ring gear holder
#4
Honda-Tech Member
Re: ring gear holder (92hondalude)
When I put my ring gear on my Quaife I just took an old cut timing belt and nailed it to the leg of my shop table (4x4). Then I wrapped it around the gear about 1.5 -2 times so that when torquing the bolts the belt got tighter. It is ghetto but worked well.
Pirate
Pirate
#6
thats the part # listed in the honda manual. so to your worthless honda dealer.
http://www.slhondaparts.com/se...se%21
07LAB-PV00100 RING GEAR HOLDER $89.64
http://www.slhondaparts.com/se...se%21
07LAB-PV00100 RING GEAR HOLDER $89.64
Trending Topics
#9
Junior Member
Join Date: Oct 2004
Location: Centreville, Va, USA
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Re: ring gear holder (92hondalude)
What are you doing that you need a ring gear holder? Is the crank pulley off? If not, use the crank bolt to prevent the flywheel from turning.
#10
i usually use a long angle iron with 2 holes drilled in it, so i bolt the angle iron to the flywheel with a pair of pressure plate bolts. that way i i have great levereage for breaking the flywheel bolts loose.
Thread
Thread Starter
Forum
Replies
Last Post
police vehicle tech
Honda Accord & Crosstour (2003 - 2012)
21
11-15-2009 08:12 AM