Honda-Tech - Honda Forum Discussion

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)
-   Forced Induction (https://honda-tech.com/forums/forced-induction-16/)
-   -   How much would a turbo kit cost to install? (https://honda-tech.com/forums/forced-induction-16/how-much-would-turbo-kit-cost-install-97363/)

Diversifiedsalez 12-04-2001 07:13 PM

How much would a turbo kit cost to install?
 
A drag kit on a 1994 h22 prelude....how much do you think?

What about getting it tuned as well?

forcefed 12-04-2001 07:41 PM

Re: How much would a turbo kit cost to install? (Diversifiedsalez)
 
it depends who you go to? shop, 700-850, someone in garage 500, i know these guy's who do it out of their garage they charge 500 + fittings ect., and they do it clean as i've seen.

Charles B. 12-04-2001 11:10 PM

Re: How much would a turbo kit cost to install? (forcefed)
 
I know this guy who has a GSR and RS motorworks in torrance installed his DRAG kit for him for 500. Install included his ignition setup and boost guage.

rtype11 12-05-2001 05:30 AM

Re: How much would a turbo kit cost to install? (Diversifiedsalez)
 
whoever should just charge you the full day 8 hours, especially for Prelude, its harder to work on than a teg - no room. dont forget to do the clutch

quick108 12-05-2001 09:29 AM

Re: How much would a turbo kit cost to install? (rtype11)
 
If you have a brand new kit and a garage, I might do it for you.

-JP

GSRwBOOST 12-05-2001 09:33 AM

Re: How much would a turbo kit cost to install? (quick108)
 
self install, just have some good tools and a friend to help you..

nothing more satisfying and informative than doing it yourself.

Rob03Pro5 12-05-2001 09:34 AM

Re: How much would a turbo kit cost to install? (GSRwBOOST)
 
Ya, do it yourself. It's cheaper and you learn alot more that way.

Immortal23 12-05-2001 09:44 AM

Re: How much would a turbo kit cost to install? (Diversifiedsalez)
 
I would like to do it myself...im juss scared of messing something up. i would really need a lot of help. The kit is not brand new...It is used. Here is what is in the kit:
T3/T4 Turbonetics
Turbo Type R GReddy Blow Off Valve
Delta Wastegate
Drag Manifold For H22
Piping and Intercooler (Front Mount)
Bosch Fuel Pump
4 RC 440 CC/MIN Injectors
APEX AFC Fuel Controller
NOS Feul pressure regulator
APEX AVCR Boost Controller
Akimoto Air

How does this set up sound? Its going on a 1994 prelude Vtec.
thanks

ILOVEGIRLS 12-05-2001 11:17 AM

Re: How much would a turbo kit cost to install? (Immortal23)
 
i think there are some members on this board that has pretty close detailed pictures and guide. its not that hard..you just need to understand what does what.

Damon B. 12-05-2001 12:32 PM

Re: How much would a turbo kit cost to install? (ILOVEGIRLS)
 
Just do the damn thing, that way you can trouble shoot if a problem does come up.

MiraiZ 12-05-2001 01:33 PM

Re: How much would a turbo kit cost to install? (Immortal23)
 
don't rush it...take a few weeks to research an install (if you do decide to do it yourself)...some people are more mechanically inclined than others, so read some books and post and gauge yourself on how much you understand before you start... my two yen...

ForcedAccord 12-05-2001 01:37 PM

Re: How much would a turbo kit cost to install? (MiraiZ)
 
Yeah but worse comes to worse, I don't know how many people have completed setups when self installing from coming on here and begging for help in their times of need http://images.zeroforum.com/smile/emsmile.gif

Immortal23 12-05-2001 01:49 PM

Re: How much would a turbo kit cost to install? (Diversifiedsalez)
 
Thanks for the advice guys...im looking into getting it done professionally. Ive been quoted 600 bucks.

ForcedAccord 12-05-2001 01:51 PM

Re: How much would a turbo kit cost to install? (Immortal23)
 
That's always the safe way to go, just would be fun to do w/ a couple friends!

Immortal23 12-05-2001 01:53 PM

Re: How much would a turbo kit cost to install? (Diversifiedsalez)
 
yeah i think it would be really fun...i juss dont think i can trust myself. I dont want to end up with a blown motor or someting like that. Im still not sure. Anyone in So cali think they can help me out with the install?


All times are GMT -8. The time now is 01:20 PM.


© 2024 MH Sub I, LLC dba Internet Brands