Notices
 
Search: Posts Made By: subgeniusdude
Showing results 1 to 25 of 484
Search took 1.29 seconds.
11-30-2021, 11:30 AM
Replies: 19
Views: 2,977
Posted By subgeniusdude

Re: 99/00 SI rear sway bar

I finally got rid of the 13mm Integra sway bar and ghetto fabbed brackets with washers. Honestly never noticed a huge difference and getting the EM1 end links into those thick bar ends using whatever...
06-17-2021, 01:14 PM
Replies: 19
Views: 2,977
Posted By subgeniusdude

Re: 99/00 SI rear sway bar

Only the EM1 Si's came with a rear bar to my knowledge. Integra rear bar is 13mm hatchback and 14mm sedan. You can use the Integra brackets but one hole won't sit flush,you'll need a few washers...
05-01-2021, 03:17 PM
Replies: 2
Views: 766
Posted By subgeniusdude

Re: Wiring issue on my 98 Honda civic sedan

I know this is obvious and may sound silly,but mice can and will get into your car. I left mine at my brother's who lives in the country for a month and was surprised to see one had got in and eaten...
05-01-2021, 03:06 PM
Replies: 8
Views: 1,113
Posted By subgeniusdude

Re: D-Series Build - Too Many Options

Y7 block and Z6 head with the EX trans would be a good combo. I waited about 3 months for the Speedfactory rods and caught them on sale and have been happy with them. The Skunk2 Alpha ZC rods are a...
05-01-2021, 01:33 PM
Replies: 7,491
Views: 847,181
Posted By subgeniusdude

Re: Tell Us What You Did To Your EG/EK/Del Sol Today

Got around to mounting my intercooler today. After trying to bottom mount it with some brackets I had picked up from the hardware store,I just wasn't happy with how it looked plus it made putting the...
04-14-2021, 12:30 PM
Replies: 2
Views: 552
Posted By subgeniusdude

Re: 97 HB Starts without Pressing Down Clutch

Get a flashlight and look towards the top of the clutch pedal arm,there's a switch mounted up there that controls this. Could have come out of adjustment or the plastic plunger has broken....
04-12-2021, 08:47 AM
Replies: 27
Views: 17,730
Posted By subgeniusdude

Re: Turbo....or high compression

Properly building a D series for boost can be way more expensive than a complete B/K/H series swap. It all depends on what your plans are and your budget. Reliable daily driver? Weekend track car?...
04-09-2021, 11:32 AM
Replies: 15
Views: 1,406
Posted By subgeniusdude

Re: Low boost on stock y7??

James from Texas Honda Channel ran a similar setup for a while then swapped a manual in.
04-09-2021, 11:29 AM
Replies: 14
Views: 897
Posted By subgeniusdude

Re: Do you guys have coolant going to your TB or Intake manifold?

Simply run a hose from the water pipe nipple (above oil filter) to the nipple on the intake and you will bypass the IACV and throttle body. If you have surging/weird idle problems then most likely...
01-27-2021, 12:27 PM
Replies: 1
Views: 1,456
Posted By subgeniusdude

Re: Low oil pressure on warm idle, new build

I'd suspect those main clearances,if I'm not mistaken thats the service limit on them. Are you using the OEM Yamada oil pump ? You could also be losing some pressure by not having the pickup to pump...
01-27-2021, 12:12 PM
Replies: 9
Views: 1,845
Posted By subgeniusdude

Re: just bought a remote start for my 2000 civic EX 4door

This link should help you out
https://www.the12volt.com/installbay/alarmdetail/1054.html
01-26-2021, 03:23 PM
Replies: 0
Views: 767
Posted By subgeniusdude

ARP head studs in Y series block info

Thought I would post this as there's quite a bit of confusion as to how to properly install these studs. I won't go into preferences you can do it how it works for you,some say hand tight,some same...
10-06-2020, 07:08 AM
Replies: 12
Views: 9,251
Posted By subgeniusdude

