Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 2
1
2
Search: Posts Made By: IntegraGSR2000
Showing results 1 to 25 of 33
Search took 1.01 seconds.
Forum: Acura Integra
08-28-2002, 02:34 AM
Replies: 13
Views: 737
Posted By IntegraGSR2000

Re: OK took me 6.5 hrs to.... (integrx)

Umm...it's not a race dude. Doing things fast is not nearly as important as doing things right. Take your time and you'll find you do a better job. But then again what the hell do I know? I bet you...
Forum: Honda / Acura
08-28-2002, 02:10 AM
Replies: 54
Views: 2,478
Posted By IntegraGSR2000

Re: 94-01 Integra OEM Kit (dlplayboy)

Got mine from the dealer when I bought my car back in 2000. I love the way it looks...so clean! They are hard to find but just keep calling every dealer in the counrty if you have to. I know they're...
Forum: Acura Integra
08-05-2002, 09:27 PM
Replies: 5
Views: 504
Posted By IntegraGSR2000

Re: Checked Plugs Yesterday and....... (94goldjungsr)

sorry to sound like a prick but...get your ass to a dyno. They will be able to measure your air/fuel ratio and adjust it accordingly if you have a FPR or better yet a VAFC. Trust me dude, it take a...
Forum: Acura Integra
08-05-2002, 09:24 PM
Replies: 9
Views: 396
Posted By IntegraGSR2000

Re: aem or comptech? (samagon)

I've had both. I prefer the AEM. Sounds better, looks better, and performs about the same.
Forum: Acura Integra
07-13-2002, 11:22 PM
Replies: 5
Views: 423
Posted By IntegraGSR2000

Apex V-AFC...cheapest place to buy?

What is the cheapest place to hook up with an Apex V-AFC?
Forum: Acura Integra
07-13-2002, 11:16 PM
Replies: 8
Views: 368
Posted By IntegraGSR2000

suspension help please

Right now I have comptech sport springs 1.3" drop (front and rear), and I'm running stock struts. I also have a neuspeed 4 point front strut bar.

Right now I think my car handles like crap. I...
Forum: Acura Integra
07-13-2002, 10:59 PM
Replies: 8
Views: 631
Posted By IntegraGSR2000

Re: anyone put on an oil pressure gauge? (carl_aka_carlos)

What an idiot! Sorry to hear that dude... Next time do it yourself and spare yourself the headache.

When it snapped did oil blow the hell all over or what?
Forum: Honda / Acura
07-03-2002, 04:00 AM
Replies: 0
Views: 239
Posted By IntegraGSR2000

HottWirez

Does anyone have any exp with HottWirez? I'm going to order some and had a couple questions for those of you that may have them.
Forum: Acura Integra
06-24-2002, 03:02 PM
Replies: 1
Views: 424
Posted By IntegraGSR2000

ECU throwing code 1...what's wrong?

I know a code 1 means oxygen content, but I don't what is causing the error. I always use 92 octane.

The first time I got the CEL was about a week after dyno tuning. I was just cruising along in...
Forum: Acura Integra
05-09-2002, 12:24 AM
Replies: 5
Views: 402
Posted By IntegraGSR2000

Re: Where can I get Pillar Guage Pods in the grey color of the pillar???? (dariusz)

Inlinefour.com can order them. I got mine about a month ago from them. I only waited 2+ months for it..hehe Looks sweet ass tho, worth the wait!


[Modified by IntegraGSR2000, 9:27 AM 5/9/2002]
Forum: Acura Integra
04-21-2002, 01:05 PM
Replies: 0
Views: 327
Posted By IntegraGSR2000

Engine timing help please!

to anyone that may be able to help me...

I'm having trouble getting the marks on my cam gears to allign when the crank is on the piston #1 TDC mark. I've tried this process 4 times and still...
Forum: Acura Integra
02-21-2002, 09:17 AM
Replies: 11
Views: 9,903
Posted By IntegraGSR2000

Re: Skunk2 cam gears install help (Fooser)

Allow me to explain again. I lined up the cam gears perfectly with the mark on the plastic shroud behind the cam gears. I then set the crank at piston #1 TDC. I loosened the tensioner bolt, slipped...
Forum: Acura Integra
02-21-2002, 07:31 AM
Replies: 11
Views: 9,903
Posted By IntegraGSR2000

