Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 5
1
2
3
Last »
Search: Posts Made By: skracer13
Showing results 1 to 25 of 113
Search took 0.73 seconds.
Forum: Honda Accord & Crosstour (2003 - 2012)
10-07-2010, 12:40 PM
Replies: 13
Views: 4,427
Posted By skracer13

Re: 05 V6 timing belt

I would recommend all OEM Honda parts for your maintainence. Especially if you plan to keep it for a while. You can get away with aftermarket, but for my personal vehicle I always use OEM (Keep in...
Forum: Honda Accord & Crosstour (2003 - 2012)
10-07-2010, 12:17 PM
Replies: 16
Views: 119,961
Posted By skracer13

Re: Car won't start makes clicking noise

Test your to see if it is indeed your starter, have someone try to start the vehicle and you tap on the starter. If it starts right up then it's definately the starter. It won't always work but its...
Forum: Honda Accord & Crosstour (2003 - 2012)
10-07-2010, 12:09 PM
Replies: 6
Views: 15,860
Posted By skracer13

Re: How do you drain coolant on the V6 from the block plug?

Block Plug (I'm guessing your referring to the freeze plugs) are there to relieve pressure in case of freezing, (if not then you shouldn't be removing your threaded plugs anyways) not to flush your...
Forum: Honda Prelude
10-07-2010, 12:04 PM
Replies: 6
Views: 1,337
Posted By skracer13

Re: my 96 lude idles up and down wen cold and makes funny noise????

Check IACV and/or for vaccum leaks.
Forum: Honda Civic / Del Sol (1992 - 2000)
08-30-2010, 05:48 PM
Replies: 21
Views: 8,105
Posted By skracer13

Re: Ls/Vtec High rpm issues

It really sounds like your ecu, try to find a p72 or a p13 which has the secondary required by the 18c1 intake manifold (or an ecu that has all these function disable). Then make sure the knock...
Forum: Honda Accord (1990 - 2002)
08-26-2010, 06:51 PM
Replies: 53
Views: 7,297
Posted By skracer13

Re: trouble getting cylinder head bolts off...

You mess up using a 12 point on a head bolt. I hope you didn't buy a cheap set of bolt extractor. Get a good set (you get what you pay for), they are not created equally. A good set will bite into...
Forum: Honda Civic / Del Sol (1992 - 2000)
08-25-2010, 01:48 PM
Replies: 17
Views: 2,350
Posted By skracer13

Re: Need Diagnostic help with engine power loss

You are correct, 1 tooth off would not cause the #2 cyl. pressure to become 0.
Forum: Honda Civic / Del Sol (1992 - 2000)
08-25-2010, 06:18 AM
Replies: 5
Views: 1,770
Posted By skracer13

Re: 94 civic overheating issue

cool
Forum: Honda Civic / Del Sol (1992 - 2000)
08-24-2010, 07:15 PM
Replies: 17
Views: 2,350
Posted By skracer13

Re: Need Diagnostic help with engine power loss

Let's just say there's carbon build up keeping your valve to stay open, I've rebuild many many cars and I can tell you it takes quite a bit of time to polish those valve to remove carbon build up....
Forum: Honda Accord & Crosstour (2003 - 2012)
08-24-2010, 04:53 PM
Replies: 5
Views: 3,090
Posted By skracer13

Re: Loose steering, brake jutter, and excessive vibration

loose steering can be an indication of bad tie rod ends, jack car up and put on stands. Wiggle the wheel, if loose, it might be the tie rod ends or wheel bearings. Is the car vibrating or pulsing...
Forum: Honda Civic / Del Sol (1992 - 2000)
08-24-2010, 04:46 PM
Replies: 21
Views: 8,105
Posted By skracer13

Re: Ls/Vtec High rpm issues

What ecu are you running? p28, p72......
Forum: Honda Civic / Del Sol (1992 - 2000)
08-24-2010, 04:42 PM
Replies: 17
Views: 2,350
Posted By skracer13

Re: Need Diagnostic help with engine power loss

Was 90-100psi max pressure or just one bump? probable cause on #2 cyl. head gasket, head warp, bent valves, rings, or worst case senario: bent valve and a hole in your piston.
Forum: Acura Integra
08-24-2010, 02:50 PM
Replies: 5
Views: 858
Posted By skracer13

Re: burning oil..

