H23A Bored Throttle Body (64mm) and port matched intake plenum with H23A intake manifold that has been de-burred and polished at the secondary butterfly plate inlet runners and runner outlets. No fuel rail or injectors. asking $400
Take the 64mm throttle body and port matched intake plenum for your JDM H22A as they share the same TB and plenum as the H23A. Just mate them with your current manifold. P13 HF4 / P13 HF3/ P13 HF1. For USDM or 5th Gen H22's with top mount Map sensors, u'll need to bracket mount your map sensor and connect to the TB via vacuum hose.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for HondaMarketPlace.com content, comments, or advertising. HondaMarketPlace.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse HondaMarketPlace.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.