Notices
 
Search: Posts Made By: fastbrakes
Showing results 1 to 25 of 499
Search took 1.50 seconds.
03-17-2006, 05:10 PM
Replies: 17
Views: 1,644
Posted By fastbrakes

Re: Wilwood Brake Kit ???? (Evil_Ek)

There are a few 15" wheels that will clear the 12.2" set up if you get a lower offset. Team Dynamics Pro Race 1 15x7 will work.
03-17-2006, 05:06 PM
Replies: 10
Views: 461
Posted By fastbrakes

Re: Disc swap from 90-93 Inetgra to a 92-95 hatchback. Breaks suck... (dem0nk1d)

The 90-93 Integra trailing arm might have a slightly different offset compared to the 94 up Integra. That's probably why the wheel has been pushed out. It could also mean the trailing arms are...
03-17-2006, 04:59 PM
Replies: 12
Views: 496
Posted By fastbrakes

Re: EK rear disc conversion question. (Nsane1)

Actually you don't need to change the prop valve. The difference if any between the drum and rear disc prop valves is not enough to warrant spending $ on them. In fact Honda used the same valve for...
03-11-2006, 10:25 AM
Replies: 0
Views: 322
Posted By fastbrakes

Anyone interested in rear 4 piston brake conversion pakage...

I've been asked several times over the past few months to develop a rear 4 piston conversion while retaining the factory drum parking brake. I have finally figured out how to do it and would like...
10-06-2005, 07:49 PM
Replies: 15
Views: 961
Posted By fastbrakes

Re: Turbo-Super Charged??? (BigBlock)

Well I guess the guys who turbo-supercharged the aircraft engines during WWII and were able to get close to 400 mph with them didn't know it was a bad idea...
09-23-2005, 10:13 AM
Replies: 0
Views: 261
Posted By fastbrakes

FS: 1993 Civic VX HB w/K24 swap, $8000 OBO

1993 Civic VX HB VIN 2HGEH2372PH537060, salvage theft title
car bought from Hasport
AZ car, no rust

Car is in Phoenix, Arizona

Approx 110K miles on body
Engine approx 20K

Engine is from a...
07-25-2005, 01:24 PM
Replies: 22
Views: 563
Posted By fastbrakes

Re: (cheezthis)

The Corrado rotors won't fit the Integra hubs due to the smaller ID of the hat section. The Corrado is 22mm thick and the Prelude VTEC/ITR are 23mm.

IF anyone has ITR rotors they redrill to the...
02-20-2005, 02:05 PM
Replies: 7
Views: 2,734
Posted By fastbrakes

Re: (tyflip2)

I'd like to know too as I have the TypeS head sitting here...Brian G at Hasport said something about needing to change to pistons too...need to get more info from him.

BTW I think it was Eagle who...
02-20-2005, 01:55 PM
Replies: 8
Views: 3,394
Posted By fastbrakes

Re: K24 (TSX) motor in my 95 hatch. (HondaTek)

I have the K24 from an 03 Accord in my EG, with the base RSX trans. It puts down 160 hp and 160 tq to the wheels with only a header and junk intake. The K-Pro tuning has something to do with it too....
02-20-2005, 01:44 PM
Replies: 17
Views: 383
Posted By fastbrakes

Dragging the K24 EG...

Finally got to the track with the EG after driving it around for the past 4 months. I've put about 4K miles on it or so and love every mile.

Anyway, made 9 runs on a Friday night in about 2 hours....
02-20-2005, 01:33 PM
Replies: 6
Views: 464
Posted By fastbrakes

Big Brake kit wheel fitment...

I have had a few people ask if the 12.2" kit made by Wilwood will clear a 15" wheel and finally was able to test fit one to the Pro Race 1 in 15 x 7 with +40 offset. The caliper will clear the wheel...
02-20-2005, 01:29 PM
Replies: 45
Views: 988
Posted By fastbrakes

Re: Golden Eagle Oil Pan - need your input!!!! (GoldenEagleMfg.com)

One thing I found out the hard way is the placement of the extra side of the pan for the increase in capacity. I had a pan welded up and it turns out the 'kick out' wouldn't clear the fixed bearing...
10-21-2004, 05:03 AM
Replies: 57
Views: 17,221
Posted By fastbrakes

Re: (rochesterricer)

I've got a pic of the shifter but don't know how to post it here...

As for the cost of the swap,

Engine with AC, alternator, $1200
trans (RSX) $650
Quaife w/install $1000
Hondata ECU $800?...
10-16-2004, 09:10 AM
Replies: 57
Views: 17,221
Posted By fastbrakes

Re: (rochesterricer)

I figured with the light weight of the car the stock RSX trans would be good enough, and the Si trans is still in short supply. Honestly if you found a complete setup from an Accord 5 speed it would...
10-16-2004, 08:59 AM
Replies: 29
Views: 7,327
Posted By fastbrakes

Re: (K@man)

Why don't you put it up under the radio like I did with mine, similar to the new Si? I love the way my hand can move almost side to side from the wheel to the shift lever, seems more natural now than...
Forum: For Sale
10-08-2004, 08:28 PM
Replies: 2
Views: 233
Posted By fastbrakes

FS: 5Zigen axle back...

I've got a 5Zigen muffler from the exhaust system that was installed on my K24 EG swap. This is the muffler with pipe that attaches to the 60mm cat back piping...I don't really know what model it is...
10-08-2004, 08:16 PM
Replies: 57
Views: 17,221
Posted By fastbrakes

Re: (95dxhatch)

I should start driving it around this weekend as I've got the a/c finally figured out...just need to charge it up.

I actually took the old brackets off a wrecked EG that hold the a/c condensor in...
09-23-2004, 07:36 PM
Replies: 6
Views: 372
Posted By fastbrakes

Re: A/C on K-series hybrid (Nikos)

It took me about 2 weeks to get all the lines made up the way I wanted them. I had to use some of the stock EG parts and some of the 03 Acord parts. Cost was about $235 for all the lines and another...
09-23-2004, 07:22 PM
Replies: 2
Views: 300
Posted By fastbrakes

Re: EX/GSR brakes on eg hatch question (jmayhew)

The EX caliper body is the same as the Integra (all 3G Tegs except ITR use the same brakes), so the only difference is the bracket that holds the pads. Honda in it's infinite wisdom chose to put a...
09-23-2004, 07:18 PM
Replies: 57
Views: 17,221
Posted By fastbrakes

Re: Initial impressions from my EG K24 swap... (rochesterricer)

Yes the new Quaife steering rack, should be here any day....
09-23-2004, 07:15 PM
Replies: 57
Views: 17,221
Posted By fastbrakes

Re: Initial impressions from my EG K24 swap... (nickzed20)

I have the EG Del Sol 2 core aftermarket radiator in there, and temp so far has stayed below 1/2, although I don't have the air hooked up yet. I don't think that will place any more load on the...
09-22-2004, 08:26 PM
Replies: 57
Views: 17,221
Posted By fastbrakes

Re: Initial impressions from my EG K24 swap... (93H22ACX)

With the generic intake, 5zigen exhaust (don't know which one, it's pretty quiet), hi flow cat, and the protoype Hasport header, it puts down 158 HP and 155 torque to the wheels.

Once I get the...
Showing results 1 to 25 of 499
 


 
Forum Jump


All times are GMT -8. The time now is 07:53 AM.