.6EL)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CycloneBlue_1.6EL »</TD></TR><TR><TD CLASS="quote">
Indeed, stick to specs, don't overtighten the bolts because it won't leak if you tighten them to spec.</TD></TR></TABLE>
indeed
Indeed, stick to specs, don't overtighten the bolts because it won't leak if you tighten them to spec.</TD></TR></TABLE>
indeed
Thread
Thread Starter
Forum
Replies
Last Post
BrightRedOne
Honda CRX / EF Civic (1988 - 1991)
6
10-24-2004 09:45 AM