Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 2
1
2
Search: Posts Made By: AngryTR0LL
Showing results 1 to 25 of 26
Search took 1.33 seconds.
Forum: Honda Accord (1990 - 2002)
08-17-2003, 07:27 AM
Replies: 7
Views: 518
Posted By AngryTR0LL

Re: accident, now i have vibrations (RKV)

A good place to start is your exhaust. It sounds like you tweaked it in the impact.
Look under your car and look for any signs of impact. Have a friend put it in gear and see if the pipes/mufflers...
Forum: Honda Accord (1990 - 2002)
08-16-2003, 08:16 PM
Replies: 7
Views: 518
Posted By AngryTR0LL

Re: accident, now i have vibrations (RKV)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RKV &raquo;</TD></TR><TR><TD CLASS="quote">ok guys, i've read over some past posts, im still kinda...
Forum: Honda Accord (1990 - 2002)
08-16-2003, 08:09 PM
Replies: 23
Views: 2,611
Posted By AngryTR0LL

Re: need to know how to get oil out of spark plug tubes...... (crxaddikt)

You'll need a spark tester. Try NAPA or PepBoys. It should only cost $10-$15.

One end of the spark tester looks like a spark plug. The other end will be an alligator clip or something similar that...
Forum: Honda Accord (1990 - 2002)
08-16-2003, 07:42 PM
Replies: 11
Views: 20,235
Posted By AngryTR0LL

Re: (aznchino16)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aznchino16 &raquo;</TD></TR><TR><TD CLASS="quote">have anyone changed the brake shoes for a 6th Gen? is...
Forum: Tech / Misc
08-16-2003, 01:35 PM
Replies: 26
Views: 1,364
Posted By AngryTR0LL

Re: Well....just found out I have a crack in my exhaust manifold... (slvrcivic97)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slvrcivic97 &raquo;</TD></TR><TR><TD CLASS="quote">Yeah, my crack is just like the one in the pic. The...
Forum: Honda Accord (1990 - 2002)
08-15-2003, 04:28 PM
Replies: 53
Views: 10,668
Posted By AngryTR0LL

Re: 1000 in./lbs. impact wrench enough to take off crank pulley? (david90)

Who rates a 1/2" impact in in/lbs? My cordless impact produces more torque than that...
Forum: Honda Accord (1990 - 2002)
08-15-2003, 04:25 PM
Replies: 18
Views: 738
Posted By AngryTR0LL

Re: burning oil (gooberwolf)

A couple of people already mentioned things to look for. Here's a couple more...

Check your PCV valve. Is it clogged? That's your first clue. Pull off the valve cover. Is there sludge builup? A...
Forum: Honda Accord (1990 - 2002)
08-15-2003, 04:09 PM
Replies: 23
Views: 2,611
Posted By AngryTR0LL

Re: need to know how to get oil out of spark plug tubes...... (crxaddikt)

Did you replace o-rings or did you replace the the round rubber seals that fit in the valve cover? If yoiu didn't replace the spark plug tube o-rings, your problem isn't fixed. You need to unbolt...
Forum: Honda Accord (1990 - 2002)
08-15-2003, 03:07 PM
Replies: 4
Views: 675
Posted By AngryTR0LL

Re: 96 Accord LX CEL code 90 (Shft@9GSR)

You have a P1456 (evap leak). A loose cap can set this code. It doesn't matter if it's not loose now. The light will not turn off by itself (well...eventually it will but it takes awhile). Do you...
Forum: Tech / Misc
08-14-2003, 07:56 PM
Replies: 55
Views: 4,970
Posted By AngryTR0LL

Re: (99_SH)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99_SH &raquo;</TD></TR><TR><TD CLASS="quote">What kinda aircompressor(how many CFM@90psi) are you guys...
Forum: Tech / Misc
08-08-2003, 03:05 PM
Replies: 22
Views: 758
Posted By AngryTR0LL

Re: That darn crank pulley bolt strikes again! (Daemione)

Really? I had know idea I was doing it wrong. I guess I just got lucky with last bazillion crank bolts I busted loose. Hmmmmm....
Forum: Honda Accord (1990 - 2002)
08-08-2003, 02:57 PM
Replies: 12
Views: 541
Posted By AngryTR0LL

Re: Loss of Drive while turning (fluxion)

Check the fluid level with the engine off. Use Honda ATF or the equivalent. There's a friction modifier in Honda's fluid...
Forum: Honda Accord (1990 - 2002)
08-08-2003, 02:55 PM
Replies: 2
Views: 491
Posted By AngryTR0LL

Re: 93 Accord Lx Cooling Fan Questions (93AccordLx)

