Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 17
1
2
3
11
Last »
Search: Posts Made By: dglassmyer
Showing results 1 to 25 of 419
Search took 0.55 seconds.
Forum: Honda Accord (1990 - 2002)
12-09-2012, 06:20 AM
Replies: 4
Views: 936
Posted By dglassmyer

Re: Thinking about getting an obd2 lsd transmission, but how to set ignition timing ?

I'd say you've got the right idea with the pulley.
take the crank pulley off and take the time to replace anything leaking around the main, then shoot it with a nice base coat of black paint. ...
Forum: Honda Accord (1990 - 2002)
11-29-2012, 02:14 AM
Replies: 1
Views: 958
Posted By dglassmyer

Re: Auto to manual swap on a f22a6

This topic has been beaten to death, search before posting.
Forum: Honda Accord (1990 - 2002)
11-26-2012, 03:07 AM
Replies: 4
Views: 1,027
Posted By dglassmyer

Re: can I use my F22B1 ingectors on H22A

Whether the injectors are peak and hold, or saturated, is not the main issue.
The accord injectors are 190cc while the h22's flow at 240cc.
You will run lean, so don't use them.
Forum: Honda Accord (1990 - 2002)
11-18-2012, 09:55 AM
Replies: 18
Views: 1,730
Posted By dglassmyer

Re: best value in stock replacement shocks?

You could handle the job yourself no problem.
Autozone, Oreillys or Kragen, depending on where you live, all rent external spring compressors.3
...
Forum: Honda Accord (1990 - 2002)
11-18-2012, 09:53 AM
Replies: 13
Views: 4,405
Posted By dglassmyer

Re: Going from f22b2 to f22a6

Just curious but what is the purpose of this swap?
The A6 does have some very mild benefit over the B2, if your end goal is power, there are much better options to choose from.
Forum: Honda Accord (1990 - 2002)
11-18-2012, 09:50 AM
Replies: 3
Views: 799
Posted By dglassmyer

Re: Newish beginning.

I hail from Texas so I have no input on snow tires, but welcome.
Looks like you have a clean car to work with :)
Forum: Honda Accord (1990 - 2002)
11-16-2012, 04:35 AM
Replies: 28
Views: 64,337
Posted By dglassmyer

Re: Tips for Replacing Rear Motor Mount?

You have to take the front bracket off before moving the engine, the front mount stabilizes the engine from torsional forces so at rest there is no load on it.
You're good on the other steps.
Forum: Honda Accord (1990 - 2002)
11-16-2012, 04:29 AM
Replies: 21
Views: 23,421
Posted By dglassmyer

Re: H22 / F22 Throttle Body Install

Np, I hope it benefits your setup.



In your case I would recommend driving your car off a cliff, should make for quite a noisy event.
Forum: Honda Accord (1990 - 2002)
11-13-2012, 04:23 PM
Replies: 9
Views: 1,672
Posted By dglassmyer

Re: Read this.

My favorite is when the guy making the post doesn't think he gets an answer fast enough... and then makes another post with a different title asking for help with the same issue. :hammer:
Forum: Honda Accord (1990 - 2002)
11-12-2012, 03:33 PM
Replies: 25
Views: 3,476
Posted By dglassmyer

Re: light vs. oem flywheel

Be aware of fakes...

http://www.exedyusa.com/multimedia/specsheets/Beware%20of%20Imitations1fw.pdf
Forum: Honda Accord (1990 - 2002)
11-12-2012, 03:28 PM
Replies: 107
Views: 8,566
Posted By dglassmyer

Re: Fseries stockish build beginning - input appreciated!

The H TB will fit the F22 upper manifold plenum bolt for bolt.
Enlarging the throat of the F22 manifold to match is also simple work with a dremel, grinder, or whatever
.
I pulled mine together...
Forum: Honda Accord (1990 - 2002)
11-11-2012, 09:18 PM
Replies: 18
Views: 1,730
Posted By dglassmyer

Re: best value in stock replacement shocks?

I had kyb GR2's on my car for years, I never had any complaints, good oem replacement.
Forum: Honda Accord (1990 - 2002)
11-11-2012, 09:03 PM
Replies: 2
Views: 690
Posted By dglassmyer

Re: turbo! help

It really depends.

