Turbo Partout
01-16-2013, 10:29 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2010
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Partout
Have this posted on a different forum, I will share it here, please note me here if you want something. I will just copy and paste it below.
((((Hi Everybody
I am not parting out because there is anything wrong with the car. It actually just went past 9000miles and it drives like a champ. I am not going to lie and say I haven been beating the **** out of it, because I have and why I built it. The car is not for sale, its only part out, after I spent so much time on it and money, I don't want to sell it to an idiot only for it to blow up the next day, always the same story.
I love this car, it has brought many years of pain and joy, I am only getting rid of it because I want an American car. I know it sounds silly but I just really do, I want a rwd drive one, with a turbo..stock.. and convertible...
I will use the funds to purchase one and post the build thread here
and also pay someone here.
I will try and stay true to my crack head prices as my previous for sale post, buit it will not be a charity
Al right to the parts, there is a lot of them obviously, I will post as much as I can just ask for anything that is not listed.
Garrett T04e turbo $300
(I love this thing, like I LOVE THIS THING,) its rebuilt with a ronsturboservice rebuilt kit, has ~8000, has had a bit of play since the rebuild but its works awesome.
Edelbrock IM with 68mm Throttle body $240
(the mod that made the biggest difference to how the car actually drove)
Precision 650cc high impedance injectors $130
Xenocron 255 pump, $35
GM 3Bar from Xenocron with clips $30 sold
NGK wideband $200
Aem Fuel rail, silver $60
Tial 38mm Wastegate $140
Lovefab replica top mount $60 sold
Hondata S300 with boost options on a p28 $480
EDIT
I forgot to mention to cover shipping, my zip is 01902 most of these things dont fit in a flat rate box so please check.
DC sports top tie bar $35
RFL BOV $50
AUTOMETER oil pressure gauge, $45
(just paid 45 for a new sending unit I never used)
Z6 distributor with Ignitor with 9k $50
Z6 Wiring Harness, has map sensor cut and IAT $50
Bag of heroin $12
BWR Black rear Camber kit $50
ENgine block
The third time the engine was built I had it balanced so I would prefer for the complete engine to be sold as one for a crack head price
Vitara 75.5 and eagle rods....10.5 xtd flywheel I will include the clutch aswell. Its a stage 3, (remove it and check for wear I been beating the **** out of it) Good oil pressure, 65+ psi at 3k rpm with straight 40. (Use 5w30 in winter otherwise oil pressure to high for turbo, straight 40 or higher in summer. I have tried every version of mutiweight in the summer, it does not work, a day of racing breaks the ones I have tried down) New crank turned 10 with bearings, 6k miles
AGAIN its balanced so i would say it has to stay together. ALSO the head and block have been shaved, don't remember by how much but it makes decent torque. Also has a topline oil pump I bought from FJT before he went out of business.
The bad, I reused a girdle a machine shop grinded down by a blind person. Its been in there for 9k no problems, and I am positive it wont pose a problem. The other machine shop said it would be fine so I took their word. Also has arp rod bolts and arp Headstuds. Felpro Headgasket (say what you want about felpro but they make AWESOME STUFF)
For the price, (IT PAINS ME TO DO IT,
my soul hurts) $1200, includes the head (hot tanked, shaved, new seals, DO A VALVE ADJUSTMENT) also has an aem true time gear. Comes with BNIB waterpump and tensione, BNIB slave cylinder. Will throw in transmission for free. If anybody wants to pick it up great, if you want it shipped, you set it up. Try Uship ( I took care of this motor, please do the same. These built engines are not install it and forget about it, like you would a rotary check it often)
PINK BWR LCA, these are the billet ones, $120
PINK Brace $100
KYB rear shocks, $90
These have about 5k on them, the coil overs are at least 10 years old, I will just throw them away.
CX Radiator $40
I believe I have a set of Tein Lowering springs 2 inch drop I can put on here if anybody wants springs. The font shocks have a local buyer.
