Honda-Tech - Honda Forum Discussion

Notices
Search: Posts Made By: TexasRedCD5
Showing results 1 to 23 of 23
Search took 0.32 seconds.
Forum: Honda Accord (1990 - 2002)
08-04-2011, 03:06 PM
Replies: 7
Views: 2,441
Posted By TexasRedCD5

Re: 1996 Accord EX Loss of HP.

Im using the upgraded valve springs. As i said, i havent had a problem yet, and its not something mechanical. Some sensor is reading off and cutting fuel trims. I had to run the bigger injectors...
Forum: Honda Accord (1990 - 2002)
08-04-2011, 12:41 PM
Replies: 5
Views: 10,661
Posted By TexasRedCD5

Re: Coilover sleeves

Bump! I wanna hear the answer to this also.
Forum: Honda Accord (1990 - 2002)
08-04-2011, 12:22 PM
Replies: 7
Views: 2,441
Posted By TexasRedCD5

Re: 1996 Accord EX Loss of HP.

The clutch grabs plenty hard. Hard enough to pull 2.1 sec 60 foots at the track. Clutch is strong, the engine SOUNDS sick and performs like its sick also.

Didnt think I would NEED a tune at this...
Forum: Honda Accord (1990 - 2002)
08-04-2011, 12:19 PM
Replies: 7
Views: 2,441
Posted By TexasRedCD5

Re: 1996 Accord EX Loss of HP.

I do know exactly how VTEC works, just not sure of the engagement protocols on this particular engine, which i said in my post. I was going by what i was hearing when driving my car before the...
Forum: Honda Accord (1990 - 2002)
08-03-2011, 03:34 PM
Replies: 14
Views: 10,563
Posted By TexasRedCD5

Re: Temperature gauge issue...

mines like that all the time.
Forum: Honda Accord (1990 - 2002)
08-03-2011, 03:14 PM
Replies: 7
Views: 2,441
Posted By TexasRedCD5

1996 Accord EX Loss of HP.

So i have a 96 accord EX with the F22b1 5MT. The car has some basic Boltons Listed under my signature. These mods have been on the car for some time now so I do not believe these contribute to my...
Forum: Honda Accord (1990 - 2002)
08-03-2011, 02:09 PM
Replies: 14
Views: 10,563
Posted By TexasRedCD5

Re: Temperature gauge issue...

My temp gauge does the same thing, didnt start doing this until i had blown the top of my stock radiator about a 2 years ago and replaced it with an aftermarket aluminum one. Wondering if maybe the...
Forum: Honda / Acura
03-25-2011, 11:35 PM
Replies: 1,548
Views: 439,933
Posted By TexasRedCD5

Re: The Perfect Shift Knob

im on my stock 5th gen and trying to find a nice one that i can replace it with. i just dont want the joint between the knob and the boot to look ghetto... its got that rounded square plastic snap.
Forum: Honda Accord (1990 - 2002)
03-22-2011, 05:19 PM
Replies: 25
Views: 73,901
Posted By TexasRedCD5

Re: EGR block (disable system how to)

thanks for the info, although im still confused on whether this is a safe mod or not... Im sick of the problems created by this system and wanted to just do a full delete however lack of funds are...
Forum: Honda Accord (1990 - 2002)
03-19-2011, 12:16 AM
Replies: 1
Views: 2,665
Posted By TexasRedCD5

Re: Need valve lash specs!

intake is at .26mm (.012 in.) and exhaust at .30mm (.012 in.) honda valve trains are kind of noisy so valve noise is never going to completely go away.
Forum: Honda Accord (1990 - 2002)
03-19-2011, 12:02 AM
Replies: 28
Views: 18,050
Posted By TexasRedCD5

Re: 90 Accord Intermittent Misfire

My accord had a miss from 2500-3000 rpm when maintaining speed, reguardless of engine temp. 3 out my 4 EGR ports were clogged and after they were cleaned, never happened again. Because it is...
Forum: Honda Accord (1990 - 2002)
03-17-2011, 11:14 AM
Replies: 4
Views: 11,454
Posted By TexasRedCD5

