Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 20
1
2
3
11
Last »
Search: Posts Made By: BlUAc
Showing results 1 to 25 of 498
Search took 0.91 seconds.
Forum: Honda Accord (1990 - 2002)
07-24-2013, 05:27 PM
Replies: 2
Views: 649
Posted By BlUAc

dropped injector

I was swapping my 345cc injectors for the stock ones gettin it ready for smog and I dropped one of them and the plastic tip on the jet side broke. the jet tip looks good still, I think it landed at...
Forum: Honda Accord (1990 - 2002)
11-17-2012, 09:19 PM
Replies: 7
Views: 2,612
Posted By BlUAc

Re: 1991 Honda Accord EX - Sticks in Park and Slow Acceleration

the h4a link is very informitive. In my 90 I had a similar problem an it turned out to be the passing gear cable was out of alignment at the tranny, there is a cable from the tb to the tranny in...
Forum: Honda Accord (1990 - 2002)
11-17-2012, 09:06 PM
Replies: 24
Views: 5,542
Posted By BlUAc

Re: ecu is chipped but no vtec?

correct me if im wrong Its been a while for me, but isn't it a4 an d6. also if your check engine light is on it might be because of pins a11 and a6 need to be switched on the harness. The 94-97...
Forum: Honda Accord (1990 - 2002)
05-07-2011, 10:52 PM
Replies: 11
Views: 1,110
Posted By BlUAc

Re: cure for slow?

you were given a licenses to drive?
Forum: Honda Accord (1990 - 2002)
05-07-2011, 10:48 PM
Replies: 11
Views: 1,110
Posted By BlUAc

Re: cure for slow?

I also would suggest you do the auto 2 manual swap, then look at nitrous, turbo ect. not much support as for cams though you can do valve train an pistons. I have been looking since i did my auto 2...
Forum: Honda Accord (1990 - 2002)
05-07-2011, 10:28 PM
Replies: 10
Views: 2,389
Posted By BlUAc

Re: 90-97 accord aftermarket cooling fan question

i have only 1 since i bought the car an it seems to be just fine, not over heating at all
Forum: Honda Accord (1990 - 2002)
05-07-2011, 10:26 PM
Replies: 4
Views: 5,706
Posted By BlUAc

Re: 94 Accord ECU interchangability??

ya thats uur only option because of the cam profile and the wiring on the ecu
Forum: Honda Accord (1990 - 2002)
05-07-2011, 10:19 PM
Replies: 7
Views: 24,626
Posted By BlUAc

Re: Car sputtering/rough idling when first started

you said uur fuel is in top condition, so you replaced the fuel filter. that was the first thing that popped in my head.
Forum: Honda Accord (1990 - 2002)
03-06-2011, 06:12 PM
Replies: 3
Views: 578
Posted By BlUAc

Re: TURBO manifold quastion. --PLEASE HELP

If the ex mani ports are 0 00 0 then it will work but I think the h22 are 0 0 0 0 spaced
Forum: Honda Accord (1990 - 2002)
03-06-2011, 06:04 PM
Replies: 6
Views: 4,312
Posted By BlUAc

Re: f22a1 swap

You will need to do some slight wire an coolant hose rerouting. Due to the eiacv and fitv..
Forum: Honda Accord (1990 - 2002)
11-08-2010, 05:08 PM
Replies: 2
Views: 2,786
Posted By BlUAc

Re: 1990 Honda Accord error code

41 02 sensor if i remember correctly my cuz is shooting the same code an im on here ryt now tryn 2 find the cel codes 2 b sure... but cant find it in the faq
Forum: Honda Accord (1990 - 2002)
07-08-2010, 08:46 PM
Replies: 7
Views: 10,965
Posted By BlUAc

Re: How do you clean your air boost valve?

um i dont know what is an air boost valve, if it is what im thinking of on the im on the driver side on the top corner there is a spring, but you dont need to clean it I have a 90 and I just checked...
Forum: Honda Accord (1990 - 2002)
06-13-2010, 08:41 AM
Replies: 6
Views: 8,244
Posted By BlUAc

