Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 20
1
2
3
11
Last »
Search: Posts Made By: Psychoteen101
Showing results 1 to 25 of 500
Search took 0.76 seconds.
Forum: Honda CRX / EF Civic (1988 - 1991)
10-27-2017, 05:11 AM
Replies: 5
Views: 3,518
Posted By Psychoteen101

Re: Rear compensator arm replacements

Did a quick google search and didn't see anything except for people on forums having issues with them. Thanks for the link. Will try those.
Forum: Honda CRX / EF Civic (1988 - 1991)
10-26-2017, 06:56 PM
Replies: 5
Views: 3,518
Posted By Psychoteen101

Rear compensator arm replacements

Trying to do a rear disc conversion on an ef hatch with DA trailing arms. The suspension in it front and rear was totally roached. So in order to remove the rear compensator arms, I had to cut one...
Forum: Forced Induction
05-18-2017, 11:36 AM
Replies: 2
Views: 1,403
Posted By Psychoteen101

Recommendation Request: 600-700whp K20 Turbocharged using E85 Fuel

Want to get an idea of what plugs to run in a turbo K20 with e85. Highest power should be 6-700. Had it on the dyno last season running ngk bkr8eix plugs gapped at .018. And around 25-26 psi, it...
Forum: Honda CR-V & Element
04-03-2017, 01:03 PM
Replies: 0
Views: 1,476
Posted By Psychoteen101

2004 crv P1077 after motor swap

got an 04 crv with a k24a1 that had a cracked block. Swapped it for a imported motor from Japan. I believe is a k24a. Some stuff naturally was different with the new motor. Throttle body only used...
Forum: Tech / Misc
11-23-2016, 02:07 PM
Replies: 0
Views: 2,734
Posted By Psychoteen101

1999 civic sedan p1768 flashing D4

Got a 99 civic sedan with a d16y7, auto trans. I replaced the rear main seal and put it back together and now I get a hard p1768. Won't clear. D4 flashing. Everything is plugged in, no pinched wires....
Forum: Forced Induction
10-13-2016, 01:45 PM
Replies: 22
Views: 2,566
Posted By Psychoteen101

Re: Assistance needed: BW S362 creates (Blue) oil smoke during idle conditions

Appreciate the pictures to give me an idea. The chra is pretty close to straight up and down. Picture doesn't give the best idea. I wish the drain line was as easy to route as all those B series...
Forum: Forced Induction
10-12-2016, 05:21 PM
Replies: 22
Views: 2,566
Posted By Psychoteen101

Re: Assistance needed: BW S362 creates (Blue) oil smoke during idle conditions

Thanks Shodan. As usual, you come through with the best info. CHRA? Unfamiliar with that term. The turbo itself on the manifold sits on an upward angle, maybe 20 degrees or so. It's a BWR manifold....
Forum: Forced Induction
10-12-2016, 08:09 AM
Replies: 22
Views: 2,566
Posted By Psychoteen101

Re: Assistance needed: BW S362 creates (Blue) oil smoke during idle conditions

http://i1036.photobucket.com/albums/a442/nathaniel_bacon101nathaniel_bacon101/Mobile%20Uploads/image_zpsnrbh7r2q.jpeg...
Forum: Forced Induction
10-11-2016, 05:58 PM
Replies: 22
Views: 2,566
Posted By Psychoteen101

re: Assistance needed: BW S362 creates (Blue) oil smoke during idle conditions

Yea I thought that might be an issue. Are 45's still too much? I doubt I can fit a 30 or a straight on there, especially off the turbo. Got very little clearance
Forum: Forced Induction
10-11-2016, 02:57 PM
Replies: 22
Views: 2,566
Posted By Psychoteen101

Assistance needed: BW S362 creates (Blue) oil smoke during idle conditions

Turbo K20 with a s362 using a divided housing, sometimes at idle or when coasting, I get some blue smoke from the exhaust as if a turbo seal is going bad. Been getting worse. Used to run a 6262...
Forum: Forced Induction
09-09-2016, 10:47 AM
Replies: 8
Views: 2,562
Posted By Psychoteen101

Re: Walbro 400 fueling issue

It's been a while so I don't remember if I reused the old sock or used one that came with the pump. And I'll check the hose this weekend. Thanks for the input
Forum: Forced Induction
08-31-2016, 05:20 PM
Replies: 8
Views: 2,562
Posted By Psychoteen101

Re: Walbro 400 fueling issue

Didn't look at the hose super close. Looked intact when I had the pump out, but I'll check again. Car runs great with a full tank of fuel at any boost level so I doubt pressure is dropping out. The...
Forum: Forced Induction
08-29-2016, 05:09 PM
Replies: 8
Views: 2,562
Posted By Psychoteen101