I will setup a photobucket gallery of the interior and other parts
(sorry if this is hard to read, did this on a touchscreen tablet) )))))
((((Hi Everybody
I am not parting out because there is anything wrong with the car. It actually just went past 9000miles and it drives like a champ. I am not going to lie and say I haven been beating the **** out of it, because I have and why I built it. The car is not for sale, its only part out, after I spent so much time on it and money, I don't want to sell it to an idiot only for it to blow up the next day, always the same story.
I love this car, it has brought many years of pain and joy, I am only getting rid of it because I want an American car. I know it sounds silly but I just really do, I want a rwd drive one, with a turbo..stock.. and convertible...
I will use the funds to purchase one and post the build thread here
and also pay someone here.I will try and stay true to my crack head prices as my previous for sale post, buit it will not be a charity
Al right to the parts, there is a lot of them obviously, I will post as much as I can just ask for anything that is not listed.
Garrett T04e turbo $300
(I love this thing, like I LOVE THIS THING,) its rebuilt with a ronsturboservice rebuilt kit, has ~8000, has had a bit of play since the rebuild but its works awesome.
Edelbrock IM with 68mm Throttle body $240
(the mod that made the biggest difference to how the car actually drove)
Precision 650cc high impedance injectors $130
Xenocron 255 pump, $35
GM 3Bar from Xenocron with clips $30 sold
NGK wideband $200
Aem Fuel rail, silver $60
Tial 38mm Wastegate $140
Lovefab replica top mount $60 sold
Hondata S300 with boost options on a p28 $480
EDIT
I forgot to mention to cover shipping, my zip is 01902 most of these things dont fit in a flat rate box so please check.
DC sports top tie bar $35
RFL BOV $50
AUTOMETER oil pressure gauge, $45
(just paid 45 for a new sending unit I never used)
Z6 distributor with Ignitor with 9k $50
Z6 Wiring Harness, has map sensor cut and IAT $50
Bag of heroin $12
BWR Black rear Camber kit $50
ENgine block
The third time the engine was built I had it balanced so I would prefer for the complete engine to be sold as one for a crack head price
Vitara 75.5 and eagle rods....10.5 xtd flywheel I will include the clutch aswell. Its a stage 3, (remove it and check for wear I been beating the **** out of it) Good oil pressure, 65+ psi at 3k rpm with straight 40. (Use 5w30 in winter otherwise oil pressure to high for turbo, straight 40 or higher in summer. I have tried every version of mutiweight in the summer, it does not work, a day of racing breaks the ones I have tried down) New crank turned 10 with bearings, 6k miles
AGAIN its balanced so i would say it has to stay together. ALSO the head and block have been shaved, don't remember by how much but it makes decent torque. Also has a topline oil pump I bought from FJT before he went out of business.
The bad, I reused a girdle a machine shop grinded down by a blind person. Its been in there for 9k no problems, and I am positive it wont pose a problem. The other machine shop said it would be fine so I took their word. Also has arp rod bolts and arp Headstuds. Felpro Headgasket (say what you want about felpro but they make AWESOME STUFF)
For the price, (IT PAINS ME TO DO IT,
my soul hurts) $1200, includes the head (hot tanked, shaved, new seals, DO A VALVE ADJUSTMENT) also has an aem true time gear. Comes with BNIB waterpump and tensione, BNIB slave cylinder. Will throw in transmission for free. If anybody wants to pick it up great, if you want it shipped, you set it up. Try Uship ( I took care of this motor, please do the same. These built engines are not install it and forget about it, like you would a rotary check it often)PINK BWR LCA, these are the billet ones, $120
PINK Brace $100
KYB rear shocks, $90
These have about 5k on them, the coil overs are at least 10 years old, I will just throw them away.
CX Radiator $40
I believe I have a set of Tein Lowering springs 2 inch drop I can put on here if anybody wants springs. The font shocks have a local buyer.
I will setup a photobucket gallery of the interior and other parts
(sorry if this is hard to read, did this on a touchscreen tablet) )))))
Last edited by cevax; 01-20-2013 at 07:47 AM.
Trending Topics
08-28-2013, 02:40 PM
#14
Honda-Tech Member
Join Date: Sep 2002
Location: Little Rock, AR
Posts: 1,856
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post