Experience with RSR ExMag GTII catback?
06-22-2004, 10:07 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2001
Location: USA
Posts: 18,261
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone tried this or use this? ExMag GTII series (race lineup)
GTII features:
- straightest possible pipe routing (most applications)
- larger mandrel bent piping for ultra high flow
- full polished 304 stainless steel GT2 straight through muffler
- unique race car slip-fit (flangeless) design (most applications)
- ceramic coated 409 stainless steel piping for long life
- dyno proven gains in horsepower and torque
- engineered in Japan
If so what were your thoughts on it?
- straightest possible pipe routing (most applications)
- larger mandrel bent piping for ultra high flow
- full polished 304 stainless steel GT2 straight through muffler
- unique race car slip-fit (flangeless) design (most applications)
- ceramic coated 409 stainless steel piping for long life
- dyno proven gains in horsepower and torque
- engineered in Japan
If so what were your thoughts on it?
06-22-2004, 10:52 PM
#4
Join Date: Aug 2002
Location: Norway
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (Bbasso)
06-22-2004, 11:58 PM
#5
Join Date: May 2004
Location: San Diego, Ca
Posts: 1,173
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (Daysleeper)
i have had it for 5 months and i love it....sounds awesome with or without the silencer.....It is loud but tollerable w/out the silencer...pretty light to great power gains...and suprisingly it has never scraped...
here are some pics
here are some pics
06-23-2004, 12:01 AM
#6
Join Date: Jan 2004
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (Bbasso)
EXCELLENT..member nicedc2r has one...power increase was definately noticeable i should say...he had a flatspot on the powerband...then the axhaust opened it right up. 
from me
from me
Trending Topics
06-23-2004, 03:54 AM
#9
Honda-Tech Member
Join Date: Jul 2002
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (SuperTwinz)
That exhaust is pretty damn loud! My cousin had it on his 98 JDM R when it was imported from Japan. He sold after a few months........ too loud!
06-23-2004, 08:36 AM
#10
Honda-Tech Member
Join Date: Jan 2002
Location: NY, USA
Posts: 11,669
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (Euro98ITR)
Check this out...another user posted vids of this setup on his EG hatch. It's pretty damn loud.
https://honda-tech.com/zerothread?id=782101
https://honda-tech.com/zerothread?id=782101
06-23-2004, 08:45 AM
#12
Junior Member
Join Date: Oct 2003
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (Euro98ITR)
Hi there..
I had that exhaust on my car.. Belive me,it's so damn loud that it'll **** you off!!!!
About power gains... With the filter,i almost compare it with stock..but witouth the filter it gains pretty much power.
I won't recommend it dude..
Good loking..(atleast)
I had that exhaust on my car.. Belive me,it's so damn loud that it'll **** you off!!!!
About power gains... With the filter,i almost compare it with stock..but witouth the filter it gains pretty much power.
I won't recommend it dude..
Good loking..(atleast)
06-23-2004, 08:51 AM
#16
Member
Join Date: Apr 2002
Posts: 1,868
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (NiceDc2r)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NiceDc2r »</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
looks good.
</TD></TR></TABLE>looks good.
06-23-2004, 10:16 AM
#18
Honda-Tech Member
Join Date: Mar 2001
Location: Feeling FOBulous
Posts: 6,083
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (Bbasso)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso »</TD></TR><TR><TD CLASS="quote">
- engineered in Japan
</TD></TR></TABLE>
And made in Taiwan?
- engineered in Japan
</TD></TR></TABLE>
And made in Taiwan?
06-23-2004, 10:34 AM
#19
Honda-Tech Member
Re: Has anyone tried this or use this? ExMag GTII series (EKology)
Correct, with slip fittings, no resonator, and possible clearance issues, AFIK the sidewall thickness was thinner, definitely not SS, but forgot specifics.
The cannister is the same as mine Rob, but the sound and tone will be louder and higher pitched. Mine is loud enough that it requires me using the intercom to communicate at the track. That one looks like you'd get a headache and require ear plugs.