Walbro 400 fueling issue

Having some fueling issues, not sure exactly what the cause is. Trying to get some feedback if anybody has any ideas. Turbo k20 in an eg. Running a walbro 400 on the stock hanger, ID 2000s and e85....
Forum: Appearance Build Threads
05-18-2016, 06:02 PM
Replies: 11
Views: 4,450
Posted By Psychoteen101

Re: From Rice to Nice (EF hatch build) lots of pics/DIY info

http://i1036.photobucket.com/albums/a442/nathaniel_bacon101nathaniel_bacon101/IMG_0278_zpsvbe5ndkz.jpg...
Forum: Appearance Build Threads
05-18-2016, 05:34 PM
Replies: 11
Views: 4,450
Posted By Psychoteen101

Re: From Rice to Nice (EF hatch build) lots of pics/DIY info

Those wheels i used to have on my EG, but they work better on the EF because they were released around 89'. I also have a set of Mugen MR-5's to put on this as well when i feel like switching it up.
Forum: Appearance Build Threads
05-15-2016, 12:53 PM
Replies: 11
Views: 4,450
Posted By Psychoteen101

Re: From Rice to Nice (EF hatch build) lots of pics/DIY info

Continued pulling parts off the car

http://i1036.photobucket.com/albums/a442/nathaniel_bacon101nathaniel_bacon101/012_zps7vcfh6qv.jpg...
Forum: Appearance Build Threads
05-15-2016, 12:27 PM
Replies: 11
Views: 4,450
Posted By Psychoteen101

Re: From Rice to Nice (EF hatch build) lots of pics/DIY info

Stripped down the H to the long block

http://i1036.photobucket.com/albums/a442/nathaniel_bacon101nathaniel_bacon101/006_zpstkvksxos.jpg...
Forum: Appearance Build Threads
05-13-2016, 05:52 PM
Replies: 11
Views: 4,450
Posted By Psychoteen101

Re: From Rice to Nice (EF hatch build) lots of pics/DIY info

Started to strip down the DA trailing arms

http://i1036.photobucket.com/albums/a442/nathaniel_bacon101nathaniel_bacon101/IMG_0251-1_zpsrwa5rqx8.jpg...
Forum: Appearance Build Threads
05-12-2016, 07:56 PM
Replies: 11
Views: 4,450
Posted By Psychoteen101

Re: From Rice to Nice (EF hatch build) lots of pics/DIY info

After a slight let down from the DA purchase, i continued hacking away and removing parts from the EF.
...
Forum: Appearance Build Threads
05-12-2016, 07:35 PM
Replies: 11
Views: 4,450
Posted By Psychoteen101

Re: From Rice to Nice (EF hatch build) lots of pics/DIY info

I randomly stumbled upon a DA integra, mostly complete for sale locally seemingly pretty cheap ($350). Other than interior pieces, it was mostly complete. So i picked it up with plans to strip it,...
Forum: Appearance Build Threads
05-12-2016, 07:26 PM
Replies: 11
Views: 4,450
Posted By Psychoteen101

Re: From Rice to Nice (EF hatch build) lots of pics/DIY info

Im kind of going a little all over the place to start this. Ive been collecting random parts over the years and more recently. Shortly after buying the car, i gathered most of the body panels id need...
Forum: Appearance Build Threads
05-12-2016, 07:04 PM
Replies: 11
Views: 4,450
Posted By Psychoteen101

From Rice to Nice (EF hatch build) lots of pics/DIY info

Been a while since i did a build on here or in general. Ive spent most of my time and money on my never ending EG project that i dedicated a previous build thread to. Still in progress, trying to get...
Forum: Forced Induction
08-19-2015, 06:54 PM
Replies: 9
Views: 3,069
Posted By Psychoteen101

Re: Turbo vacuum line diameter

Excellent. I'm hoping it won't cause any problems. Thanks for the info
Forum: Forced Induction
08-19-2015, 04:32 PM
Replies: 9
Views: 3,069
Posted By Psychoteen101

Re: Turbo vacuum line diameter

The lines attach the fittings with crush sleeves, wouldn't that cause restriction?
Forum: Forced Induction
08-19-2015, 11:19 AM
Replies: 9
Views: 3,069
Posted By Psychoteen101

Re: Turbo vacuum line diameter

Bottle necks?
Showing results 1 to 25 of 500
 
Page 1 of 20
1
2
3
11
Last »


 
Forum Jump


All times are GMT -8. The time now is 05:03 PM.