Re: chipped p06 in f22b1

well when I put the head on I also changed the rings and replaced the main an rod bearings so I have been driving without a vtec ecu so it wont temt me to try an hit it. and it runs good up till bout...
Forum: Honda Accord (1990 - 2002)
06-12-2010, 01:45 PM
Replies: 6
Views: 8,244
Posted By BlUAc

Re: chipped p06 in f22b1

Na I put in the p28 and ran good but idled rough and it hit vtec at 5 grand but it wasnt as powerful.. and i shoud have said its an a1 block in my 90 I had the head layin around an said wat the ...
Forum: Honda Accord (1990 - 2002)
06-12-2010, 11:10 AM
Replies: 6
Views: 8,244
Posted By BlUAc

chipped p06 in f22b1

I have a question on if I can runn a chipped p06 converted to vtec in my f22b1? I saw a thread about the muffin man saying it wont run good on a thread while I was searching the archives. Just...
Forum: Honda Accord (1990 - 2002)
03-03-2010, 06:57 PM
Replies: 1
Views: 863
Posted By BlUAc

Re: NEED HELP WITH DISTRIBUTOR

well there is only one way to put on the dizzy, the two slits on the cam lock the dizzy in. when you put the dizzy up to the cam it should sit flush, if it does not then rotate the dizzy "teeth" 180...
Forum: Honda Accord (1990 - 2002)
02-13-2010, 07:27 PM
Replies: 16
Views: 23,543
Posted By BlUAc

Re: Temperature Gauge Problem on 91 Accord

well my haynes dosent specify the resistance but the sensor for the temp gauge is the small one under the dizzy and the one for the fans is on the t-stat housing. I dont know which sensor your...
Forum: Honda Accord (1990 - 2002)
02-13-2010, 06:51 PM
Replies: 1
Views: 514
Posted By BlUAc

Re: 90 LX Fuel Pressure?

your haynes is correct maybe you should change fuel filter
Forum: Honda Accord (1990 - 2002)
02-13-2010, 06:49 PM
Replies: 3
Views: 527
Posted By BlUAc

Re: need help on my accord

i know that u bridge the plug under the glove box to get a cel code, but i believe there is a blinking light on the TCU that gives a code
Forum: Honda Accord (1990 - 2002)
02-09-2010, 07:45 PM
Replies: 6
Views: 1,493
Posted By BlUAc

Re: Starting problem, Running problem

have you checked the spark my first impression was bad coil or igniter. especially since you said on name dizzy. also what was the psi on your comp test
Forum: Honda Accord (1990 - 2002)
02-06-2010, 04:42 PM
Replies: 5
Views: 1,212
Posted By BlUAc

Re: wiring jdm sidemarkers accord

yes all you have to do take out your corner lights and splice into the blinker wires
Forum: Honda Accord (1990 - 2002)
04-29-2009, 03:30 AM
Replies: 5
Views: 1,443
Posted By BlUAc

Re: F22 vtec swap on 90 ex accord wont start

well maybe u should use the vtec ecu and dizzy
Forum: Honda Accord (1990 - 2002)
04-28-2009, 07:36 PM
Replies: 2
Views: 680
Posted By BlUAc

Re: 92 CB7 likes to die

u say u hit the gas, do u keep on the pedal or do u let off? Then does it die right after it shifts or does the rpm go down a lil? also has it happen b4 or after u put in the grounding kit in? and...
Forum: Honda Accord (1990 - 2002)
04-28-2009, 07:31 PM
Replies: 2
Views: 524
Posted By BlUAc

Re: 92 accord

more info please, well if u want help b more difinitive
Forum: Honda Prelude
04-28-2009, 07:28 PM
Replies: 7
Views: 848
Posted By BlUAc

Re: nox emisions is really high

so nobody here either? I was told bout cold plugs n e info on if those will help?
Showing results 1 to 25 of 498
 
Page 1 of 20
1
2
3
11
Last »


 
Forum Jump


All times are GMT -8. The time now is 01:10 PM.