If I remember correctly, D might have had this setup at one time...
The cannister is the same as mine Rob, but the sound and tone will be louder and higher pitched. Mine is loud enough that it requires me using the intercom to communicate at the track. That one looks like you'd get a headache and require ear plugs.
If I remember correctly, D might have had this setup at one time...
06-23-2004, 11:00 AM
#20
Join Date: May 2004
Location: San Diego, Ca
Posts: 1,173
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (1GreyTeg)
it isn't that loud, not as loud as an apex n1.. there is no clearance issues you can see how low my car is and i have no problems with it....the quality is Good don't know why someone would say it wasn't(comparison).....the tone without the silencer is deep but with the silencer i is higher pitched...as long as you use a cat there wont be any raspiness(new word) and leave the silencer in, in normal driving is only a tad bit louder than stock...i noticed gains all the way up from 4000rpm and huge gains in vtec...just remember why you are buying the exhaust...is it for sound or do you want power
06-23-2004, 11:23 AM
#22
Honda-Tech Member
Re: Has anyone tried this or use this? ExMag GTII series (NiceDc2r)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NiceDc2r »</TD></TR><TR><TD CLASS="quote">i will try to get some sound up for you guys</TD></TR></TABLE>
Sound clips on the net while might be intriguing to some do Not promote the true sound or level as such.
Loud is a relative term.
What one guy might say is loud is quiet to another. Which is exactly what we are running into here.
I figure if I can't clearly communicate with my passenger at WOT while screaming, then the fuggin exhaust is Loud. I don't know how you gauge your "loudness", but 93-95 Db is pretty irritating to me after about a constant half an hour.
And last time I checked, he was running a test pipe so sound will be different and yes, Louder.
Anton - who is gonna take the slug out for a spin this afternoon and Not be able to enjoy any other music other than the noises the car makes itself.
Sound clips on the net while might be intriguing to some do Not promote the true sound or level as such.
Loud is a relative term.
What one guy might say is loud is quiet to another. Which is exactly what we are running into here.
I figure if I can't clearly communicate with my passenger at WOT while screaming, then the fuggin exhaust is Loud. I don't know how you gauge your "loudness", but 93-95 Db is pretty irritating to me after about a constant half an hour.
And last time I checked, he was running a test pipe so sound will be different and yes, Louder.
Anton - who is gonna take the slug out for a spin this afternoon and Not be able to enjoy any other music other than the noises the car makes itself.
06-23-2004, 12:15 PM
#25
Member
Join Date: Apr 2002
Location: La Primera Guete, United States
Posts: 5,132
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone tried this or use this? ExMag GTII series (1GreyTeg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1GreyTeg »</TD></TR><TR><TD CLASS="quote">
Sound clips on the net while might be intriguing to some do Not promote the true sound or level as such.
Loud is a relative term.
What one guy might say is loud is quiet to another. Which is exactly what we are running into here.
</TD></TR></TABLE>
Very true, Anton. I had spoken with a few d00ds on here about the Buddy Club Spec III and based on what I had gathered I expected it to sound like a constant sonic boom. At first it did, but now that I heard the Spec III on a buddies STI, the Civic and ITR sound more like the farting of a gay uncle (Not quite, but its close
) Some people just have been subjected to different exhausts and thus judge levels of loudness differently. I personally think that a straight piped Spoon N1 is streetable. 
Sound clips on the net while might be intriguing to some do Not promote the true sound or level as such.
Loud is a relative term.
What one guy might say is loud is quiet to another. Which is exactly what we are running into here.
</TD></TR></TABLE>
Very true, Anton. I had spoken with a few d00ds on here about the Buddy Club Spec III and based on what I had gathered I expected it to sound like a constant sonic boom. At first it did, but now that I heard the Spec III on a buddies STI, the Civic and ITR sound more like the farting of a gay uncle (Not quite, but its close
) Some people just have been subjected to different exhausts and thus judge levels of loudness differently. I personally think that a straight piped Spoon N1 is streetable.
