Notices
Search: Posts Made By: autospeed060
Showing results 1 to 10 of 10
Search took 0.11 seconds.
09-16-2012, 07:51 AM
Replies: 5
Views: 4,987
Posted By autospeed060

Re: Is 1/2 inch of throw on slave cylinder enough? my clutch is dragging

yeah travel should be around 3/4", look under the dash at the clutch master cylinder look at its rubber boot area check that for leaks if it looks dry... make sure you have the clutch bled good, the...
09-16-2012, 07:45 AM
Replies: 6
Views: 7,306
Posted By autospeed060

Re: brake issue

and when the pedal get hard... is the engine shutting off? if the engine shuts off the pedal will become hard to push because there is no vacuum to the power brake booster.
09-16-2012, 07:44 AM
Replies: 6
Views: 7,306
Posted By autospeed060

Re: brake issue

a bad brake booster can cause the brake pedal to become hard to push. to quick test it do this.......with the car off pump the brake pedal 3 or 4 times until its good and stiff then hold your foot on...
09-16-2012, 07:40 AM
Replies: 6
Views: 7,306
Posted By autospeed060

Re: brake issue

1-Make sure you have the pins greased up really good so they slide smoothly
2-Make sure you Don't over fill the brake fluid. overfilling will cause the brakes to self apply and can cause the rotor...
09-16-2012, 07:32 AM
Replies: 7
Views: 1,769
Posted By autospeed060

Re: How do you pull codes?

on a side not anyone have any experience with the OTC Genisys scan tool? or have and suggustions as to what is the best scan tool for the money if i have like $2000
09-16-2012, 07:31 AM
Replies: 7
Views: 1,769
Posted By autospeed060

Re: How do you pull codes?

on a honda that new can you still blink the codes with the CEL or do you NEED a Scan Tool?
09-16-2012, 07:29 AM
Replies: 18
Views: 5,610
Posted By autospeed060

Re: new member

Honda's are the best!
09-16-2012, 07:28 AM
Replies: 15
Views: 4,634
Posted By autospeed060

Forum: Acura Integra
09-14-2012, 07:14 PM
Replies: 5
Views: 1,532
Posted By autospeed060

Re: p30 ecu makes car bog no cel light??

correct me if i'm wrong but if you jump the plug (short the service connector) and the CEL stays solid that means code 0, which is problem with ecu
Forum: Acura Integra
09-14-2012, 06:40 PM
Replies: 5
Views: 1,532
Posted By autospeed060

Re: p30 ecu makes car bog no cel light??

what happens when you check for codes? does the check engine light flash the codes out or does it just stay solid?
Showing results 1 to 10 of 10


 
Forum Jump


All times are GMT -8. The time now is 01:49 AM.