Dogginator

I made this thread to keep continuity of a good topic. The orginal thread was locked due to size, but the link is here:
https://honda-tech.com/zerothread?id=775280

I'll ask Lip to put this link in his last post on the original thread.

Dogginator

The 2000-2003 GSXR 750 throttle bodies measure 50 mm (may be 49.5 mm) at the inlet and 42 mm at the outlet. These are the same dimensions as the GSXR 1000 throttle bodies. I measured my throttle bodies. They are stamped with code 35F0. Check these links for the GSXR 1000:
http://www.mcnews.com.au/NewBi...2.htm
http://www.motorcyclistonline....gsxr/


Modified by Dogginator at 8:26 AM 8/31/2004

edc

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dogginator &raquo;</TD></TR><TR><TD CLASS="quote">The 2000-2004 GSXR 750 throttle bodies measure 50 mm at the inlet and 42 mm at the outlet. These are the same dimensions as the GSXR 1000 throttle bodies. Check these links for the GSXR 1000:
http://www.mcnews.com.au/NewBi...2.htm
http://www.motorcyclistonline....gsxr/</TD></TR></TABLE>

Copied from old thread:

GSXR750 bodies, internal diameter of 48mm at opening taper down to 40mm and 44mm where the injector leads in.

Above were measured for me from a 1999 model with the desginaion WW, apparently the same as WX.

Dogginator

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by edc &raquo;</TD></TR><TR><TD CLASS="quote">GSXR750 bodies, internal diameter of 48mm at opening taper down to 40mm and 44mm where the injector leads in.

Above were measured for me from a 1999 model with the desginaion WW, apparently the same as WX.</TD></TR></TABLE>

Indeed. The 96-99 GSXR 750 throttle bodies are smaller. They are stamped with the code 33E5.

Speedz

i'm still working on my runners.. got everything else pretty much worked out
here's pic of the epoxy i've gotta port smooth..

sCeRaXn

I havent read all of the other post yet...but i have a few questions. First of all...what would be the benefits of having shorter/longer runners with ITB's? It seems like shorter would give you better throttle response...but im not sure if longer ones would have that much if any benefit. Also, how do you figure out what size ITB's youll need? Thanks

Speedz

here's one of the runners thats done, i filled in the injector hole as u can see by this pic.

also got a question for you guys who've alread done the diy itbs.. what would work better: having one vaccuum line coming from runner #1 for brake booster? or just have it plugged into the vaccuum log with the rest of the vaccum lines?




Modified by Speedz at 5:28 AM 9/7/2004

Speedz

finally took the time to finnish these runners inside.. heres pics


next is drilling holes for my vaccuum lines to go to the vaccuum log.

Dogginator

It looks like its coming along. Did you have any problem with the manifold warping when you welded the tubes?

Speedz

thanks man, no my welder was very careful about that.. i'm probably gonna surface the flange tho anyway. (i'm a perfectionist)

Speedz

another update

mEr

looking good

Speedz

thanks
still got more work to do.. gonna try to get the block in my hatch this weekend still got alot of other things to do before i can start the thing tho.
gotta piece together an engine harness first LOL

Dogginator

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Speedz &raquo;</TD></TR><TR><TD CLASS="quote">thanks
still got more work to do.. gonna try to get the block in my hatch this weekend still got alot of other things to do before i can start the thing tho.
gotta piece together an engine harness first LOL
</TD></TR></TABLE>

It looks like it is coming along well. Those velocity stacks are quite nice. Where did you find them? Have you check for brake booster clearance?

Speedz

not yet.. but when i had the ITB's in my engine bay, i think it was ok..

here's the guys email address i got them from (was waiting from email from him befor i posted) FASTLISLE@aol.com
he has them made locally.. he gets them in 3 sizes.. 1-7/8....2-1/8 and the 2-1/2 sizes.. and has a large supply of each size..
the 2.1/8" stacks fit perfect on the gsxr 1000 itbs. (at least they do on mine)

MysteryWagon

where the throttle bodies just laying around or did you purchase them?
and if so how much do a set of GSXR TB's go for?
Are there any charts for throttle body sizes that are appropriate to use with certain set ups?

info would be great
thanks alot
Justin

Speedz

i bought mine off Ebay for $115 shipped.. they normally go for around 150 or so from what i've been seeing.. i guess it depends on if u get lucky or not as to how much you'll end up paying.

Jenvey's website has alot of good info on ITB sizing.. they also give a good idea on how a system should be designed.
here's a link to their Advice & FAQs http://www.jenvey.com/~Tech_QA.htm
also i suggest reading the VERY long archived thread that's posted at top of this thread. lots of good info there as well.

and here's a small update on fitting my stacks this afternoon.. i think they came out well.



Modified by Speedz at 1:08 AM 9/18/2004

EKhatch

Very, very nice work Speedz.

Speedz

thanks man, gonna try to have the hatch running in 2 weeks for our Oct2 race.. u should come on over from ID

OLM-02R

that looks awesome man...keep us updated...

GreensleeperB16

Nice VTECH phone in backround!

dmotoguy

what do most people use to tune on a basically stock d16z6.. vafc?

can someone do a rundown of the parts needed?
gsxr work best for d-series?

CRX_VTEC

for d series any gsxr would be good. 600 750 1000.. they'll all work. Hyabusa for B-series. Also.. for K series too. (1 set made)

Speedz

couple pics showing brake booster space vs my itb stacks

JUNcr-x

lookin great..good work