DDTech stage 2 cams - b-series
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2013
Location: Perth, Western Australia
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
DDTech stage 2 cams - b-series
I'm selling a set of slightly used DDtech stage 2 cams.
These were installed for dialling, 20km's on road and a short dyno session, so pretty much new.
Should suit a good b18c or b20
Note - I had issues with the exhaust cam - DDtech has kindly offered to look at/fix any issue with the cam should you have similar problems.
I would have done this but am literally 1/2 a world away in Australia.
Price is $500 USD shipped
PM me if you have any queries or wish to buy.
Specs as follows:
DDTECH STAGE 2 – STREET/STRIP RACING CAMS, HIGH COMP/PORTING REQUIRED
Duration: 298° INT / 290° EXH | Duration @ .050” lift (checked at valve): 264° INT / 256° EXH
Cam Lift: .318” INT / .306” EXH |Gross* Valve Lift: .492” INT / .474” EXH
Primaries/Secondaries: 260° duration / 220° @ .050” / .241” cam lift / .362” gross* valve lift
*Gross lift figures are calculated WITHOUT valve lash.
Degreeing Information
**For degreeing purposes only – Please contact us for application specific centerline recommendations**
104° LSA – 100° ICL / 108° ECL | Valve Lash: .007” INT / .008” EXH | 1.55 VTEC rocker ratio
INTAKE OPENS 32° BTDC | INTAKE CLOSES 52° ABDC
EXHAUST OPENS 56° BBDC | EXHAUST CLOSES 20° ATDC
These were installed for dialling, 20km's on road and a short dyno session, so pretty much new.
Should suit a good b18c or b20
Note - I had issues with the exhaust cam - DDtech has kindly offered to look at/fix any issue with the cam should you have similar problems.
I would have done this but am literally 1/2 a world away in Australia.
Price is $500 USD shipped
PM me if you have any queries or wish to buy.
Specs as follows:
DDTECH STAGE 2 – STREET/STRIP RACING CAMS, HIGH COMP/PORTING REQUIRED
Duration: 298° INT / 290° EXH | Duration @ .050” lift (checked at valve): 264° INT / 256° EXH
Cam Lift: .318” INT / .306” EXH |Gross* Valve Lift: .492” INT / .474” EXH
Primaries/Secondaries: 260° duration / 220° @ .050” / .241” cam lift / .362” gross* valve lift
*Gross lift figures are calculated WITHOUT valve lash.
Degreeing Information
**For degreeing purposes only – Please contact us for application specific centerline recommendations**
104° LSA – 100° ICL / 108° ECL | Valve Lash: .007” INT / .008” EXH | 1.55 VTEC rocker ratio
INTAKE OPENS 32° BTDC | INTAKE CLOSES 52° ABDC
EXHAUST OPENS 56° BBDC | EXHAUST CLOSES 20° ATDC
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post