Notices
 
Search: Posts Made By: vrrodri
Showing results 1 to 25 of 487
Search took 1.29 seconds.
04-23-2020, 10:03 AM
Replies: 1
Views: 293
Posted By vrrodri

2019 CRV fails to start

About to take to dealership to help mom out and was wondering if this is a common issue. Will not start and after a couple of hours it does. Its got like 10k miles
08-22-2018, 06:22 AM
Replies: 5
Views: 1,166
Posted By vrrodri

Re: Vibration @ idle and while accelerating?

Also, pull engine codes and see if there is a 02 sensor issue as that sensor can cause vibration issues when it goes bad. Even if your engine light is not on check for codes.
08-22-2018, 05:03 AM
Replies: 5
Views: 1,166
Posted By vrrodri

Re: Vibration @ idle and while accelerating?

Some have reported that tightening the engine mounts following a specified sequence has helped. Also, have you checked your ignition coils and fuel system to ensure you are running on all...
08-20-2018, 07:06 AM
Replies: 6
Views: 1,323
Posted By vrrodri

Re: mysterious idle

Ok so I replaced the by-pass thermal valve and the up and down idle is gone! There is now a slight uptick in idle at stoplights that lasts a couple of seconds at around 1100 RPMs then quickly settles...
08-17-2018, 03:23 AM
Replies: 6
Views: 1,323
Posted By vrrodri

Re: mysterious idle

Well, it seems to be the thermal by pass valve allowing too much air, I did the vacuum tests and it failed. I ordered a new one. Now my cruise control stopped working!
07-25-2018, 08:20 AM
Replies: 6
Views: 1,323
Posted By vrrodri

07-24-2018, 06:50 AM
Replies: 6
Views: 1,323
Posted By vrrodri

mysterious idle

So my ep3 all stock with 197000 miles and running strong has a strange idle issue. First thing in the morning it has a high idle around 2k rpms. Once hot, at stop lights idle goes to 1200 to 1500...
05-23-2018, 03:27 AM
Replies: 1
Views: 701
Posted By vrrodri

Ep3 clutch case question

I got a new EP3 clutch case from Honda to replace the original case in my 2004 EP3. Everything else from the original 2004 EP3 case was transferred to the new case. Nothing else was swapped. Is...
01-31-2018, 04:47 AM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

Thanks. I have the Honda FSM--gotta find where I put it after last major service a while ago and see how much detail it goes into for the tranny
01-30-2018, 04:03 AM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

After some thought I think is best not to let them handle it further. He was quite upset and accused me of trying to get him to fix something that was already malfunctioning...he refused to take...
01-29-2018, 07:33 AM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

So I convinced him to drop the tranny and take a look-he swears is the pressure plate but will crack it open and have me come over to see it. What should I look for? Anyone has diagram or a photo of...
01-26-2018, 03:54 AM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

I found a broken torsion bar link, of course they did not break it...I will replace the links as a set and see if that makes any difference as far as vibrations but I do not expect it will. I am at...
01-24-2018, 05:09 PM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

I suspect not shimming it is why I am having rough gear shifts and hard to shift onto first gear at times even though both clutch cylinders are new now.
01-24-2018, 02:50 PM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

so if I see this correctly, without shims there is excess play transmitted to the main shaft and that in turns can make the pressure plate vibrate/shake? Is the shim for the case under the...
01-24-2018, 01:17 PM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

I asked mechanic again and he said all they did was transfer internals as a whole from one case to another (driver side case) and the issue is pressure plate. So either he is lying or they damaged...
01-22-2018, 04:11 PM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

I went to the shop and showed him what was happening. He said the issue was the pressure plate failing. I told him the pressure plate was replaced last October at his shop when they installed a new...
01-21-2018, 05:14 PM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

Do you happen to have a link or more info on the shims so I can look before I call the mechanic?
01-21-2018, 05:06 PM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

Thanks, I did not know about that!
01-21-2018, 08:37 AM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

Update: Master and slave clutch cylinders replaced. Got car back, still there is vibration. I adjusted the clutch pedal quite a bit and the grinding seems to have subsided. However, I still feel new...
12-28-2017, 06:39 AM
12-28-2017, 06:37 AM
Replies: 32
Views: 5,989
Posted By vrrodri

Re: FS/FT 2001 Honda Prelude 33k summer car

You are selling a Prelude right? Other cars will have different values obviously. Good to see you are comparing and looking at blue book values.
12-27-2017, 09:35 AM
Replies: 32
Views: 5,989
Posted By vrrodri

12-27-2017, 09:16 AM
Replies: 32
Views: 5,989
Posted By vrrodri

Re: FS/FT 2001 Honda Prelude 33k summer car

KBB.COM is widely used by private sellers and dealers, as well as the NADA guide check it out
12-27-2017, 08:52 AM
Replies: 32
Views: 5,989
Posted By vrrodri

Re: FS/FT 2001 Honda Prelude 33k summer car

What did you base the asking price on? KBB value for that car in outstanding condition (3% of cars in this condition) with 33,500 miles is around $6400 (private sale) in Texas.
12-21-2017, 09:30 AM
Replies: 21
Views: 1,883
Posted By vrrodri

Re: 2004 civic ep3 transmision nightmare

Update: I confirmed the 3000 RPMs at 60 mph is correct--I had not driven the car for a while. Mechanic took car back to shop couple days after first repair and so far I hear crickets which makes me...
Showing results 1 to 25 of 487
 


 
Forum Jump


All times are GMT -8. The time now is 01:03 AM.