Darton Sleeved B18 B18A Block - Fully Built with Crower Rods, CP Pistons, Golden Eagle, lsvtec
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Feb 2001
Location: FIND ME ON ******.COM
Posts: 1,595
Likes: 0
Received 0 Likes
on
0 Posts
Darton Sleeved B18 B18A Block - Fully Built with Crower Rods, CP Pistons, Golden Eagle, lsvtec
I am selling a Darton Sleeved B18A block that was built by Jim Justice of Justice Racing Engines in Frederick (those of you who know Jim will know that his work is TOP QUALITY)
The block has 20k miles and will safely rev to 9500rpm
Specs
- 84mm Darton sleeves
- LS crank
- CP forged Pistons 12:1 CR
- Crower forged rods
- Golden Eagle 3-Main Girdle
Also comes with
- Water pump (20k miles)
- ITR oil pump (20k miles)
- Rear main seal (20k miles)
- Golden Eagle LS/Vtec adapter kit
- ARP headstuds
Not included
- Oil pickup/Windage Tray
- Oil pan
- Thermostat housing and water passage
- Alternator brackets
- Timing belt covers
Please do not inquire unless you have cash and are serious about purchasing.
Buyer pays shipping charges
Please keep in mind that the parts alone total well over $2000
NOTE:
This block is in perfect working condition, however, if you want best results you should probably get a light re-hone and new rings. That is just good practice whenever buying a used block, especially with forged internals.
The block has 20k miles and will safely rev to 9500rpm
Specs
- 84mm Darton sleeves
- LS crank
- CP forged Pistons 12:1 CR
- Crower forged rods
- Golden Eagle 3-Main Girdle
Also comes with
- Water pump (20k miles)
- ITR oil pump (20k miles)
- Rear main seal (20k miles)
- Golden Eagle LS/Vtec adapter kit
- ARP headstuds
Not included
- Oil pickup/Windage Tray
- Oil pan
- Thermostat housing and water passage
- Alternator brackets
- Timing belt covers
Please do not inquire unless you have cash and are serious about purchasing.
Buyer pays shipping charges
Please keep in mind that the parts alone total well over $2000
NOTE:
This block is in perfect working condition, however, if you want best results you should probably get a light re-hone and new rings. That is just good practice whenever buying a used block, especially with forged internals.
Thread
Thread Starter
Forum
Replies
Last Post
boosted1996
Classifieds: Forced Induction
2
04-29-2017 10:48 PM
Inspector Gadget
Northwest (Sales)
4
08-29-2008 01:41 PM
JOHN WAYNE
Mid-Atlantic (Sales)
20
09-18-2007 10:54 PM
J-Brooks
Classifieds: Forced Induction
8
07-09-2005 11:44 PM