RicTRD

Been doin' the front splitter for better downforce, but as the OE front lip is very high, about 18 cm from the ground, I did a vertical piece to down the splitter 8 cm with a piece of aluminum, so with this the splitter is at 9 cm from the ground, I think this will help to get better aerodinamics at the road track, just painted in black to see how it looks, but I think will put it in red... what you guys think?

Sorry for the lack of pics, took them with the cellular

Reza^

nice work~

is the black bottom piece fiberglass?

NTCustoms

wow this is exactly how i was going to make mine. stole the idea right out of my head!

.:Made in OC:.

nice work. The splitter looks a bit thin though... what are the materials and thickness?

RicTRD

The splitter is fiberglass and is about 3mm

get RIGHT

Nice job. Im interested in hearing your on track assessment as well.

RicTRD

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by get RIGHT &raquo;</TD></TR><TR><TD CLASS="quote">Nice job. Im interested in hearing your on track assessment as well. </TD></TR></TABLE>

Thanks!, I'll be testing the car next week and see if there's a remarkable difference...

NTCustoms

how are you attaching the splitter to the car? the rear portion specifically.

RicTRD

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NTCustoms &raquo;</TD></TR><TR><TD CLASS="quote">how are you attaching the splitter to the car? the rear portion specifically.</TD></TR></TABLE>

I have drilled 2 holes at the rear of the subframe at each side and then bolt the rear of the splitter with nuts at the top.

NTCustoms

ok that's what i had thought in the first place. seeing these pics makes me want to start already lol. how thick is the aluminum you used for the air dam?