Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 18
1
2
3
11
Last »
Search: Posts Made By: hmtcrxsir
Showing results 1 to 25 of 445
Search took 1.21 seconds.
Forum: Honda Civic / Del Sol (1992 - 2000)
01-31-2019, 04:50 PM
Replies: 12
Views: 8,739
Posted By hmtcrxsir

Re: EG6 Power Folding Mirror Diagram

Swapping mirror shells? Can I just swap the mirror alone by itself.

Yes I have the power folding mirrors already. However, I need to wire it up myself since DX doesn’t come equipped with it. But...
Forum: Honda Civic / Del Sol (1992 - 2000)
01-31-2019, 10:51 AM
Replies: 12
Views: 8,739
Posted By hmtcrxsir

Re: EG6 Power Foldering Mirror Diagram

So if I don’t have the pigtail, you recommend that I get the pigtails off of a civic ex or si? And then add an extra wire for folding?
Forum: Honda Civic / Del Sol (1992 - 2000)
01-30-2019, 10:35 PM
Replies: 12
Views: 8,739
Posted By hmtcrxsir

Re: EG6 Power Foldering Mirror Diagram

Thanks for the diagram! But is there a simplified version? Apparently the seller didn’t include the pigtails for the mirrors. So I have to modify it somehow or find one
Forum: Honda Civic / Del Sol (1992 - 2000)
01-30-2019, 09:37 PM
Replies: 12
Views: 8,739
Posted By hmtcrxsir

Re: EG6 Power Foldering Mirror Diagram

Your method is for complete power window and door lock swap. I am not doing all that. I just need to do the power mirror conversion. Your mirror comes heated. I only have power folding only. So the...
Forum: Honda Civic / Del Sol (1992 - 2000)
01-30-2019, 10:38 AM
Replies: 12
Views: 8,739
Posted By hmtcrxsir

Re: EG6 Power Foldering Mirror Diagram

Anyone?
Forum: Honda Civic / Del Sol (1992 - 2000)
01-29-2019, 08:56 AM
Replies: 12
Views: 8,739
Posted By hmtcrxsir

EG6 Power Folding Mirror Diagram

I have been researching for eg6 power folding mirror diagram but I keep getting the diagram for an ek9. I also searched on HT forum and can not locate one. Anyone have one available or know where i...
Forum: Honda Civic / Del Sol (1992 - 2000)
01-16-2019, 01:18 AM
Replies: 5
Views: 767
Posted By hmtcrxsir

Integra GSR brakes into EG Question

I’m sure it’s been covered but I can’t seem to find any post about it. If I wanted to swap out a 92 Civic DX hatchback full front brake to the full Integra GSR front brake conversion. And I am...
Forum: Honda Civic / Del Sol (1992 - 2000)
06-30-2017, 03:45 PM
Replies: 1
Views: 784
Posted By hmtcrxsir

Re: D15b7 replaced clutch, now wont start up

Forgot to mention, prior to the clutch replacement; the engine starts up perfectly each time.
Forum: Honda Civic / Del Sol (1992 - 2000)
06-30-2017, 03:42 PM
Replies: 1
Views: 784
Posted By hmtcrxsir

D15b7 replaced clutch, now wont start up

I have a 95 Honda Civic DX w/ D15b7 engine. Recently, it was recovered from theft recovery. The person who stole the vehicle took the vehicle on a joy ride and completely burnt out the clutch. As a...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-20-2017, 11:27 PM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

Tapped it with helicoil and a plug. Then I JB weld it up to ensure that it doesn't leak. Then a quick shot of engine gloss black to cover the ugly JB weld gray. Doubt it looks like I ever opened it...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-19-2017, 01:31 AM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

https://cimg5.ibsrv.net/gimg/honda-tech.com-vbulletin/2000x1600/80-img_5888_94d94e314dfbd73dfd21104069c2515f9b77b9cf.jpg...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-18-2017, 01:41 AM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

I replaced the CAT under the vehicle next to the shift linkage. I never thought of that. But I never realized that there were a manifold CAT on the exhaust manifold by the headers. But judging by...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-17-2017, 09:15 PM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

When I had the EGR off, I sprayed the EGR with CARB cleaners and scrubbed it down with a metal pipe brush. I applied vacuum to the EGR and sprayed the EGR port down with CARB cleaner until there was...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-17-2017, 07:47 PM
Replies: 3
Views: 1,947
Posted By hmtcrxsir

Re: Simple EGR question

I have took it out of the vehicle and cleaned it. It wasn't as dirty as I had expected, but I cleaned it and tested it with a manual hand vacuum. It is holding vacuum with no leaks. How should I...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-17-2017, 04:06 PM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

So what do you think it is? I cleaned the EGR thoroughly. Is it normal for the engine to not stall if I apply vacuum to it while the engine is running?
Forum: Honda CRX / EF Civic (1988 - 1991)
04-17-2017, 01:22 AM
Replies: 3
Views: 1,947
Posted By hmtcrxsir

Simple EGR question

I have a 91 Crx HF with D15b6. I was wondering if it is normal for the engine not to stall if I apply vacuum to the EGR while the engine is running? I cleaned the EGR very thoroughly and reinstalled...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-15-2017, 09:45 PM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

So here are the results from the first and second smog test.

1st smog check
15mph
2392 rpm
CO2(%) 14.83
O2(%) 0.40
HC(ppm) 100 max, 41 average, 88 measure
CO(%) 0.61 max, 0.16 average, 0.04...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-14-2017, 11:41 AM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

Wow. Thank you for a detailed post. I really appreciate it. I will take your advice to thoroughly clean the EGR and the ports as well. Possibly even replacing the EGR valve. Would you suggest running...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-13-2017, 09:24 PM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

Could the constant vacuum control valve (CVC) be defective? I tested the pressure on the EGR vac line with the vacuum pressure gauge attached. Whenever I rev the engine, the number on the gauge of...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-13-2017, 09:18 PM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

Sorry, I actually tried both. I pulled the vacuum line and I use a vacuum pump to apply vacuum to the EGR. The engine does stumble a bit but it does not dies. I can see the diaphragm actually going...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-12-2017, 04:51 PM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

Car doesn't stall when I pulled the vacuum line from the EGR? It continues to run smooth. And yes egr is holding vacuum.
Forum: Honda CRX / EF Civic (1988 - 1991)
04-12-2017, 11:41 AM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Re: Failed Smog! Replaced CAT, O2 sensor, but NO too high

How do I test the egr solenoid? Which settings do I set the voltometer to? And what do I use to test the vacuum?
Forum: Honda CRX / EF Civic (1988 - 1991)
04-12-2017, 09:17 AM
Replies: 23
Views: 2,274
Posted By hmtcrxsir

Failed Smog! Replaced CAT, O2 sensor, but NO too high

Hello,

I have a 91 Honda Crx HF (D15B6). It is completely stock. Since I live in CA, I was required to smog the vehicle. It failed the first time for high NO number (max 812, but measured 886). So...
Forum: Honda CRX / EF Civic (1988 - 1991)
04-10-2017, 08:01 AM
Replies: 4
Views: 2,547
Posted By hmtcrxsir

Re: Confused about setting ignition timing on D15B6

Thank you. Just needed confirmation.
Showing results 1 to 25 of 445
 
Page 1 of 18
1
2
3
11
Last »


 
Forum Jump


All times are GMT -8. The time now is 05:51 AM.