Re: 98 Accord Misfire Problems

okay, there is a few things i would check before actually replacing any parts. Check the EGR manifold. if port 1 and 2 are clogged, they will overload 3 and 4 causing those to misfire. Is this a...
Forum: Honda Accord (1990 - 2002)
03-14-2011, 09:44 PM
Replies: 28
Views: 18,050
Posted By TexasRedCD5

Re: 90 Accord Intermittent Misfire

i forget if honda runs an oring or a felt/metallic head gasket. You could be having an EGR problem. Your coolant intake line runs through the EGR before it enters the engine. Maybe the coolant...
Forum: Honda Accord (1990 - 2002)
03-14-2011, 06:24 PM
Replies: 3
Views: 674
Posted By TexasRedCD5

Re: 99 front brake and e-brake question

yes there are only two bolts holding the front calipers on.

+1 on the ebrake question also
Forum: Honda Accord (1990 - 2002)
03-10-2011, 11:25 PM
Replies: 3
Views: 1,761
Posted By TexasRedCD5

Re: f22b1 swaped into a 93 lx accord

are all of the vacuum lines on the back of the manifold and above the fuel rail routed correctly? There is also two that go into a plate on the right side (when facing the engine from the front). If...
Forum: Honda Accord (1990 - 2002)
03-02-2011, 10:18 AM
Replies: 50
Views: 36,671
Posted By TexasRedCD5

Re: where is all my gas goin in my accord????

I know how to fuel map and ignition map myself. I did a full tune on my 05 Z1000 with a PC3 system. Just wondered which was the better platform for someone like me whos used to a PNP system. Hondata...
Forum: Honda Accord (1990 - 2002)
03-01-2011, 09:41 PM
Replies: 50
Views: 36,671
Posted By TexasRedCD5

Re: where is all my gas goin in my accord????

Working a P28 w/ VTEC chipped ECU right now. Which tune platform would you suggest. I can do Neptune, Crome, ECtune.

Sorry, mostly a carburated/big block v8 guy.
Forum: Honda Accord (1990 - 2002)
03-01-2011, 11:09 AM
Replies: 50
Views: 36,671
Posted By TexasRedCD5

Re: where is all my gas goin in my accord????

Im having a similar problem. I also noticed that my accord is also emmitting some black smoke (unburnt fuel) when im under power. My car has I/H/E with a bisimoto level 2 cam and valve train. The car...
Forum: Honda Accord (1990 - 2002)
02-28-2011, 09:00 PM
Replies: 7
Views: 1,960
Posted By TexasRedCD5

Re: F22B1 - The Beginning questions...

I kept all my interior, ABS, PS, AC, and everything and my CD5 is pretty monsterous for being NA. I'm very against removing interior panels and seats. What do you save? 200 lbs at most? Not worth the...
Forum: Honda Accord (1990 - 2002)
02-21-2011, 10:43 AM
Replies: 8
Views: 21,542
Posted By TexasRedCD5

Re: 1998 Accord P0170/P0172 - Need hpelp troubleshooting

when i had these codes, I had 3 out of 4 EGR manifold ports clogged. Im still chasing a P0171 code around at this point.
Forum: Honda Accord (1990 - 2002)
02-20-2011, 11:18 PM
Replies: 10
Views: 3,307
Posted By TexasRedCD5

Re: Advice Needed - Do I need an adjustable fuel pressure regulator

+1 to a reason. I am having this issue also
Forum: Honda Accord (1990 - 2002)
02-16-2011, 05:58 PM
Replies: 3
Views: 1,367
Posted By TexasRedCD5

Re: 97 CD5 - Rust Vs Exhaust question.

yea im running a magnaflow wide-open with T304 piping all the way back. The only thing not T304 is the cat...
Forum: Honda Accord (1990 - 2002)
02-12-2011, 12:21 PM
Replies: 34
Views: 44,712
Posted By TexasRedCD5

Re: 1995 Honda Accord Ex - F22b1 - Idle Problems

I just had the same problem answered for me. Intake manifold gasket was the solution to my problem. Easiest way to check this is to take some aerosol Starter Fluid and while the engine is running,...
Showing results 1 to 23 of 23


 
Forum Jump


All times are GMT -8. The time now is 08:11 PM.