Re: 2005 crv passenger side oil leak

VTEC solenoid gaskets are a common problem on these,I've replaced mine 3 times and it still leaks a little. I'd also suspect the front crank seal,I replaced mine after noticing oil that was slung up...
10-06-2020, 06:57 AM
Replies: 5
Views: 967
Posted By subgeniusdude

Re: 2002 CRV Radiator Fan Not Turning On

I just went through the same thing last week. Top off your coolant and let it run without the radiator cap on for about 15 minutes,this should be enough time to bleed any air out. Don't forget to...
09-24-2020, 12:26 PM
Replies: 7,491
Views: 847,181
Posted By subgeniusdude

Re: Tell Us What You Did To Your EG/EK/Del Sol Today

I greased the hell out of them including the bolts so they won't seize to the metal bushing,cutting them off is not fun ! Next project is fitting a 13mm rear anti roll bar from a 95 Integra onto the...
09-24-2020, 08:37 AM
Replies: 7,491
Views: 847,181
Posted By subgeniusdude

Re: Tell Us What You Did To Your EG/EK/Del Sol Today

Replaced the rear upper control arms (compensator arm) bushings with poly bushings. Drivers side rear bushing was seized so had to saw it off but passenger side came off easily. Can't really tell any...
09-23-2020, 06:29 AM
Replies: 5
Views: 2,033
Posted By subgeniusdude

Re: Any Middle TN Meets or Shows.?

Anyone going to the Import Alliance Fall Meet in Bowling Green KY on the 24/25 Oct?
09-10-2020, 08:40 PM
Replies: 1
Views: 494
Posted By subgeniusdude

Re: Anybody running B&G S2 lowering springs on an EK?

https://cimg1.ibsrv.net/gimg/honda-tech.com-vbulletin/2000x1504/img_20200910_152014_2efd7c1b9951ca88c622f1b0a20446832ab0de8c.jpg
Ended up trimming my bumpstops 30mm or about 1.25 inches and made a...
09-09-2020, 03:17 PM
Replies: 4
Views: 4,967
Posted By subgeniusdude

Re: Bouncy ride after Tein FlexZ install

Make sure you aren't adjusting the ride height with the lower spring perch,this is to set preload only. Ride height adjustment is done by rotating the shock body up or down. Alot of people adjust...
09-09-2020, 03:02 PM
Replies: 1
Views: 494
Posted By subgeniusdude

Anybody running B&G S2 lowering springs on an EK?

I installed B&G S2 springs on an EK sedan because I got a helluva deal on them and some of the Euro tuner crowd likes them. They advertise a 1.75 drop front and rear and are progressive. I installed...
09-09-2020, 02:51 PM
Replies: 3
Views: 596
Posted By subgeniusdude

Re: Overheat problem

No your engine will still get hot but you won't have any heat inside. You said your radiator and water pump and thermostat are new? I've had bad luck with non Honda thermostats, it's possible even...
09-09-2020, 06:53 AM
Replies: 3
Views: 596
Posted By subgeniusdude

Re: Overheat problem

May sound silly and obvious,but are your fans coming on ? Mine was getting hot at idle like at red lights, drive thrus ,etc but when it was moving it was fine and it turned out to be the radiator fan...
06-29-2020, 09:49 AM
Replies: 3
Views: 954
Posted By subgeniusdude

Re: D16y8 automatic intake manifold

Did you find the problem ?
04-24-2020, 08:52 AM
Replies: 5
Views: 2,033
Posted By subgeniusdude

Re: Any Middle TN Meets or Shows.?

Middle TN here too. Murfreesboro would be a good spot to meet, just organize something and see who shows up,maybe post it on other forums etc I'd be down to go .
04-24-2020, 08:46 AM
Replies: 10
Views: 3,577
Posted By subgeniusdude

Re: any tennessee meets

Middle TN here,was wondering this myself. Used to be meets like every Saturday in Nashville either at Nissan Stadium or the pedestrian bridge and also at 100 Oaks Mall. Sad that the import scene has...
Showing results 1 to 25 of 484
 


 
Forum Jump


All times are GMT -8. The time now is 05:37 PM.