*** fully built k24a2 block and k20a2 head and tranny
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: flushing, ny, queez
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
*** fully built k24a2 block and k20a2 head and tranny
--------------------------------------------------------------------------------
ok i would like to sell my k24 turbo setup (fully fully built) ok so i have a tsx block type s head and tranny motor only has 300 miles on it car was in a accident while i was breaking the motor in .. Swap fit in eg/dc shells when i mean i got it all i mean i got it all to swap into ur car.. looking for the best offer i really need money in 16k into this swap not including purchasing the blck tranny and head here is a list of everything i did to the motor
block # 1016252 K24a2 (VIN JH4CL95824C013164)
AEBS Sleeves
ARP Headstuds
Cometic K24 headgasket
RC1000cc injectors
KPro
CP Pistons: 3.465"
K1 Rods
K20A2 head, ported and polished
Supertech valves, dual springs
Golden Eagle oil squirter block off
Balanced crank @ Storm Crankshaft
ACL Race Bearings Std sz.
RBC Manifold
Karcepts RBC/A2 adapter
Hondata gasket
Full Race GT35R kit
Full Blown Dual Walbro kit w/ GS341 and GS342 pumps.
-10an Fuel feed line
-8an Fuel return line
AEM Fuel rail
Fuel Lab inline Fuel filter -10an
Aeromotive regulator
Custom 3" VRS exhaust piping w/ V Band
Apexi WS II 3" Turbo muffler.
quafe lsd 50/50 to each wheel
the motor is built to handle 800 whp easy... RPM did my whole motor built tommy can vouch for this motor 10000% if there are any doubts call tommy he will back my whole story about the accident and the milage also the power it produces.. And if u been to rpm in the last 4 months it was the motor in the black eg coupe with the white type r wheels thanks like i said 16k looking for best offer everything listed will come with the motor .. thanks b20 PLEASE BUMP IF VIEWED
__________________
<-----NOW GONE RIP/ NEW COUPE IN THE MAKING
EJ1 CREW MEMBER #2
ok i would like to sell my k24 turbo setup (fully fully built) ok so i have a tsx block type s head and tranny motor only has 300 miles on it car was in a accident while i was breaking the motor in .. Swap fit in eg/dc shells when i mean i got it all i mean i got it all to swap into ur car.. looking for the best offer i really need money in 16k into this swap not including purchasing the blck tranny and head here is a list of everything i did to the motor
block # 1016252 K24a2 (VIN JH4CL95824C013164)
AEBS Sleeves
ARP Headstuds
Cometic K24 headgasket
RC1000cc injectors
KPro
CP Pistons: 3.465"
K1 Rods
K20A2 head, ported and polished
Supertech valves, dual springs
Golden Eagle oil squirter block off
Balanced crank @ Storm Crankshaft
ACL Race Bearings Std sz.
RBC Manifold
Karcepts RBC/A2 adapter
Hondata gasket
Full Race GT35R kit
Full Blown Dual Walbro kit w/ GS341 and GS342 pumps.
-10an Fuel feed line
-8an Fuel return line
AEM Fuel rail
Fuel Lab inline Fuel filter -10an
Aeromotive regulator
Custom 3" VRS exhaust piping w/ V Band
Apexi WS II 3" Turbo muffler.
quafe lsd 50/50 to each wheel
the motor is built to handle 800 whp easy... RPM did my whole motor built tommy can vouch for this motor 10000% if there are any doubts call tommy he will back my whole story about the accident and the milage also the power it produces.. And if u been to rpm in the last 4 months it was the motor in the black eg coupe with the white type r wheels thanks like i said 16k looking for best offer everything listed will come with the motor .. thanks b20 PLEASE BUMP IF VIEWED
__________________
<-----NOW GONE RIP/ NEW COUPE IN THE MAKING
EJ1 CREW MEMBER #2
Thread
Thread Starter
Forum
Replies
Last Post