The driver's side is the condensor fan. Try turning the A/C on. It should kick on ( it will kick on if the engine reaches a certain temp, too---&gt;overheats).
Forum: Honda Accord (1990 - 2002)
08-08-2003, 02:51 PM
Replies: 12
Views: 541
Posted By AngryTR0LL

Re: Loss of Drive while turning (fluxion)

Check the fluid level and condition. Is it low? Is it burnt? It sounds like you are a couple of liters low on fluid.
Forum: Honda Accord (1990 - 2002)
08-08-2003, 02:47 PM
Replies: 5
Views: 691
Posted By AngryTR0LL

Re: '98 L4 Brake shudder problems (GVSusAssy)

I wouldn't call it a weak link. The Accord pads are normally replaced between 40k and 60k miles (and up). If they were replaced at 20k, they were either replaced way to early or the previous owner...
Forum: Tech / Misc
08-07-2003, 03:01 PM
Replies: 22
Views: 758
Posted By AngryTR0LL

Re: That darn crank pulley bolt strikes again! (vultron)

Get the new IR titanium 1/2" impact wrench. It's rated for a 1000 ft/lb's and it's only $200. It hasn't failed me yet...
Forum: Tech / Misc
08-07-2003, 01:02 PM
Replies: 22
Views: 758
Posted By AngryTR0LL

Re: That darn crank pulley bolt strikes again! (vultron)

Throw the motor in the back of a truck and drive it to your local Honda dealer.
Beg and plead (tears might help) until they zap it off for you.
Forum: Tech / Misc
08-07-2003, 12:52 PM
Replies: 7
Views: 429
Posted By AngryTR0LL

Re: Please, Need Serious Help with setting Timming on SOHC 93 Civic... (Blaze45)

The machined surface for the valve cover gasket.


I will put a small straight edge (like a small file) on the surface of the head and line the hash mark on the cam with the straight edge. If you...
Forum: Tech / Misc
08-06-2003, 04:58 PM
Replies: 7
Views: 429
Posted By AngryTR0LL

Re: Please, Need Serious Help with setting Timming on SOHC 93 Civic... (Blaze45)

My memory is a little fuzzy but I think there are 3 hash marks on that cam gear.
You need to line up the two has marks that are 180 degrees apart (on the cam gear) with the top of the head.
Forum: Tech / Misc
08-05-2003, 06:29 PM
Replies: 4
Views: 455
Posted By AngryTR0LL

Re: Dist. Rotor replacement.... (Beave0101)

Some models you will need to remove the 8mm bolt and some models you don't (you just pull them off). It would help if you knew what you're driving and it would help even more if you could pass that...
Forum: Tech / Misc
08-05-2003, 06:19 PM
Replies: 11
Views: 9,428
Posted By AngryTR0LL

Re: Car jerks in first gear and sometimes in what ever gear while driving (ekhybrd)

Is it a misfire? Does it misfire under a load? Do you know what it feels like when an engine is misfiring because a faulty ignition component? Check your spark plugs, plug wires and rotor/cap.
Forum: Honda Accord (1990 - 2002)
08-05-2003, 06:02 PM
Replies: 25
Views: 1,004
Posted By AngryTR0LL

Re: New clutch time... questions (jokerstud)

I can knock out most front wheel drive clutches in about 2 hours. It's usually double for the Accord. If you've never pulled a tranny, you're looking at a day or two of hard labor. All of the bolts...
Forum: Tech / Misc
08-04-2003, 03:25 PM
Replies: 10
Views: 5,505
Posted By AngryTR0LL

Re: code p0133 (ramz7887)

A new computer from the dealer is a little over $800.00. Labor and tax will get you to about $1000.00. Keep in mind the new ECM will be an update to fix this problem. If you buy a used computer,...
Forum: Honda Accord (1990 - 2002)
08-03-2003, 06:32 PM
Replies: 25
Views: 1,004
Posted By AngryTR0LL

Re: New clutch time... questions (jokerstud)

Do you have a car lift? If you don't, I wouldn't try the installation yourself. I've installed a lot of clutches but I wouldn't do one at home (especially a '94 Accord).
If you want to save a little...
Forum: Honda Accord (1990 - 2002)
08-03-2003, 06:17 PM
Replies: 5
Views: 618
Posted By AngryTR0LL

Re: Studdering At Low RPM (Voom)

Unplug your EGR valve. If the miss goes away, your EGR ports are clogged. You'll need to remove 4 plugs from your intake and clean the plugged ports.

-Troll-
Showing results 1 to 25 of 26
 
Page 1 of 2
1
2


 
Forum Jump


All times are GMT -8. The time now is 09:01 AM.