Notices
 
Search: Posts Made By: MUGEN_EG95
Showing results 1 to 25 of 107
Search took 0.60 seconds.
06-22-2012, 03:52 PM
Replies: 12
Views: 2,903
Posted By MUGEN_EG95

Re: 99 civic si fluctuating idle and random misfires

did u have the misfires along with that?
06-21-2012, 08:07 PM
Replies: 12
Views: 2,903
Posted By MUGEN_EG95

Re: 99 civic si fluctuating idle and random misfires

it ticks a little bit after i adjusted them so im jus saying its a little loose thats all. it was too tight before n it idle low n rough.
06-21-2012, 07:20 PM
Replies: 12
Views: 2,903
Posted By MUGEN_EG95

Re: 99 civic si fluctuating idle and random misfires

no i dont wished i could borrow someones n slap it on just to c if it fixes the problem
06-21-2012, 07:14 PM
Replies: 12
Views: 2,903
Posted By MUGEN_EG95

Re: 99 civic si fluctuating idle and random misfires

i mean to say its not OEM but do u think too loose of a valve adjustment will cause such misfires?
06-21-2012, 07:13 PM
Replies: 12
Views: 2,903
Posted By MUGEN_EG95

Re: 99 civic si fluctuating idle and random misfires

current dizzy is brand new but not aftermarket though i suspected it might be that but havent ran any tests yet
06-21-2012, 07:12 PM
Replies: 12
Views: 2,903
Posted By MUGEN_EG95

Re: 99 civic si fluctuating idle and random misfires

Yes everything is stock except intake,headers,exhaust. Codes will start with p0301 and then p0302,p0303,p0304 n p1399 after driving it down the street but it doesnt feel like its misfiring. nice...
06-21-2012, 05:44 PM
Replies: 12
Views: 2,903
Posted By MUGEN_EG95

99 civic si fluctuating idle and random misfires

My friend just got a burnt exhaust valve replaced along with valve job. It was running great after i put it together but three months later it started to misfire. He took it to the shop n they fried...
03-30-2012, 08:48 PM
Replies: 12
Views: 2,064
Posted By MUGEN_EG95

Re: gsr swapped eg6 running rich and dies at WOT

I found the problem......it was just a simple overlooked mistake! i freaken switched the MAP n TPS connectors lol! I tried swapping it before but forgot to clear the ecu....rookie mistake! Thanks...
03-30-2012, 04:43 PM
Replies: 12
Views: 2,064
Posted By MUGEN_EG95

Re: gsr swapped eg6 running rich and dies at WOT

i read that only ob2 gsr has it?
03-30-2012, 04:38 PM
Replies: 12
Views: 2,064
Posted By MUGEN_EG95

Re: gsr swapped eg6 running rich and dies at WOT

i dont remember installing a crank sensor into my 95 gsr! This might be a problem! but theres no extra plug for it though!
03-30-2012, 03:36 PM
Replies: 12
Views: 2,064
Posted By MUGEN_EG95

Re: gsr swapped eg6 running rich and dies at WOT

I ran the knock sensor wire today but still the same. Checked for leaks with the carb cleaner, and tested a different dizzy! Its still doing the same thing its so frustrating. Everything was working...
03-29-2012, 10:45 PM
Replies: 12
Views: 2,064
Posted By MUGEN_EG95

Re: gsr swapped eg6 running rich and dies at WOT

i'll wire that knock sensor tomorrow and report back! Thanks a bunch
03-29-2012, 08:30 PM
Replies: 12
Views: 2,064
Posted By MUGEN_EG95

Re: gsr swapped eg6 running rich and dies at WOT

my timing on the crank pully is good......white notch is at the pointer and the cam gears are up and the dash marks are pointing at each other. No visible vacuum hose leaks n no check engine lights.
03-29-2012, 08:16 PM
Replies: 12
Views: 2,064
Posted By MUGEN_EG95

gsr swapped eg6 running rich and dies at WOT

Hello people i got an eg that has a gsr swap. I put a new headgasket in and ran a compression test. 180psi all across! Its all stock except for a hondata intake mani gasket. Its running really rich...
11-08-2009, 01:46 PM
Replies: 5
Views: 1,117
Posted By MUGEN_EG95

Re: b16a1 in ej1 smogable?

just to recheck, I need parts from a del sol that had the original b16a3 in it? Or can any del sol emission parts can be used?
11-08-2009, 01:30 PM
Replies: 5
Views: 1,117
Posted By MUGEN_EG95

Re: b16a1 in ej1 smogable?

alright so it is smogable. I'm gonna go search for a del sol then. Thanks guys.
11-07-2009, 03:29 PM
Replies: 5
Views: 1,117
Posted By MUGEN_EG95

b16a1 in ej1 smogable?

I have a b16a1 in a 95 ej1 and i'm about to try to bar it to pass smog. Has this been done before? What parts will i need to pass the reff?
10-13-2009, 06:26 PM
Replies: 1
Views: 2,053
Posted By MUGEN_EG95

Re: radio doesnt work

I rechecked today and found out that the fuse under the hood is blown but when i replaced it with a new one it blew again. Theres a short somewhere in the wires. Driving me nuts. CAnt find the damn...
10-12-2009, 08:52 PM
Replies: 1
Views: 2,053
Posted By MUGEN_EG95

radio doesnt work

Got a 98 acura cl that has a radio problem. Girlfriend pushed the cigarette lighter in and radio died. I check the fuse under dash n on the deck, ground, ran a new 12v power n ground line to it but...
10-10-2009, 01:55 PM
Replies: 8
Views: 648
Posted By MUGEN_EG95

Re: shifter problem

Thanks guys.
10-10-2009, 01:20 PM
Replies: 8
Views: 648
Posted By MUGEN_EG95

shifter problem

I have a 97 civic hatch and the shift wiggles side to side a lot in neutral. It moves so far that it touches my thighs. Could this be the bushing going bad or the shift linkage? Feels really loose 2!
09-22-2009, 07:02 PM
Replies: 8
Views: 857
Posted By MUGEN_EG95

Re: Go with stock pulley or aftermarket?

Okay thanks people i'll pick up a stock pulley soon!
09-21-2009, 07:17 PM
Replies: 8
Views: 857
Posted By MUGEN_EG95

Go with stock pulley or aftermarket?

Own a 95 ej1 and crank pulley is bad. Is it recommended to stay stock? or an aftermarket one? I heard that aftermarket ones are bad for the main bearings. Any help will be appreciated!
07-14-2009, 06:32 PM
Replies: 3
Views: 2,509
Posted By MUGEN_EG95

Re: oil pan for jdm zc sohc non vtec

I replaced mine last year on my sohc zc. I used my d16z6 and it works. I think u can use any d series pan!
Forum: Acura Integra
06-17-2009, 03:42 PM
Replies: 3
Views: 2,186
Posted By MUGEN_EG95

Re: Removing driver side axle

I got it off by removing the whole shaft and the piece that bolts to the block. Thanks guyz!!
Showing results 1 to 25 of 107
 


 
Forum Jump


All times are GMT -8. The time now is 08:28 AM.