I'm assuming your running a turbo with that compression. At inital fill, the system requires more oil to go through engine. If fill then check and didn't let the engine run before checking, then that...
Forum: Honda Civic (2001 - 2005)
08-24-2010, 02:28 PM
Replies: 3
Views: 820
Posted By skracer13

Re: A/C working intermittantly

How did you come to the conclusion that you have enough refrigerant? Did you put a gauge on to see how much refrigerant? Intermitting condition or barely cold air usally indicates low refrigerant....
Forum: Honda Civic / Del Sol (1992 - 2000)
08-24-2010, 02:21 PM
Replies: 5
Views: 1,770
Posted By skracer13

Re: 94 civic overheating issue

Fan not coming on at that temperature indicates a malfuntion in your fan circuit. Check the fuses. After you know you have power through out the circuit, bypass the fan switch to check the sensor...
Forum: Honda Civic / Del Sol (1992 - 2000)
08-24-2010, 02:16 PM
Replies: 17
Views: 2,350
Posted By skracer13

Re: Need Diagnostic help with engine power loss

When you changed the spark plugs, was there oil on the plugs? If so that can cause improper ignition, or too much blow by, hence the loss of power. Either way check compression, each cylinder...
Forum: Honda Accord (1990 - 2002)
08-24-2010, 12:37 PM
Replies: 3
Views: 783
Posted By skracer13

Re: 95 ACCORD LX

re-check timing and then compression test for bent valve. ^ interference engine.
Forum: Honda Accord (1990 - 2002)
07-11-2010, 05:27 PM
Replies: 9
Views: 22,909
Posted By skracer13

Re: help, i stripped the ball joint bolt thread!!!

Sorry if I didn't make it clearer, IT'S NOT MADE TO BE REPLACED but can be (please don't try if not mechanically incline) by gently grinding on the top portion of the ball joint and flipping it over...
Forum: Acura Integra
07-11-2010, 05:04 PM
Replies: 14
Views: 3,072
Posted By skracer13

Re: ...HELP... Car randomly won't start

check coil, ignitor, and main relay.
Forum: Acura Integra
07-11-2010, 05:02 PM
Replies: 8
Views: 1,657
Posted By skracer13

Re: Whats the upper 5 point hex bolt on trans?

12 is to drain and 18 is to fill. 13 and 14 are used for dismantling the transmission. you wont get far trying to fill @14.
Forum: Acura Integra
07-11-2010, 04:56 PM
Replies: 1
Views: 842
Posted By skracer13

Re: Need help with major loss of power!

Check your IACV (idle air control valve), when the ac is on the ecu will open up the IACV to compensate for the extra load at idle.
Forum: Acura Integra
07-11-2010, 04:53 PM
Replies: 4
Views: 784
Posted By skracer13

Re: problem wit distributor?

Fuse and ^
Forum: Acura Integra
07-11-2010, 04:37 PM
Replies: 1
Views: 2,888
Posted By skracer13

Re: 94 GSR swapped into 93 DA9 ??

(Assuming this is just the engine only, if not then you will need a cable to hydro converter for your b18c1 tranny.) For starter you will have to swap the driver side mount from the DA to the c1...
Forum: Honda Accord (1990 - 2002)
07-11-2010, 04:18 PM
Replies: 5
Views: 813
Posted By skracer13

Re: 94lx W/ F23 Turbo Advice

stay below 6psi on stock sleeves, (10psi MAX and that's if you can tune). Buy a kit instead of trying to piece everything together, will save you the head ache later. Injectors, 2 or 3 bar map...
Forum: Honda Accord (1990 - 2002)
07-11-2010, 04:11 PM
Replies: 8
Views: 1,590
Posted By skracer13

Re: 94 Accord - Fuel pump?

if you have access to an oscillascope,(snap on works good) then you can use it to see if it is indeed the fuel pump acting up or another culprit. Compare the siganl waves to when the car is acting...
Showing results 1 to 25 of 113
 
Page 1 of 5
1
2
3
Last »


 
Forum Jump


All times are GMT -8. The time now is 06:58 AM.