Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 6
1
2
3
Last »
Search: Posts Made By: Gekko
Showing results 1 to 25 of 134
Search took 0.84 seconds.
Forum: Acura Integra
01-02-2017, 03:39 AM
Replies: 3
Views: 2,711
Posted By Gekko

Re: GSR Vibration and Pulsing RPM

Thanks for the advice. I have cleaned the IACV but my car doesn't have a FITV. I think replacing all the vacuum hoses like you mentioned would be the next step to address the fluctuating RPM.

As...
Forum: Acura Integra
12-10-2016, 06:58 AM
Replies: 3
Views: 2,711
Posted By Gekko

Re: GSR Vibration and Pulsing RPM

Update
I just did the exhaust leak test shown here and found a hairline crack in my exhaust header on cylinder #4. The previous owner put a Comptech header on the car and when I got it, there was no...
Forum: Acura Integra
12-09-2016, 12:33 PM
Replies: 3
Views: 2,711
Posted By Gekko

GSR Vibration and Pulsing RPM

I have a 1999 GSR with a terrible vibration right at 1500 RPM. If you sweep from 1000-2000 or back down, the dash shakes like crazy right at 1500 RPM. If I hold the throttle constant right in the...
Forum: Acura Integra
04-26-2016, 09:01 AM
Replies: 6
Views: 6,719
Posted By Gekko

Re: GSR Vacuum Leak at Intake Air Bypass (IAB) Spring / Shaft

When you took it apart to remove the butterflies, did you take the whole manifold off the head? I'm wondering if I have to take off the whole manifold to service this thing, or if I can disassemble...
Forum: Acura Integra
04-26-2016, 04:32 AM
Replies: 6
Views: 6,719
Posted By Gekko

Re: GSR Vacuum Leak at Intake Air Bypass (IAB) Spring / Shaft

Thanks for the reply. All the online Acura places I've checked show that the valve assembly is discontinued. I think 17129-P72-000 is the diaphragm and 17120 is the valve assembly, including...
Forum: Acura Integra
04-19-2016, 04:01 AM
Replies: 6
Views: 6,719
Posted By Gekko

GSR Vacuum Leak at Intake Air Bypass (IAB) Spring / Shaft

I suspected a vacuum leak in my 1999 GSR and did a smoke test. The test revealed a very noticeable leak coming from the area behind the spring attached to the IAB shaft.

Has anyone ever taken one...
Forum: For Sale
09-30-2015, 04:12 AM
Replies: 170
Views: 21,438
Posted By Gekko

Re: 1995 Integra GSR DB8 FULL PART OUT / ITR Wheels/ EVERYTHING MUST GO

Sorry to hear about the theft/wreck.
I'm interested in the fender liners, oem jack & tools, and the OEM 4x100 spare.
Also wondering if you have the splash guard that goes under the front bumper. I...
Forum: Acura Integra
03-28-2015, 05:18 AM
Replies: 5
Views: 1,406
Posted By Gekko

Re: Front Upper Arm Mount - ID this part, how to buy replacement?

Follow-up to my own post. I checked Skunk2's website and supposedly the Pro-Series Plus UCA is the same as the Pro-Series, but includes the upper mount and bushings.

I did find the Skunk2 upper...
Forum: Acura Integra
03-28-2015, 05:02 AM
Replies: 5
Views: 1,406
Posted By Gekko

Re: Front Upper Arm Mount - ID this part, how to buy replacement?

Thanks for the input everyone.

B_Swapped, you said that Skunk2 makes the mount but doesn't sell it separately. Do you mean the mount and bushings come with their upper control arms? I had Skunk2...
Forum: Acura Integra
03-27-2015, 05:32 PM
Replies: 5
Views: 1,406
Posted By Gekko

Front Upper Arm Mount - ID this part, how to buy replacement?

I recently bought a DB8 that has some random modifications from the previous owner. I noticed some play in the front upper control arm and tracked it to the mount shown in the picture. Does anyone...
Forum: For Sale
09-08-2014, 06:46 AM
Replies: 122
Views: 10,015
Posted By Gekko

Re: ACURA INTEGRA GSR PARTS AND OTHER PARTS CLEAN UP!!

PM sent.
Forum: Suspension & Brakes
02-27-2013, 08:28 AM
Replies: 1
Views: 2,154
Posted By Gekko

DA Integra Inner Tire Wear

I have what I would consider extreme inner tire wear for my moderately lowered DA Integra and wanted to get some opinions as to what could be causing it.

