ITR LS-VTEC Turbo Inline Pro Precision
05-17-2015, 05:55 PM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Virginia
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
ITR LS-VTEC Turbo Inline Pro Precision
John
Fairfax, Va
703-789-1655
Cash/Credit Card accepted
Shipping and paypal are an option as well
17x7 Enkie RS5 Rims With BFG Tires $600
1999 Honda Civic Si OEM Rims With 205-50-15 BFG's Up Front and Nitto Neo Gens In The Rear $400 Or Trade For Steelies/Hubcaps Plus Cash but they must be big enough to fit Si front brakes
MITSUBISHI LANCER EVOLUTION 8-9
-Apexi N1 Cat Back Exhaust (fits with US AND JDM rear bumpers) $200/obo
-Act lightened flywheel (took out when upgrading to a twin disc) $100
-Whiteline Rear Sway Bar-$100 (not sure of diameter)
-Drivers side stanley taillight with black housing/yellow turn signal (small scratches/cracks)-$40
-GFB BOV-$75
-OEM/Stock turbo/manifold heat shields $45
Brand New K20 Or K24 Acura RDX Injectors WITHOUT CLIPS (ALL MOTOR) SOLD
RSX-S Shifter box with karcepts plate and dc sports short shifter $175
Spoon K Series LSD With Only 3 Passes On It SOLD (BRAND NEW IS $1,200+)
NRG "race" Steering wheel $75
NRG slim hub for EG/Integra ***SOLD***
NRG QUICK RELEASE ***SOLD***
1/ONE B-Series Solid Torque Mount (Hasport i believe) $40
96+ GSR Cams/Camshafts With PR3 Cam Gears (Some Rust) $100
Precision 440 Injectors (one has a small chip) $100
Unknown 550 Injectors $100
RC 660 Injectors $125
Blox half sized aluminum radiator EF,EG,EK,DC $125
SOLD SOLD or trade for B-Series/crx parts. I PAID OVER $1,500 FOR THIS
DSS stage 3.9 axles and hubs and extended wheel studs installed in Integra DA spindles with DA rotors/calipers and brand new bearings installed also. This setup was only driven on to the gas station/to get tuned/and to a shop to be parted out. So basically 15 minutes of driving and unfortunately no launches at all.
**Upper control arms dont come with it and the rims have been sold already***
Turbonetics T66 turbocharger T4 with A/R.55 in the intake housing. The exhaust side is A/R.81
I got this in a trade with unknown mileage but it looks really clean with no unusual shaft play left to right or in and out and spins freely.its been sitting around and not used since 2004. SOLD SOLD
Edelbrock Victor X Intake Manifold for s B16 or Type-R head. Brand New never used with hardware SOLD
-PTE 6262 Dual Ball Bearing Turbo T4 With Anti-Surge A/R .70 IN....A/R .68 EX SOLD SOLD
-Inline Pro T4 Manifold $200
-inline Pro T3 Manifold $200
-Inline Pro 600HP Intercooler $300
-Inline Pro BOV $125
-SFP 3" Downpipe $200
-Inline Pro Dump Tube/TurboSmart 38mm Hypergate $200
-Custom Intercooler Piping $150
$300 for both seats no rails $400 with painted rails.
Looking for seats for my 1989 CRX HF.
I have a set of blue sparco revs to possibly trade or just sell outright. Both seats have damage primarily from the oem seatbelt rubbing/tearing the fabric
****LONGBLOCKS******
I WILL NOT SEPERATE THE HEAD FROM THE BLOCKS AND SELL THEM SEPERATELY
*1999 JDM Acura Integra Type-R [Longblock=HEAD AND BLOCK ONLY] 70k miles SOLD
*Longblock With Accessories and Swap Parts $2,500 (engine,harness,ecu,axles,clutch,flywheel,shift linkage,alternator,starter,Intake Manifold,throttle body,injectors,header,NO MOUNTS
SOLD SOLD
*LS-Vtec B18A-GSR Head [Longblock=HEAD AND BLOCK ONLY] 2k miles $2,500
*Longblock With Accessories and Swap Parts $3,000 (engine,harness,ecu,alternator,starter,Intake Manifold,throttle body,injectors,header,NO MOUNTS
Less than 2000 miles ago Quality Engine went through the engine and replaced the rod and main bearings,rings,valves,valve guides,thrust washers,polished the crank,Supertech Retainers,resurfaced the head,rehoned the block (I have the receipt).
