Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 7
1
2
3
Last »
Search: Posts Made By: ShoofIsLudin
Showing results 1 to 25 of 159
Search took 0.48 seconds.
Forum: Honda Prelude
10-27-2012, 10:57 AM
Replies: 10
Views: 1,167
Posted By ShoofIsLudin

Re: 99 SH spun rod

not to mention SH with ATTS...does this guy not need an SH block?
Forum: Honda Prelude
10-20-2012, 09:26 PM
Replies: 10
Views: 2,149
Posted By ShoofIsLudin

Re: Rear Brakes locking

i had a very similar issue with my front right locking up, I loosened the master cylinder from the brake booster while it was locked up one day. Wheel freed up, and i just shimmed the master...
Forum: Honda Prelude
07-04-2012, 06:40 AM
Replies: 4
Views: 4,363
Posted By ShoofIsLudin

Re: F22 catback on H22 downpipe

no it won't fit. You'll need an h22 downpipe.
Might be easiest if you have the extra cash, and its legal in your state, to just order an ebay no name header. Its basically a stock design made of...
Forum: Honda Prelude
06-17-2012, 04:31 AM
Replies: 7
Views: 1,682
Posted By ShoofIsLudin

Re: flare nut leak on gearbox

damn man, thanks for updating your thread. I've seen engine gasket kits not have some important gaskets that they say come with it. I believe it to be a packaging error by the guy who doesn't give...
Forum: Honda Prelude
06-17-2012, 04:25 AM
Replies: 15
Views: 3,607
Posted By ShoofIsLudin

Re: 96 Prelude new a/c compressor not engaging

either you have a restriction/blockage, or u don't have enough freon on the system; other than that, make sure you have power to the compressor wire...

Just because its a new part doesn't mean its...
Forum: Honda Prelude
06-17-2012, 04:15 AM
Replies: 7
Views: 2,837
Posted By ShoofIsLudin

Re: 205/60/15 on 4th gen

it'll fit, ur speedometer will be slightly off due to improper tire size, but it won't be a huge difference.
Forum: Honda Prelude
06-14-2012, 03:53 PM
Replies: 15
Views: 3,607
Posted By ShoofIsLudin

Re: 96 Prelude new a/c compressor not engaging

yup. What he said, but if you don't have the money to replace the drier, just take it to a shop, tell them what you did, and have the evacuate, vacuum test, and re-charge your AC System.

When the...
Forum: Honda Prelude
06-14-2012, 03:51 PM
Replies: 2
Views: 2,979
Posted By ShoofIsLudin

Re: cost to clean head/replace valve seals?

find a local machine shop, call and ask
Forum: Honda Prelude
04-28-2012, 05:53 AM
Replies: 7
Views: 18,095
Posted By ShoofIsLudin

Re: Ruined sway bar bracket screw hole in frame

i'm not entirely sure how well a heli-coil will hold up to a sway bar mount. I have a similar issue.... One of my mounts ripped the bolt and threads out. Had someone who used to do body/frame...
Forum: Honda Prelude
04-14-2012, 04:27 AM
Replies: 11
Views: 1,782
Posted By ShoofIsLudin

Re: how much u think or have seen a lude with these bolt ons do

If this helps...... abused h22a (roughly 130K + miles, GOOD portion of them being race miles), h23a1 transmission, ebay intake (2.75"), dirty K&N filter, ebay stainless header with dented lower...
Forum: Honda Prelude
04-14-2012, 04:11 AM
Replies: 7
Views: 2,662
Posted By ShoofIsLudin

Re: 4th gen gearbox info.

I have to touch on this. ALTHOUGH all FWD H and F series transmissions do share the same bolt pattern to the block, The trans mount holes are different...when putting an f23 manual trans into my...
Forum: Honda Prelude
12-30-2011, 10:43 AM
Replies: 11
Views: 7,326
Posted By ShoofIsLudin

Re: MAJOR. OIL. LEAK.

