Notices
 
Search: Posts Made By: exb18c1
Showing results 1 to 25 of 286
Search took 0.33 seconds.
01-24-2012, 04:07 PM
Replies: 11
Views: 3,525
Posted By exb18c1

Re: 2000 accord shuts off randomly video up

You have a hell of a misfire man! The check engine is blinking when the RPM went to about 3000.Put the scanner on it and try to read codes.Also , I would check for the spark and injection pulse.To me...
01-21-2012, 06:34 PM
Replies: 30
Views: 92,640
Posted By exb18c1

01-17-2012, 03:39 PM
Replies: 30
Views: 92,640
Posted By exb18c1

Re: 2001 Honda Civic EX, broken timing belt

What's the milage on the car?The way you describe ,sounds like a dead battery.Start by that.You can crank the engine over and have someone look in side the oil fill hole.You should see the rockers...
Forum: Honda Prelude
01-10-2012, 04:09 PM
Replies: 71
Views: 5,908
Posted By exb18c1

Re: what is going on?! no start and no codes

Relax man!If all the people would just throw the parts randomly just because someone else had similar problem,they would spend lots of money for nothing.Me personally,would be happy if someone get to...
Forum: Honda Prelude
01-10-2012, 04:02 PM
Replies: 71
Views: 5,908
Posted By exb18c1

Re: what is going on?! no start and no codes

You can confirm the pump failure by : having the fuel pressure gauge t-connected(or there is one that screws directly on the fuel filter) on the market.At the time of no start ,take a look at the...
01-10-2012, 03:38 PM
Replies: 5
Views: 4,240
Posted By exb18c1

Re: Honda CR-V 2005 Internal FAN not working

Lol,so you were talking about blower motor????:):):):):):):)
01-07-2012, 03:25 PM
Replies: 10
Views: 10,745
Posted By exb18c1

Re: 2005 Accord rear wheel problem

When you jack the car by the frame you are loading the suspension.If there is a loose anywhere you won't catch it.Science you have a wear on a tire you have either something loose (and it's causing a...
01-07-2012, 03:11 PM
Replies: 5
Views: 9,730
Posted By exb18c1

Re: Power Steering Pump

You suppose to turn steering wheel while the car is running,do it for at least 2 min., and do it slowly lock to lock until there is no more air surfacing in the reservoir.What was the reason you have...
01-07-2012, 11:57 AM
Replies: 11
Views: 16,358
Posted By exb18c1

Re: 2001 Civic sounds like a Helicoptor during acceleration

The best way to check for clogged catalitic is to check engine's vacuum with gauge.
01-06-2012, 04:37 PM
Replies: 4
Views: 5,490
Posted By exb18c1

Re: CRV maintenance

Transmission oil,brake fluid,power steering fluid diffy fluid.You can also clean the injectors and clean throttle body.It's all maintenance but the intervals will depend on where are you located.Here...
01-06-2012, 04:32 PM
Replies: 5
Views: 4,240
Posted By exb18c1

Re: Honda CR-V 2005 Internal FAN not working

Probably the system ran out of R-134a.You will have to put the pressure gauges on it.
01-06-2012, 04:28 PM
01-06-2012, 04:20 PM
Replies: 12
Views: 8,677
Posted By exb18c1

Re: 97 accord SE P0171 code

Hoe about a tune up on your car?Cap ,rotor ,spark plugs,wires?Now for insufisient flow.There should be a solenoid for EGR vacuum supply.If the solenoid is start to seize up inside even when commanded...
01-05-2012, 07:40 PM
Replies: 15
Views: 1,484
Posted By exb18c1

Re: 97 accord with a cracked transmisson case... Please help.

If you don't know what was in it you probably never changed the
fluid.I would put DEXTRON#3 just to see if it worked if yes ,the drain and fill "flush still" leaves about 2 liters inside.
01-05-2012, 07:29 PM
Replies: 10
Views: 10,108
Posted By exb18c1

Re: F23 crank oil inlet: o-ring or no o-ring

You will need an impact screw driver to get them out(at least to get them out without stripping them).you will have to secure the pump in the soft jaw vise.
01-05-2012, 06:43 PM
Replies: 12
Views: 8,677
Posted By exb18c1

Re: 97 accord SE P0171 code

After clearing all codes ,the ECM has to run the monitors to trigger the codes (if malfunction is present) but if conditions have never been met the monitors wouldn't run so it will never detect the...
01-05-2012, 06:31 PM
Replies: 10
Views: 10,108
Posted By exb18c1

01-05-2012, 04:01 PM
Replies: 15
Views: 1,484
Posted By exb18c1

Re: 97 accord with a cracked transmisson case... Please help.

It's not even to drain the fluid,It's to drain the fluid and run some cleaner(brake cleaner or throttle body cleaner)through the crack before you can seal it,unfortunately.Speaking from...
01-05-2012, 03:56 PM
Replies: 4
Views: 6,890
Posted By exb18c1

Re: Compression Test help 96 lx accord

My ? to you is - compression test is not really a tune up,it's a way of troubleshooting a seal between cylinder and the piston rings or head and valves or the head gasket (usually accompanied with...
01-05-2012, 03:42 PM
Replies: 15
Views: 1,484
Posted By exb18c1

Re: 97 accord with a cracked transmisson case... Please help.

J.B. weld it is your last resort anyways but unless the crack is bone dry it would't work.Try it anyways,you have got nothing to loose,just keep an eye on the fluid level.
01-05-2012, 03:39 PM
Replies: 10
Views: 10,108
Posted By exb18c1

Re: F23 crank oil inlet: o-ring or no o-ring

I never took oil pump of a F23 but my common sense says if there is a groove it the mating surface -it's for a reason (gasket seat).In my practice,I have never seen a groove in part that didn't...
01-03-2012, 07:46 PM
Replies: 13
Views: 6,723
Posted By exb18c1

Re: I know this is long, but some other issues have occurred

Forget about the maintenance light,It's never been reset.What the hell is a catalitic converter tune up???
01-03-2012, 07:20 PM
Replies: 3
Views: 983
Posted By exb18c1

Re: 1992 Honda Accord

You hold it,he holds it in,you keep holding it ,he keeps the pedal down (it will be there anyways)you keep holding it and at the same time open the bleeder screw.the air comes out,you close it,he can...
01-03-2012, 03:29 PM
Replies: 3
Views: 983
Posted By exb18c1

Re: 1992 Honda Accord

You will need to take the freeplay of the fork.Make someone press the pedal to the floor but before that push the fork with one hand against the slave cylinder piston's rod you will have to resist...
Showing results 1 to 25 of 286
 


 
Forum Jump


All times are GMT -8. The time now is 03:00 PM.