The Engine is still currently in the car for serious buyers.
Engine:
LS/VTEC 1.9L
PWO Chipped ECU, tuned (Dyno’d 194whp) (OBD0 CURRENTLY)
ARP Head Studs
AN-R Compact Header
Eagle Rods w/ ARP rod bolts
JE Pistons (app. 10.7:1 comp) 81.5mm
JE Rings
JG 65mm Throttle body
Skunk 2 Intake manifold
STR competition fuel rail
Carbon Fiber spark plug cover
NGK blue plug wires
NGK Spark Plugs
b18c5 Water Pump
b18c5 Oil Pump
b18c5 Timing Belt
b18c5 Dizzy
*NEW Bearings
*New FelProGaskets and O-rings
*NEW Supertech aluminum retainers & keepers
*Rebuilt Starter
Oil has been changed 4 times since it was rebuilt with Mobil 1.
OBD1 GSR Wiring Harness $100
OBD1 Distributor $100
OBD0 To OBD1 Conversion Harness $75
Used Honda Civic 99-00 metal z3 fenders. One is s little bent where the screws attatch. Should be able to flatten it out with a mallet/hammer $150/obo
Pioneer 7" touch screen double din AppRadio2 (SPH-DA100) SOLD
All prices are negotiable. I will accept trade offers as well.
ALL SALES ARE FINAL. NO RETURNS/EXCHANGES/PAYMENT PLANS. IT IS YOUR RESPONSIBILITY TO MAKE SURE THE PART FITS YOUR VEHICLE/SETUP AND WILL WORK FOR YOU.
Fairfax, Va
703-789-1655
Cash/Credit Card accepted
Shipping and paypal are an option as well
17x7 Enkie RS5 Rims With BFG Tires $600
1999 Honda Civic Si OEM Rims With 205-50-15 BFG's Up Front and Nitto Neo Gens In The Rear $400 Or Trade For Steelies/Hubcaps Plus Cash but they must be big enough to fit Si front brakes
MITSUBISHI LANCER EVOLUTION 8-9
-Apexi N1 Cat Back Exhaust (fits with US AND JDM rear bumpers) $200/obo
-Act lightened flywheel (took out when upgrading to a twin disc) $100
-Whiteline Rear Sway Bar-$100 (not sure of diameter)
-Drivers side stanley taillight with black housing/yellow turn signal (small scratches/cracks)-$40
-GFB BOV-$75
-OEM/Stock turbo/manifold heat shields $45
Brand New K20 Or K24 Acura RDX Injectors WITHOUT CLIPS (ALL MOTOR) SOLD
RSX-S Shifter box with karcepts plate and dc sports short shifter $175
Spoon K Series LSD With Only 3 Passes On It SOLD (BRAND NEW IS $1,200+)
NRG "race" Steering wheel $75
NRG slim hub for EG/Integra ***SOLD***
NRG QUICK RELEASE ***SOLD***
1/ONE B-Series Solid Torque Mount (Hasport i believe) $40
96+ GSR Cams/Camshafts With PR3 Cam Gears (Some Rust) $100
Precision 440 Injectors (one has a small chip) $100
Unknown 550 Injectors $100
RC 660 Injectors $125
Blox half sized aluminum radiator EF,EG,EK,DC $125
SOLD SOLD or trade for B-Series/crx parts. I PAID OVER $1,500 FOR THIS
DSS stage 3.9 axles and hubs and extended wheel studs installed in Integra DA spindles with DA rotors/calipers and brand new bearings installed also. This setup was only driven on to the gas station/to get tuned/and to a shop to be parted out. So basically 15 minutes of driving and unfortunately no launches at all.
