JDM B16A(CTR pistons), Wilwood Brakes, P2t, P30, Valve Guides, Header, Hawk Pads, VAFC2 w/harness
06-25-2008, 04:32 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
JDM B16A(CTR pistons), Wilwood Brakes, P2t, P30, Valve Guides, Header, Hawk Pads, VAFC2 w/harness
All items are located 1 hour north of San Francisco at a friend's shop, pricing does not include shipping if applicable.
CLICK on the pictures for larger, higher resolution versions.
VAFC2 + OBD2a harness('99-00 Civic Si) - $200
P2T ECU - $140
P30 ECU - "chipped", B16A w/CTR Pistons program - $240
Valve Guides + Valve Stem seals, Intake + Exhaust - $100
Wilwood Big Brake Kit - $600
12.2" rotors, Forged Calipers, includes Stainless Steel lines and all hardware. Requires at least 16" rims.
Following brake pads included:
1 set poly matrix pads - new
1 set Cobalt Spec-B pads - new
1 set Cobalt XR-3 pads - used
Hawk Blue pads, HB113E.590 - $50
Fits:
1990 - 1991 Civic Wagon 4WD Models w/ Rear Drum Brakes
1990 – 1991 CRX Si - 1.6L Models w/ Rear Disc Brakes
1990 - Prelude S Models
B16A JDM Short Block. - $600
Less then 3 hours run time, mostly all dyno time.
All parts are new from Honda: Bearings, rods, & mains, gaskets, Oil Pump, Water Pump, CTR pistons(PCT-milled to fit rods), rings. ARP Rod Bolts.
Also includes; Oil Pan(no dents), mount bolts, crankcase vent block, pressure sensor, Timing gear, crank bolt, etc.
Made 185 WHP with a ported B16 head, revs to 9,500 RPM.
Rear Trailing Arms, 2000 Civic Si used - $120
Not shown:
Comptech 4-2-1 B16/17 header, CARB legal. Donut gasket, NO DENTS, some oil stains. $200
CLICK on the pictures for larger, higher resolution versions.
VAFC2 + OBD2a harness('99-00 Civic Si) - $200
P2T ECU - $140
P30 ECU - "chipped", B16A w/CTR Pistons program - $240
Valve Guides + Valve Stem seals, Intake + Exhaust - $100
Wilwood Big Brake Kit - $600
12.2" rotors, Forged Calipers, includes Stainless Steel lines and all hardware. Requires at least 16" rims.
Following brake pads included:
1 set poly matrix pads - new
1 set Cobalt Spec-B pads - new
1 set Cobalt XR-3 pads - used
Hawk Blue pads, HB113E.590 - $50
Fits:
1990 - 1991 Civic Wagon 4WD Models w/ Rear Drum Brakes
1990 – 1991 CRX Si - 1.6L Models w/ Rear Disc Brakes
1990 - Prelude S Models
B16A JDM Short Block. - $600
Less then 3 hours run time, mostly all dyno time.
All parts are new from Honda: Bearings, rods, & mains, gaskets, Oil Pump, Water Pump, CTR pistons(PCT-milled to fit rods), rings. ARP Rod Bolts.
Also includes; Oil Pan(no dents), mount bolts, crankcase vent block, pressure sensor, Timing gear, crank bolt, etc.
Made 185 WHP with a ported B16 head, revs to 9,500 RPM.
Rear Trailing Arms, 2000 Civic Si used - $120
Not shown:
Comptech 4-2-1 B16/17 header, CARB legal. Donut gasket, NO DENTS, some oil stains. $200
06-27-2008, 08:48 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM B16A(CTR pistons), Wilwood Brakes, P2t, P30, Valve Guides, Header, Hawk Pads, VAFC2 w/harnes
Friday morning bump before heading to Sears Point this weekend.
Trending Topics
07-22-2008, 08:34 AM
#10
Honda-Tech Member
Thread
Thread Starter
Forum
Replies
Last Post
Austin
Northern California (Sales)
10
07-14-2008 01:37 PM