I lowered my car 2-3” on Koni/GC and had...
Forum: Acura Integra
08-29-2012, 10:38 AM
Replies: 14
Views: 1,062
Posted By Gekko

Re: 91 teggy rp needle acting up

It is usually the ignitor, which is inside the distributor. You can take off the cap and check the connections to it. I had a bouncing tachometer and one of the wires connecting to the ignitor was...
Forum: Acura Integra
07-13-2012, 05:15 AM
Replies: 25
Views: 2,544
Posted By Gekko

Re: recently bought DA rad fan diagnosis

The fan relay is under the passenger side of the dash to the left of the glove box. From what I remember you take off the passenger side kick panel and take out the glove box and you can get to it.
...
Forum: Acura Integra
07-12-2012, 05:29 AM
Replies: 5
Views: 9,582
Posted By Gekko

Re: What Wheels and Offset on Your DA?

I have 15x7.5 wheels with a 32 offset. Tires are 205-50-15. In my opinion the fitment is perfect, I'm dropped about 2 to 2.5 inches all around. I had to bend back the little lip on the inside of the...
Forum: Acura Integra
06-06-2012, 01:05 PM
Replies: 5
Views: 949
Posted By Gekko

Re: '90 GS, need junkyard parts

Your best bet is either your local Craigslist or the For Sale forum on g2ic.com.
Forum: Southeast (Sales)
02-17-2012, 05:50 AM
Replies: 2
Views: 609
Posted By Gekko

Re: (Chattanooga,TN) FS: 1997 Toyota Camry LE

My bad, we are asking $4000.
Forum: Southeast (Sales)
02-16-2012, 06:08 AM
Replies: 2
Views: 609
Posted By Gekko

(Chattanooga,TN) FS: 1997 Toyota Camry LE

4-Cylinder American Edition with all options. Car is clean inside and out and has ~204k miles. Non-smoker, lady driven, no children or pets, and loved by owner. No mechanical problems and has been a...
Forum: For Sale
11-09-2011, 12:06 PM
Replies: 1
Views: 314
Posted By Gekko

Re: honda stock & aftermarket parts

Interested in the LS ARP headstuds. Do you have all of the washers and nuts that go with them?
Forum: Suspension & Brakes
11-01-2011, 01:33 PM
Replies: 6
Views: 7,927
Posted By Gekko

Re: 92' eg Brake Bleeding

Definitely make sure they are properly bled like other posters suggested. If that doesn't do it I'd look into the MC. There is a chance that when bleeding the brakes you messed up the seals in the...
Forum: Acura Integra
10-01-2011, 05:50 AM
Replies: 1
Views: 25,125
Posted By Gekko

Re: 91 DA PCV valve to breather hose

In case someone comes across the same issue I thought I'd say how I resolved my problem.

I have a spare B18b engine from a newer Integra and realized the PCV system is essentially identical on it....
Forum: Acura Integra
09-30-2011, 09:45 AM
Replies: 1
Views: 25,125
Posted By Gekko

91 DA PCV valve to breather hose

I've got a 91 DA Integra and was trying to replace the PCV valve and of course it broke. I took off the breather chamber to get to the bottom parts of the PCV but ended up with a big mess of broken...
Forum: Southern California
09-08-2011, 10:20 AM
Replies: 5
Views: 1,200
Posted By Gekko

Re: 95 Accord Crank Pulley Tool

I found one locally at a Pep Boys, if you have those in CA. It was only like $25 or so. Otherwise, Amazon has them if you are not in a hurry.
Forum: Honda CRX / EF Civic (1988 - 1991)
09-08-2011, 05:11 AM
Replies: 59
Views: 21,891
Posted By Gekko

Re: How I eliminated wheel hop - front engine mount mod - CHEAP

Tyson, thanks for the writeup and the idea. I had my transmission out of my DA recently and decided to try this on the front mount while I had it out. It made a huge difference for a week or so but...
Forum: Acura Integra
09-07-2011, 01:38 PM
Replies: 33
Views: 5,538
Posted By Gekko

Re: My Half a$$ Grey to Black RIT Experience

Subscribing to see results. I dyed my tan carpet to black using a plastic kiddie pool and the liquid RIT dye. A little brown on some of the well worn parts now but still holding up after almost 8...
Showing results 1 to 25 of 134
 
Page 1 of 6
1
2
3
Last »


 
Forum Jump


All times are GMT -8. The time now is 01:10 PM.