Skunk2 cam gears install help

ok, I set the crank at TDC. I lined up the cam gears perfectly with the timing mark on the plastic shroud and checked them with a ruler. I installed the timing belt. I turned the engine one complete...
Forum: Acura Integra
02-15-2002, 06:31 PM
Replies: 10
Views: 631
Posted By IntegraGSR2000

Re: how much for a port and polish job? (MaliceGSR)

I had my head ported and polished at PortFlow last month and let me assure you they are not a lil' po-dunk shop. They do ask what you've done and where you're going with your engine and they do...
Forum: Acura Integra
02-11-2002, 12:50 PM
Replies: 6
Views: 409
Posted By IntegraGSR2000

Re: 2000 GSRs with spunk2 IM? (stick)

If the 99SI TB gasket doesn't have a hole for the IAC you're in a world of hurt. You should just get a new GSR TB gasket, honda bond it to the IM, and use a knife or dremel to match the opening...
Forum: Acura Integra
02-08-2002, 09:39 AM
Replies: 0
Views: 245
Posted By IntegraGSR2000

sensor question

What are the two screw in sensors on the right side fo the head by the VTEC Solonoid (spelling)? One has a two wire connector and the other has a one wire connector. Thanks guys...
Forum: Acura Integra
02-07-2002, 11:42 AM
Replies: 3
Views: 279
Posted By IntegraGSR2000

Need help with fittings

Where would I buy BSPT T fittings and NPT to BSPT adaptors and nylon hose for installing an Electrical Oil pressure guage in my GSR. Would I have better luck going all NPT instead of BSPT? I do need...
Forum: Acura Integra
02-07-2002, 05:55 AM
Replies: 3
Views: 528
Posted By IntegraGSR2000

Re: Skunk2 Intake Manifold Question (GSR_Hacker)

hmm...what to plug it with...? Vacume line plug? What did you plug yours with? Ohh and thanks for all the pics, they were very helpfull!!!


[Modified by IntegraGSR2000, 2:56 PM 2/7/2002]
Forum: Acura Integra
02-06-2002, 12:48 PM
Replies: 3
Views: 528
Posted By IntegraGSR2000

Re: Skunk2 Intake Manifold Question (IntegraGSR2000)

somebody must know...
Forum: Acura Integra
02-06-2002, 10:00 AM
Replies: 3
Views: 528
Posted By IntegraGSR2000

Skunk2 Intake Manifold Question

ok, I got my Skunk2 IM but what is the deal with the 'Y' inlet fitting on the head flange? My GSR IM has a colant inlet there but it isn't a 'Y' fitting. Should I just plug that smaller hole in that...
Forum: Acura Integra
01-29-2002, 09:00 PM
Replies: 3
Views: 728
Posted By IntegraGSR2000

Re: VAFC wiring (Big Teggie)

Big Teggie,

I thought it did matter because the pinouts are different on the P28 compared with my stock ECU. Unless you're saying I use the new harness in conjuction (daisy chained) with my stock...
Forum: Acura Integra
01-29-2002, 07:28 PM
Replies: 3
Views: 728
Posted By IntegraGSR2000

VAFC wiring (stupid question)

I'm converting to a reprogramed P28 (92-95 Civic EX/SI). Should I use the ECU wiring diagram for the 25-95 Civic or should I use the diagram for the 00+ Integra GSR. Any help is greatly appreciated!...
Forum: Acura Integra
01-28-2002, 12:42 PM
Replies: 0
Views: 299
Posted By IntegraGSR2000

Greddy e-Manage piggy back?

A few questions for anyone who may know... Is this the cure for OBD2 vehicles (the Holy Grail)

1) In what increments is the VTEC changeover adjustable?
2) Does the eManage have an adjustable rev...
Forum: Tech / Misc
01-18-2002, 06:14 AM
Replies: 7
Views: 1,390
Posted By IntegraGSR2000

Re: Bypass of coolant to Throttle Body (Mista Bone)

Thanks for the replies guys. I guess I'll hold off on doing this if there are no gains from it. Anyone have any idea on my EVAP question.
Forum: Tech / Misc
01-17-2002, 05:56 AM
Replies: 7
Views: 1,390
Posted By IntegraGSR2000

Bypass of coolant to Throttle Body

I'm installing a Skunk2 IM and had a couple of ideas I wanted to run by everyone...

I was wondering if I could bypass the coolant fittings that run to my throttle body. I believe they are for the...
Showing results 1 to 25 of 33
 
Page 1 of 2
1
2


 
Forum Jump


All times are GMT -8. The time now is 06:52 AM.