how to install amp and sub to honda accord 2000 se
#2
Honda-Tech Member
Re: how to install amp and sub to honda accord 2000 se (khoi1972)
hey....is your name Khoi???? LOL , I rarely ever find anybody else with my same name..LOL..sorry for the off topic post..
Khoi
Khoi
#4
Re: how to install amp and sub to honda accord 2000 se (khoi1972)
Yep you will need an aftermarket HeadUnit. The Honda stock isnt that powerful anyway to even it if did have correct RCA outputs it wouldnt sound as good as a $100 aftermarket headunit. May I recommend this particiular player: JVC KDF401
http://www.dealtime.co.uk/xPC-..._Unit
$100 US for mp3 playback. Awesome deck (i own one )
http://www.dealtime.co.uk/xPC-..._Unit
$100 US for mp3 playback. Awesome deck (i own one )
#6
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: how to install amp and sub to honda accord 2000 se (khoi1972)
You will need a line level adpt., it will step down the speaker output to a RCA level, or get an amp that has speaker level inputs, there a lot of them.
hope this helps. 94
hope this helps. 94
Trending Topics
#8
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: how to install amp and sub to honda accord 2000 se (khoi1972)
To start off, you need a Hi-lo converter. This uses speaker connections to provide you with a pair of RCA connections. You can ****** one at your local Best Buy car audio department. The cost is 22.99.You can remove the factory stereo and use the speaker leads off of the main harness.
Then, Run your RCA cables along with your remote wire. the remote wire should be provided with the wire kit you puchase. If not, you need a wire that is about 18-16 GA thick, and can run from the radio of your vehicle to the amp (where ever u place it.) Connect that to either the ignition wire or power antennna connection of the car.
The rest is simple. Run the power wire with the fuse into the car, of course making sure the side with the fuse is closest to the battery. You should find a spot to run it on the passenger side floorboard or through the wiring harness that runs from your engine and into the car.
Ground the "Ground" wire to a bare metal surface closest to the amp. You choose your spot
mount amp.....
Then, Run your RCA cables along with your remote wire. the remote wire should be provided with the wire kit you puchase. If not, you need a wire that is about 18-16 GA thick, and can run from the radio of your vehicle to the amp (where ever u place it.) Connect that to either the ignition wire or power antennna connection of the car.
The rest is simple. Run the power wire with the fuse into the car, of course making sure the side with the fuse is closest to the battery. You should find a spot to run it on the passenger side floorboard or through the wiring harness that runs from your engine and into the car.
Ground the "Ground" wire to a bare metal surface closest to the amp. You choose your spot
mount amp.....
Thread
Thread Starter
Forum
Replies
Last Post
ttvegas2002
Honda Accord (1990 - 2002)
1
08-28-2005 05:57 AM
Dark_Knight
Honda Accord (1990 - 2002)
4
03-07-2004 09:45 PM