how to start without key
#1
Junior Member
Thread Starter
Join Date: Mar 2003
Location: Raleigh, nc, usa
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
how to start without key
when i got to my work, key got stuck on the ingition switch and won't come out. i finially took it out with a plier. now key goes in but won't turn. i think i gotta replace the ignition cylinder. how can i start the car without using the key? i gotta move the car to my garage to work on it. and how can i cut it off once i drive back home? thanks
#3
Re: how to start without key (bearboy80)
I would feel bad posting the answer since thieves are always lurking and there seems to be so many posts as of late with cars driving away. It is possible, and yes, the wheel would lock without the key unless you defeat that mechanism.
Just pull out your trusty Helms or whatever manual that has the wiring schematics in it. You'll see how easy it is just by going through those diagrams.
Hope you can find a used cylinder and key for a good price.
Just pull out your trusty Helms or whatever manual that has the wiring schematics in it. You'll see how easy it is just by going through those diagrams.
Hope you can find a used cylinder and key for a good price.
#4
Blue Sedan Crew
Re: how to start without key (steve_s)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by steve_s »</TD></TR><TR><TD CLASS="quote">you can hot wire it but i dont know how to. But even if you did hotwire it, wouldent the wheel lock up?</TD></TR></TABLE>
yeah it does, once hot wired, which you have to break ignition, you must break the steering column to move the wheel, we have gotten a lot of junkyard parts cars, so i know, your best bet is to tow it to the garage
yeah it does, once hot wired, which you have to break ignition, you must break the steering column to move the wheel, we have gotten a lot of junkyard parts cars, so i know, your best bet is to tow it to the garage
#7
Join Date: May 2003
Location: Ottawa, Ontario, Canada
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
Re: (m3dia_lab)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by m3dia_lab »</TD></TR><TR><TD CLASS="quote">. he just used my car key to turn a little piece. just dont know which one.</TD></TR></TABLE>
if you look for more then 2 seconds you'll find the answer
if you look for more then 2 seconds you'll find the answer
Trending Topics
#9
Re: (Kendall)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kendall »</TD></TR><TR><TD CLASS="quote">I sent an IM detailing the instructions on how to start and move it without a key.</TD></TR></TABLE>
for not educating the wrong people.
for not educating the wrong people.
#11
Junior Member
Thread Starter
Join Date: Mar 2003
Location: Raleigh, nc, usa
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Re: (revvv_pshhh)
thanks guys. i got answer. but if i replace, i gotta carry 2 set of keys, one for door, and the other for ignition. if i go to dealer, will they have ignition for my car? or do i have to change the door lock also?
#12
Honda-Tech Member
Join Date: Jul 2003
Location: San Diego, CA, USA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: (bearboy80)
you can get an entire lock set from the dealer but it will be expensive.....if you do go just get the ignition switch......junk yards will have them for decent prices
#14
11:11
Re: (AJax AirLines)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AJax AirLines »</TD></TR><TR><TD CLASS="quote">just buy a ignition cylinder</TD></TR></TABLE>
Yeah. That's why I asked what kind of car this is happening to, because I have one for sale out of a 2000 EX. It should work on other year civics.
Yeah. That's why I asked what kind of car this is happening to, because I have one for sale out of a 2000 EX. It should work on other year civics.
#15
Re: (smithenhiven)
Did it break off above where the tooling is on the key? (tooling is the notches cut into the key)I'm thinking it did since you were able to get it out with a pair of plyers. Take the two pieces to an Ace Hardware and have them cut you a new key. I used to do it for people all the time when I managed a Ace.
#16
Re: (Kendall)
i would like to know aswell my moms crv cylinder doesnt work its gay cuz its in my garage its not in the way or anything but its a two car garage i wouldlike to move it to the shop classicauto to get fixed could u send me a how to
#17
Join Date: Jan 2003
Location: White Plains, NY, United States
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jdm_loser)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_loser »</TD></TR><TR><TD CLASS="quote">i would like to know aswell my moms crv cylinder doesnt work its gay cuz its in my garage </TD></TR></TABLE>
Did you just say that your moms cylinder is gay because its in your garage??
Did you just say that your moms cylinder is gay because its in your garage??
#21
11:11
Re: (jdm_loser)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_loser »</TD></TR><TR><TD CLASS="quote">stfu no0b </TD></TR></TABLE>
lol, who you callin noob?
He's been here ALOT longer than you.
lol, who you callin noob?
He's been here ALOT longer than you.
#23
11:11
Re: (jdm_loser)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_loser »</TD></TR><TR><TD CLASS="quote">i call everyone no0bs cause im cool
n ur not. i did have a name on here that was well over 1000 post but i got banned.</TD></TR></TABLE>
You mean I'm not cool like you? O well.
You got banned under a different name did you, looks like your working on that again with a 96% and no avatar permission level.
n ur not. i did have a name on here that was well over 1000 post but i got banned.</TD></TR></TABLE>
You mean I'm not cool like you? O well.
You got banned under a different name did you, looks like your working on that again with a 96% and no avatar permission level.
#25
Honda-Tech Member
Join Date: Jan 2004
Location: Vancouver, B.C., Canada
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jdm_loser)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_loser »</TD></TR><TR><TD CLASS="quote">i call everyone no0bs cause im cool
n ur not. i did have a name on here that was well over 1000 post but i got banned.</TD></TR></TABLE>
laughs and points @ jdm_loser
n ur not. i did have a name on here that was well over 1000 post but i got banned.</TD></TR></TABLE>
laughs and points @ jdm_loser