**Upper control arms dont come with it and the rims have been sold already***
Turbonetics T66 turbocharger T4 with A/R.55 in the intake housing. The exhaust side is A/R.81
I got this in a trade with unknown mileage but it looks really clean with no unusual shaft play left to right or in and out and spins freely.its been sitting around and not used since 2004. SOLD SOLD
Edelbrock Victor X Intake Manifold for s B16 or Type-R head. Brand New never used with hardware SOLD
-PTE 6262 Dual Ball Bearing Turbo T4 With Anti-Surge A/R .70 IN....A/R .68 EX SOLD SOLD
-Inline Pro T4 Manifold $200
-inline Pro T3 Manifold $200
-Inline Pro 600HP Intercooler $300
-Inline Pro BOV $125
-SFP 3" Downpipe $200
-Inline Pro Dump Tube/TurboSmart 38mm Hypergate $200
-Custom Intercooler Piping $150
$300 for both seats no rails $400 with painted rails.
Looking for seats for my 1989 CRX HF.
I have a set of blue sparco revs to possibly trade or just sell outright. Both seats have damage primarily from the oem seatbelt rubbing/tearing the fabric
****LONGBLOCKS******
I WILL NOT SEPERATE THE HEAD FROM THE BLOCKS AND SELL THEM SEPERATELY
*1999 JDM Acura Integra Type-R [Longblock=HEAD AND BLOCK ONLY] 70k miles SOLD
*Longblock With Accessories and Swap Parts $2,500 (engine,harness,ecu,axles,clutch,flywheel,shift linkage,alternator,starter,Intake Manifold,throttle body,injectors,header,NO MOUNTS
SOLD SOLD
*LS-Vtec B18A-GSR Head [Longblock=HEAD AND BLOCK ONLY] 2k miles $2,500
*Longblock With Accessories and Swap Parts $3,000 (engine,harness,ecu,alternator,starter,Intake Manifold,throttle body,injectors,header,NO MOUNTS
Less than 2000 miles ago Quality Engine went through the engine and replaced the rod and main bearings,rings,valves,valve guides,thrust washers,polished the crank,Supertech Retainers,resurfaced the head,rehoned the block (I have the receipt).
The Engine is still currently in the car for serious buyers.
Engine:
LS/VTEC 1.9L
PWO Chipped ECU, tuned (Dyno’d 194whp) (OBD0 CURRENTLY)
ARP Head Studs
AN-R Compact Header
Eagle Rods w/ ARP rod bolts
JE Pistons (app. 10.7:1 comp) 81.5mm
JE Rings
JG 65mm Throttle body
Skunk 2 Intake manifold
STR competition fuel rail
Carbon Fiber spark plug cover
NGK blue plug wires
NGK Spark Plugs
b18c5 Water Pump
b18c5 Oil Pump
b18c5 Timing Belt
b18c5 Dizzy
*NEW Bearings
*New FelProGaskets and O-rings
*NEW Supertech aluminum retainers & keepers
*Rebuilt Starter
Oil has been changed 4 times since it was rebuilt with Mobil 1.
OBD1 GSR Wiring Harness $100
OBD1 Distributor $100
OBD0 To OBD1 Conversion Harness $75
Used Honda Civic 99-00 metal z3 fenders. One is s little bent where the screws attatch. Should be able to flatten it out with a mallet/hammer $150/obo
Pioneer 7" touch screen double din AppRadio2 (SPH-DA100) SOLD
All prices are negotiable. I will accept trade offers as well.
ALL SALES ARE FINAL. NO RETURNS/EXCHANGES/PAYMENT PLANS. IT IS YOUR RESPONSIBILITY TO MAKE SURE THE PART FITS YOUR VEHICLE/SETUP AND WILL WORK FOR YOU.
Last edited by slow sol; 06-30-2015 at 03:41 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post