**********Finished my build, garage sale time. Something for everyone**********
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Bay Area, CA, US
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
**********Finished my build, garage sale time. Something for everyone**********
All prices are OBO and include shipping, obviously the price will be less if you meet me.
I am located in Nor Cal, about an hour south of San Jose but go there all the time for work. If we do a meet up though I would prefer at the Gilroy outlets. Otherwise, if I ship, I will do my best to have your item shipped and have a tracking number for you the next day, as long as you pay me before noon California time.
>>>>>>>>>>>>>>>NOT IN THE PICTURES<<<<<<<<<<<<<<<
I have a Odyssey PC680 Battery. SOLD
I have the lines to delete the ABS in your in your Integra. SOLD
I have a Blox Billet 68mm throttle body that works fine I just had to go with a bigger one with the new motor I put in. SOLD
You will be getting a ACT 6 puck unsprung disk, heavy duty pressure plate and a Fidanza 8lb flywheel. SOLD
I have a black Skunk 2 Vtec solenoid cover for a small top solenoid. SOLD
Black set of MSD wires. SOLD
I have a set of Golden Eagle head studs for GSR. SOLD
I have a set of ARP head studs for GSR. SOLD
I have a set of OLD SCHOOL SKUNK CAMS, Stage 3. Made a TON of power on these cams but I am sticking with my Blox Bs for my current build. Just like the clutch set up, only 4 dyno passes and 4 passes at the track. They look like new. Asking price is $400FIRM SHIPPED!! (They are my brother's cams)
I have a sets of MSD 8.5mm Super Conductor wires, a red set. The red set was used on my 2.2 liter, so only a few dyno passes and some time at the track. Either set looks like it just came from the box. Asking price, $45 OBO for either one, SHIPPED!! PENDING
I have a Vtec B series timing belt that I used on my old motor, bout 5 k on it. I took the old one off and did a big tune up including dumping my AEM cam gears so I decided to put a new belt on. Asking price, $25 OBO SHIPPED!!
I have a OBD1 BIG TOP Vtec solenoid that worked perfect when it was on my car except the top gasket has a tiny leak but that's OK because I am throwing in a new gasket for the top half. After that, it will work perfect. Asking price, $65 OBO SHIPPED!!
I have a generic ECU jumper that I used on my 97 integra to run a chipped P28. I used this 2 times, yep twice, then jumped the gun and bought a Rywire harness that has this integrated in it. Asking price, $35 OBO SHIPPED!!
I have a filter for a Blox velocity stack, decided not to run a filter when the stack is on so it can go. $20 OBO shipped or with any other item for free, you pay shipping.
I have a B series valve cover that has been cut for gears, shaved and black wrinkle coated and is flawless. It is as straight as an arrow with no bondo underneath, all metal. I had to do this thing, strip it down and start all over again 3 times before it came out perfect. I used this to get my car tuned then took it off when I tuned my car incase any cops popped my hood. Asking price, $110 FIRM SHIPPED!!
I have a bunch of miscellaneous MSD wires, connectors, clamps, boots etc, Shoot me an offer on anything you see.
I have a black dash with air bag, rear quarter panels and door panels that are in ok condition. I had to modify them to make them fit my 97 GSR, it come from an integra without a side impact beam and I had to work around that. They aren't perfect, but your would be 80% close to changing your car from peanut butter to black. $75 OBO picked up for everything, and I will throw in a climate control.
I have a stock white GSR spoiler, just pick this thing up and take it.
I am located in Nor Cal, about an hour south of San Jose but go there all the time for work. If we do a meet up though I would prefer at the Gilroy outlets. Otherwise, if I ship, I will do my best to have your item shipped and have a tracking number for you the next day, as long as you pay me before noon California time.
>>>>>>>>>>>>>>>NOT IN THE PICTURES<<<<<<<<<<<<<<<
I have a Odyssey PC680 Battery. SOLD
I have the lines to delete the ABS in your in your Integra. SOLD
I have a Blox Billet 68mm throttle body that works fine I just had to go with a bigger one with the new motor I put in. SOLD
You will be getting a ACT 6 puck unsprung disk, heavy duty pressure plate and a Fidanza 8lb flywheel. SOLD
I have a black Skunk 2 Vtec solenoid cover for a small top solenoid. SOLD
Black set of MSD wires. SOLD
I have a set of Golden Eagle head studs for GSR. SOLD
I have a set of ARP head studs for GSR. SOLD
I have a set of OLD SCHOOL SKUNK CAMS, Stage 3. Made a TON of power on these cams but I am sticking with my Blox Bs for my current build. Just like the clutch set up, only 4 dyno passes and 4 passes at the track. They look like new. Asking price is $400FIRM SHIPPED!! (They are my brother's cams)
I have a sets of MSD 8.5mm Super Conductor wires, a red set. The red set was used on my 2.2 liter, so only a few dyno passes and some time at the track. Either set looks like it just came from the box. Asking price, $45 OBO for either one, SHIPPED!! PENDING
I have a Vtec B series timing belt that I used on my old motor, bout 5 k on it. I took the old one off and did a big tune up including dumping my AEM cam gears so I decided to put a new belt on. Asking price, $25 OBO SHIPPED!!
I have a OBD1 BIG TOP Vtec solenoid that worked perfect when it was on my car except the top gasket has a tiny leak but that's OK because I am throwing in a new gasket for the top half. After that, it will work perfect. Asking price, $65 OBO SHIPPED!!
I have a generic ECU jumper that I used on my 97 integra to run a chipped P28. I used this 2 times, yep twice, then jumped the gun and bought a Rywire harness that has this integrated in it. Asking price, $35 OBO SHIPPED!!
I have a filter for a Blox velocity stack, decided not to run a filter when the stack is on so it can go. $20 OBO shipped or with any other item for free, you pay shipping.
I have a B series valve cover that has been cut for gears, shaved and black wrinkle coated and is flawless. It is as straight as an arrow with no bondo underneath, all metal. I had to do this thing, strip it down and start all over again 3 times before it came out perfect. I used this to get my car tuned then took it off when I tuned my car incase any cops popped my hood. Asking price, $110 FIRM SHIPPED!!
I have a bunch of miscellaneous MSD wires, connectors, clamps, boots etc, Shoot me an offer on anything you see.
I have a black dash with air bag, rear quarter panels and door panels that are in ok condition. I had to modify them to make them fit my 97 GSR, it come from an integra without a side impact beam and I had to work around that. They aren't perfect, but your would be 80% close to changing your car from peanut butter to black. $75 OBO picked up for everything, and I will throw in a climate control.
I have a stock white GSR spoiler, just pick this thing up and take it.
Last edited by NUISANCE; 02-15-2011 at 11:58 PM.
#3
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Bay Area, CA, US
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Re: **********Finished my build, garage sale time. Something for everyone**********
Sent my paypal addy to you VIA PM. Will for sure ship it out tomorrow if I get payment today.
Trending Topics
#19
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Bay Area, CA, US
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Re: **********Finished my build, garage sale time. Something for everyone**********
Prices dropped and post updated.
BTW, I will beat any price you find on Honda-tech. SHow me the price and I will beat it. Everything has to go
BTW, I will beat any price you find on Honda-tech. SHow me the price and I will beat it. Everything has to go
Thread
Thread Starter
Forum
Replies
Last Post
NUISANCE
Northern California (Sales)
9
02-25-2011 08:58 PM