The intercooler sounds like an Ebay special and are fairly cheap to begin with.
The deal you got on the turbo is dependant on its condition.
Did you measure and check shaft...
Forum: Honda Accord (1990 - 2002)
11-11-2012, 09:02 AM
Replies: 21
Views: 23,421
Posted By dglassmyer

Re: H22 / F22 Throttle Body Install

Sorry for the delayed response.
Yes, I did correct the high idle, I simply has to adjust the stop screw which had previously been adjusted.
The yellow factory setting had been changed.
I'm not...
Forum: Honda Accord (1990 - 2002)
11-11-2012, 08:45 AM
Replies: 25
Views: 3,476
Posted By dglassmyer

Re: light vs. oem flywheel

I can speak to the benefit of a lightened flywheel.

I was in your shoes a few years prior to my manual swap wondering the same thing.
I went with an Exedy stage 1 clutch kit and a Fidanza 8 lb...
Forum: Honda Accord (1990 - 2002)
10-01-2012, 09:03 AM
Replies: 9
Views: 5,947
Posted By dglassmyer

Re: opinions on cv joint replacement

The bearing I am talking about is contained within the intermediate shaft body, that is what bolts to the block.
Have you ever noticed how much longer the passenger side axle is?
That's because...
Forum: Honda Accord (1990 - 2002)
09-30-2012, 10:45 AM
Replies: 9
Views: 5,947
Posted By dglassmyer

Re: opinions on cv joint replacement

A failing CV joint can cause everything you described.
Typically however, a cv will not cause a vibration that changes with speed.
Also be mindful of the intermediate shaft on the drivers side. ...
Forum: Honda Accord (1990 - 2002)
09-28-2012, 11:22 PM
Replies: 9
Views: 2,243
Posted By dglassmyer

Re: F23a to F22b swap

x2 on getting it tuned.
I would think long and hard about pairing the H trans with the F motor though.
Been there, done that.

The H trans will offer a hole shot however, imo its gears are too...
Forum: Honda Accord (1990 - 2002)
09-28-2012, 05:31 AM
Replies: 22
Views: 18,543
Posted By dglassmyer

Re: 96 accord head swap non vtec to vtec

Read my post earlier in this thread, it says exactly where the oil control orifice is.
Yes you have to remove it.
Use the B1 timing belt.
All of this is covered in the FAQ we already have.
Forum: Honda Accord (1990 - 2002)
09-26-2012, 08:44 AM
Replies: 71
Views: 45,243
Posted By dglassmyer

Re: 5th gen auto to 5speed conversion write up

There's an entire harness plug to the ecu that goes unused when doing this swap.
Its recommended you go ahead and spend the 50 bucks and change out the ecu to a manual.
If you don't, you will...
Forum: Honda Accord (1990 - 2002)
09-25-2012, 04:57 PM
Replies: 44
Views: 16,612
Posted By dglassmyer

Re: A Step by Step How to Add VTEC or Swap an H into your Accord

These H22 and afterfire questions, bumping the zombie oil change thread can only mean one thing...
Forum: Honda Accord (1990 - 2002)
09-22-2012, 01:01 PM
Replies: 2
Views: 1,427
Posted By dglassmyer

Re: jdm f22b sohc vtec swap into 94 accord

Welcome.
On your next post try turning off caps lock and using traditional capital letters to start a sentence.
Hitting the return button helps make your post easier to read as well.
I'm really...
Forum: Honda Accord (1990 - 2002)
09-22-2012, 12:37 PM
Replies: 5
Views: 4,161
Posted By dglassmyer

Re: 1999 Accord leaking oil after timing belt/water pump (pics)

First off its not the timing belt covers.
They are external of the engine and its oiling system.
I would recommend removing the valve cover and applying a thin covering of Honda-bond to the...
Forum: Honda Accord (1990 - 2002)
09-20-2012, 09:58 AM
Replies: 9
Views: 5,510
Posted By dglassmyer

Re: 01 LX, Cyl 4 Misfire, Low Compression

Just hang on a minute.
It is not a timing issue.
There is an easy way to narrow down exactly what is causing the loss of compression.
Take a few tablespoons of motor oil and pour it into the...
Forum: Honda Accord (1990 - 2002)
09-20-2012, 09:50 AM
Replies: 20
Views: 2,415
Posted By dglassmyer

Re: Getting my first Honda

This just sucks.
Your first Honda and it lasted 2 days lol.
Like mentioned above, its not the main relay if it is starting for any amount of time.
The main relay controls the fuel pump so if...
Showing results 1 to 25 of 419
 
Page 1 of 17
1
2
3
11
Last »


 
Forum Jump


All times are GMT -8. The time now is 07:54 AM.