If it seems like its coming from the oil filter area, Sounds like the oil cooler o-ring. It's a $3 oring from the dealer. And ud have to remove the oil filter, then use a 30mm socket to undo the...
Forum: Honda Prelude
11-05-2011, 04:47 AM
Replies: 20
Views: 3,194
Posted By ShoofIsLudin

Re: my 5 speed transmission acts like a automatic

have you adjusted the clutch pedal push rod??????
not once in this thread is adjustment even mentioned....

There's a 12mm nut on the back side of the rod, against the clutch pedal bracket. It...
Forum: Honda Prelude
10-19-2011, 01:50 PM
Replies: 5
Views: 877
Posted By ShoofIsLudin

Re: Tachometer Issue

try getting the rpm signal from the test wire at the pass. shock tower. Its a single blue wire. That's what I used when I had my goofy aftermarket tach.
Forum: Honda Prelude
08-18-2011, 03:41 PM
Replies: 14
Views: 6,618
Posted By ShoofIsLudin

Re: 5th gen Prelude has mechanics stumped…ideas?

the shop that did the t-belt said the timing was spot on after they "rechecked" it...? did they check mechanical timing (timing marks) or ignition timing?

Did the shop replace the timing...
Forum: Honda Prelude
08-12-2011, 05:46 PM
Replies: 10
Views: 1,656
Posted By ShoofIsLudin

Re: Head tech

at 8k rpm i wouldn't worry so much about air flow, as much as bottom end balance....
Forum: Honda CR-V & Element
08-09-2011, 02:04 PM
Replies: 9
Views: 2,376
Posted By ShoofIsLudin

Re: timing belt valves maintenance

do you guys replace the timing cover seals? Or only if they're completely tore up when it comes apart?

I know this is kind of an old/dead thread?
Forum: Honda Prelude
08-04-2011, 02:49 AM
Replies: 11
Views: 1,396
Posted By ShoofIsLudin

Re: Overheating. . . Really?

i have 12" cheapo fans on my full size aluminum radiator and it barely keeps it in check. Get better fans. Wire them in parallel.
Forum: Honda Prelude
08-04-2011, 02:44 AM
Replies: 8
Views: 1,735
Posted By ShoofIsLudin

Re: Anyone know the true fix for the 2-3k rpm hesitating???

my issue a while ago was caused by a messed up ICM in the distributor. Just replaced the distributor and it cleaned up. For others its different, but its damn sure annoying. if you can, try a...
Forum: Honda Prelude
07-15-2011, 05:39 PM
Replies: 6
Views: 2,542
Posted By ShoofIsLudin

Re: 1992 Prelude Transmission Help

if they're out of the accord....you may have to drill and tap the a tranny mount hole or 2. I blew my heavily abusd 240k mile m2s4 trans, replaced it with trans from a f23 accord. Bolts to the...
Forum: Honda Prelude
07-03-2011, 06:05 AM
Replies: 2
Views: 636
Posted By ShoofIsLudin

Re: thermal valve problem?

try a different distributor
Forum: Honda Prelude
07-03-2011, 06:03 AM
Replies: 24
Views: 1,782
Posted By ShoofIsLudin

Re: Holy gas mileage...

check for fuel leaks...injectors, lines etc....or u have a jacked up o2 sensor....or a bad tune.
Forum: Honda Prelude
06-25-2011, 02:56 PM
Replies: 302
Views: 64,219
Posted By ShoofIsLudin

Re: Why is the Prelude so unpopular?

cant get pregnant in the back seat of a prelude
Forum: Honda Prelude
06-25-2011, 02:54 PM
Replies: 21
Views: 79,864
Posted By ShoofIsLudin

Re: Effects of a Valve adjustment if done wrong

if you want ur valve lash done correctly, don't sit around and wait for someplace to do it. In the manual it says that the engine components should be less than 100 and something degrees Fahrenheit....
Forum: Honda Prelude
06-25-2011, 02:48 PM
Replies: 20
Views: 18,332
Posted By ShoofIsLudin

Re: With H22 (H2b) 11.1 compression how high can i rev?

stock h22a, dirty K&N filter on a 2.75" short ram, stock exhaust, ebay header basemap'd p28. starting falling off around 7200...
Showing results 1 to 25 of 159
 
Page 1 of 7
1
2
3
Last »


 
Forum Jump


All times are GMT -8. The time now is 02:20 PM.